Hi
On 11/15/21 4:48 PM, Jarkko Nikula wrote:
Hi
On 11/15/21 11:18 AM, Matthias Schiffer wrote:
When testing the CAN controller on our Ekhart Lake hardware, we
determined that all communication was running with twice the configured
bitrate. Changing the reference clock rate from 100MHz to 200MHz fixed
this. Intel's support has confirmed to us that 200MHz is indeed the
correct clock rate.
Fixes: cab7ffc0324f ("can: m_can: add PCI glue driver for Intel
Elkhart Lake")
Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
---
drivers/net/can/m_can/m_can_pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/can/m_can/m_can_pci.c
b/drivers/net/can/m_can/m_can_pci.c
index 89cc3d41e952..d3c030a13cbe 100644
--- a/drivers/net/can/m_can/m_can_pci.c
+++ b/drivers/net/can/m_can/m_can_pci.c
@@ -18,7 +18,7 @@
#define M_CAN_PCI_MMIO_BAR 0
-#define M_CAN_CLOCK_FREQ_EHL 100000000
+#define M_CAN_CLOCK_FREQ_EHL 200000000
#define CTL_CSR_INT_CTL_OFFSET 0x508
I'll double check this from HW people but at quick test on an HW I have
the signals on an oscilloscope were having 1 us shortest cycle (~500 ns
low, ~500 ns high) when testing like below:
ip link set can0 type can bitrate 1000000 dbitrate 2000000 fd on
I got confirmation the clock to CAN controller is indeed changed from
100 MHz to 200 MHz in release HW & firmware.
I haven't upgraded the FW in a while on our HW so that perhaps explain
why I was seeing expected rate :-)
So which one is more appropriate:
Acked-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
or
Reviewed-by: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
