> -----Original Message-----
> From: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> Sent: 2021年2月26日 17:25
> To: mkl@xxxxxxxxxxxxxx; David S. Miller <davem@xxxxxxxxxxxxx>; Jakub
> Kicinski <kuba@xxxxxxxxxx>; Oliver Hartkopp <socketcan@xxxxxxxxxxxx>;
> Robin van der Gracht <robin@xxxxxxxxxxx>
> Cc: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>; Andre Naujoks
> <nautsch2@xxxxxxxxx>; Eric Dumazet <edumazet@xxxxxxxxxx>;
> kernel@xxxxxxxxxxxxxx; linux-can@xxxxxxxxxxxxxxx; netdev@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx
> Subject: [PATCH net v4 1/1] can: can_skb_set_owner(): fix ref counting if socket
> was closed before setting skb ownership
>
> There are two ref count variables controlling the free()ing of a socket:
> - struct sock::sk_refcnt - which is changed by sock_hold()/sock_put()
> - struct sock::sk_wmem_alloc - which accounts the memory allocated by
> the skbs in the send path.
>
> In case there are still TX skbs on the fly and the socket() is closed, the struct
> sock::sk_refcnt reaches 0. In the TX-path the CAN stack clones an "echo" skb,
> calls sock_hold() on the original socket and references it. This produces the
> following back trace:
>
> | WARNING: CPU: 0 PID: 280 at lib/refcount.c:25
> | refcount_warn_saturate+0x114/0x134
> | refcount_t: addition on 0; use-after-free.
> | Modules linked in: coda_vpu(E) v4l2_jpeg(E) videobuf2_vmalloc(E)
> imx_vdoa(E)
> | CPU: 0 PID: 280 Comm: test_can.sh Tainted: G E
> 5.11.0-04577-gf8ff6603c617 #203
> | Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
> | Backtrace:
> | [<80bafea4>] (dump_backtrace) from [<80bb0280>] (show_stack+0x20/0x24)
> | r7:00000000 r6:600f0113 r5:00000000 r4:81441220 [<80bb0260>]
> | (show_stack) from [<80bb593c>] (dump_stack+0xa0/0xc8) [<80bb589c>]
> | (dump_stack) from [<8012b268>] (__warn+0xd4/0x114) r9:00000019
> | r8:80f4a8c2 r7:83e4150c r6:00000000 r5:00000009 r4:80528f90
> | [<8012b194>] (__warn) from [<80bb09c4>] (warn_slowpath_fmt+0x88/0xc8)
> | r9:83f26400 r8:80f4a8d1 r7:00000009 r6:80528f90 r5:00000019
> | r4:80f4a8c2 [<80bb0940>] (warn_slowpath_fmt) from [<80528f90>]
> | (refcount_warn_saturate+0x114/0x134) r8:00000000 r7:00000000
> | r6:82b44000 r5:834e5600 r4:83f4d540 [<80528e7c>]
> | (refcount_warn_saturate) from [<8079a4c8>]
> | (__refcount_add.constprop.0+0x4c/0x50)
> | [<8079a47c>] (__refcount_add.constprop.0) from [<8079a57c>]
> | (can_put_echo_skb+0xb0/0x13c) [<8079a4cc>] (can_put_echo_skb) from
> | [<8079ba98>] (flexcan_start_xmit+0x1c4/0x230) r9:00000010 r8:83f48610
> | r7:0fdc0000 r6:0c080000 r5:82b44000 r4:834e5600 [<8079b8d4>]
> | (flexcan_start_xmit) from [<80969078>] (netdev_start_xmit+0x44/0x70)
> | r9:814c0ba0 r8:80c8790c r7:00000000 r6:834e5600 r5:82b44000
> | r4:82ab1f00 [<80969034>] (netdev_start_xmit) from [<809725a4>]
> | (dev_hard_start_xmit+0x19c/0x318) r9:814c0ba0 r8:00000000 r7:82ab1f00
> | r6:82b44000 r5:00000000 r4:834e5600 [<80972408>] (dev_hard_start_xmit)
> | from [<809c6584>] (sch_direct_xmit+0xcc/0x264) r10:834e5600
> | r9:00000000 r8:00000000 r7:82b44000 r6:82ab1f00 r5:834e5600
> | r4:83f27400 [<809c64b8>] (sch_direct_xmit) from [<809c6c0c>]
> | (__qdisc_run+0x4f0/0x534)
>
> To fix this problem, only set skb ownership to sockets which have still a ref
> count > 0.
>
> Cc: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
> Cc: Andre Naujoks <nautsch2@xxxxxxxxx>
> Suggested-by: Eric Dumazet <edumazet@xxxxxxxxxx>
> Fixes: 0ae89beb283a ("can: add destructor for self generated skbs")
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
I will give out a test result tomorrow when the board is available. 😊
Best Regards,
Joakim Zhang
> ---
> include/linux/can/skb.h | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/can/skb.h b/include/linux/can/skb.h index
> 685f34cfba20..d82018cc0d0b 100644
> --- a/include/linux/can/skb.h
> +++ b/include/linux/can/skb.h
> @@ -65,8 +65,12 @@ static inline void can_skb_reserve(struct sk_buff *skb)
>
> static inline void can_skb_set_owner(struct sk_buff *skb, struct sock *sk) {
> - if (sk) {
> - sock_hold(sk);
> + /*
> + * If the socket has already been closed by user space, the refcount may
> + * already be 0 (and the socket will be freed after the last TX skb has
> + * been freed). So only increase socket refcount if the refcount is > 0.
> + */
> + if (sk && refcount_inc_not_zero(&sk->sk_refcnt)) {
> skb->destructor = sock_efree;
> skb->sk = sk;
> }
> --
> 2.29.2
