The sizeof(u32) is hardcoded. It's better to use the config value in
regmap.
It increases the size of target object, but it's flexible when new mcp chip
need other val_bytes.
Signed-off-by: Su Yanjun <suyanjun218@xxxxxxxxx>
---
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
index f07e8b737d31..3dde52669343 100644
--- a/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
+++ b/drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c
@@ -1308,6 +1308,7 @@ mcp251xfd_tef_obj_read(const struct mcp251xfd_priv *priv,
const u8 offset, const u8 len)
{
const struct mcp251xfd_tx_ring *tx_ring = priv->tx;
+ int val_bytes = regmap_get_val_bytes(priv->map_reg);
if (IS_ENABLED(CONFIG_CAN_MCP251XFD_SANITY) &&
(offset > tx_ring->obj_num ||
@@ -1322,7 +1323,7 @@ mcp251xfd_tef_obj_read(const struct mcp251xfd_priv *priv,
return regmap_bulk_read(priv->map_rx,
mcp251xfd_get_tef_obj_addr(offset),
hw_tef_obj,
- sizeof(*hw_tef_obj) / sizeof(u32) * len);
+ sizeof(*hw_tef_obj) / val_bytes * len);
}
static int mcp251xfd_handle_tefif(struct mcp251xfd_priv *priv)
@@ -1511,11 +1512,12 @@ mcp251xfd_rx_obj_read(const struct mcp251xfd_priv *priv,
const u8 offset, const u8 len)
{
int err;
+ int val_bytes = regmap_get_val_bytes(priv->map_reg);
err = regmap_bulk_read(priv->map_rx,
mcp251xfd_get_rx_obj_addr(ring, offset),
hw_rx_obj,
- len * ring->obj_size / sizeof(u32));
+ len * ring->obj_size / val_bytes);
return err;
}
@@ -2139,6 +2141,7 @@ static irqreturn_t mcp251xfd_irq(int irq, void *dev_id)
struct mcp251xfd_priv *priv = dev_id;
irqreturn_t handled = IRQ_NONE;
int err;
+ int val_bytes = regmap_get_val_bytes(priv->map_reg);
if (priv->rx_int)
do {
@@ -2162,7 +2165,7 @@ static irqreturn_t mcp251xfd_irq(int irq, void *dev_id)
err = regmap_bulk_read(priv->map_reg, MCP251XFD_REG_INT,
&priv->regs_status,
sizeof(priv->regs_status) /
- sizeof(u32));
+ val_bytes);
if (err)
goto out_fail;
--
2.25.1
