On Mon. 16 août 2021 at 17:12, Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> wrote:
> On 14.08.2021 19:17:28, Vincent Mailhol wrote:
> > At high bit rates, the propagation delay from the TX pin to the RX pin
> > of the transceiver causes measurement errors: the sample point on the
> > RX pin might occur on the previous bit.
> >
> > This issue is addressed in ISO 11898-1 section 11.3.3 "Transmitter
> > delay compensation" (TDC).
> >
> > This patch brings command line support to nine TDC parameters which
> > were recently added to the kernel's CAN netlink interface in order to
> > implement TDC:
> > - IFLA_CAN_TDC_TDCV_MIN: Transmitter Delay Compensation Value
> > minimum value
> > - IFLA_CAN_TDC_TDCV_MAX: Transmitter Delay Compensation Value
> > maximum value
> > - IFLA_CAN_TDC_TDCO_MIN: Transmitter Delay Compensation Offset
> > minimum value
> > - IFLA_CAN_TDC_TDCO_MAX: Transmitter Delay Compensation Offset
> > maximum value
> > - IFLA_CAN_TDC_TDCF_MIN: Transmitter Delay Compensation Filter
> > window minimum value
> > - IFLA_CAN_TDC_TDCF_MAX: Transmitter Delay Compensation Filter
> > window maximum value
> > - IFLA_CAN_TDC_TDCV: Transmitter Delay Compensation Value
> > - IFLA_CAN_TDC_TDCO: Transmitter Delay Compensation Offset
> > - IFLA_CAN_TDC_TDCF: Transmitter Delay Compensation Filter window
> >
> > All those new parameters are nested together into the attribute
> > IFLA_CAN_TDC.
> >
> > A tdc-mode parameter allow to specify how to operate. Valid options
> > are:
> >
> > * auto: the transmitter automatically measures TDCV. As such, TDCV
> > values can not be manually provided. In this mode, the user must
> > specify TDCO and may also specify TDCF if supported.
> >
> > * manual: Use the TDCV value provided by the user are used. In this
> ^^^^^ ^^^
> singular plural
ACK. I fixed that broken grammar in my local branch. As commented
before, I will send the next version of the iproute series after
we agree on the kernel part (unless someone finds a major issue).
FYI, this is the fixed sentence:
* manual: use a static TDCV provided by the user. In this mode, the
user must specify both TDCV and TDCO and may also specify TDCF if
supported.
Yours sincerely,
Vincent
