[PATCH net-next 08/15] can: dev: add can_tdc_get_relative_tdco() helper function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>

struct can_tdc::tdco represents the absolute offset from TDCV. Some
controllers use instead an offset relative to the Sample Point (SP)
such that:
| SSP = TDCV + absolute TDCO
|     = TDCV + SP + relative TDCO

Consequently:
| relative TDCO = absolute TDCO - SP

The function can_tdc_get_relative_tdco() allow to retrieve this
relative TDCO value.

Link: https://lore.kernel.org/all/20210918095637.20108-7-mailhol.vincent@xxxxxxxxxx
CC: Stefan Mätje <Stefan.Maetje@xxxxxx>
Signed-off-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
 include/linux/can/dev.h | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index b4aa0f048cab..45f19d9db5ca 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -102,6 +102,35 @@ static inline bool can_tdc_is_enabled(const struct can_priv *priv)
 	return !!(priv->ctrlmode & CAN_CTRLMODE_TDC_MASK);
 }
 
+/*
+ * can_get_relative_tdco() - TDCO relative to the sample point
+ *
+ * struct can_tdc::tdco represents the absolute offset from TDCV. Some
+ * controllers use instead an offset relative to the Sample Point (SP)
+ * such that:
+ *
+ * SSP = TDCV + absolute TDCO
+ *     = TDCV + SP + relative TDCO
+ *
+ * -+----------- one bit ----------+-- TX pin
+ *  |<--- Sample Point --->|
+ *
+ *                         --+----------- one bit ----------+-- RX pin
+ *  |<-------- TDCV -------->|
+ *                           |<------------------------>| absolute TDCO
+ *                           |<--- Sample Point --->|
+ *                           |                      |<->| relative TDCO
+ *  |<------------- Secondary Sample Point ------------>|
+ */
+static inline s32 can_get_relative_tdco(const struct can_priv *priv)
+{
+	const struct can_bittiming *dbt = &priv->data_bittiming;
+	s32 sample_point_in_tc = (CAN_SYNC_SEG + dbt->prop_seg +
+				  dbt->phase_seg1) * dbt->brp;
+
+	return (s32)priv->tdc.tdco - sample_point_in_tc;
+}
+
 /* helper to define static CAN controller features at device creation time */
 static inline void can_set_static_ctrlmode(struct net_device *dev,
 					   u32 static_mode)
-- 
2.33.0





[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux