On 24.11.21 09:57, Dan Carpenter wrote:
On Wed, Nov 24, 2021 at 08:37:27AM +0100, Oliver Hartkopp wrote:
Hello Dan,
On 24.11.21 07:56, Dan Carpenter wrote:
If the last channel is not available then "dev" is freed. Fortunately,
we can just use "pdev->irq" instead.
But in the case that we do not find any channel the irq for the card is
still requested (via pdev->irq).
Fixes: fd734c6f25ae ("can/sja1000: add driver for EMS PCMCIA card")
Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
---
v2: In the first version, I just failed the probe. Sorry about that.
drivers/net/can/sja1000/ems_pcmcia.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/can/sja1000/ems_pcmcia.c b/drivers/net/can/sja1000/ems_pcmcia.c
index e21b169c14c0..391a8253ed6f 100644
--- a/drivers/net/can/sja1000/ems_pcmcia.c
+++ b/drivers/net/can/sja1000/ems_pcmcia.c
@@ -234,7 +234,7 @@ static int ems_pcmcia_add_card(struct pcmcia_device *pdev, unsigned long base)
free_sja1000dev(dev);
}
- err = request_irq(dev->irq, &ems_pcmcia_interrupt, IRQF_SHARED,
When adding this check, we should be fine:
+ if (card->channels)
Sure, I will send a v3 with that.
With these discussed changes you might directly add my
Tested-by: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
Thanks,
Oliver
