On 24.11.21 15:50, Dan Carpenter wrote:
If the last channel is not available then "dev" is freed. Fortunately,
we can just use "pdev->irq" instead.
Also we should check if at least one channel was set up.
Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card")
Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Acked-by: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
Tested-by: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
Thanks Dan!
---
v3: add a check for if there is a channel.
v2: fix a bug in v1. Only one channel is required but my patch returned
if any channel was unavailable.
drivers/net/can/sja1000/ems_pcmcia.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/net/can/sja1000/ems_pcmcia.c b/drivers/net/can/sja1000/ems_pcmcia.c
index e21b169c14c0..4642b6d4aaf7 100644
--- a/drivers/net/can/sja1000/ems_pcmcia.c
+++ b/drivers/net/can/sja1000/ems_pcmcia.c
@@ -234,7 +234,12 @@ static int ems_pcmcia_add_card(struct pcmcia_device *pdev, unsigned long base)
free_sja1000dev(dev);
}
- err = request_irq(dev->irq, &ems_pcmcia_interrupt, IRQF_SHARED,
+ if (!card->channels) {
+ err = -ENODEV;
+ goto failure_cleanup;
+ }
+
+ err = request_irq(pdev->irq, &ems_pcmcia_interrupt, IRQF_SHARED,
DRV_NAME, card);
if (!err)
return 0;
