This patch changes the order in which the flexcan controller is brought up during flexcan_open(). It makes sure that the chip is completely initialized before the IRQs are requested and finally enabled. Link: https://lore.kernel.org/r/20201119100917.3013281-5-mkl@xxxxxxxxxxxxxx Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/flexcan.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 0705b6384e49..e98368be1669 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1712,32 +1712,33 @@ static int flexcan_open(struct net_device *dev) if (err) goto out_close; - err = request_irq(dev->irq, flexcan_irq, IRQF_SHARED, dev->name, dev); + err = flexcan_rx_offload_setup(dev); if (err) goto out_transceiver_disable; - err = flexcan_rx_offload_setup(dev); + err = flexcan_chip_start(dev); if (err) - goto out_free_irq; + goto out_can_rx_offload_del; - /* start chip and queuing */ - err = flexcan_chip_start(dev); + can_rx_offload_enable(&priv->offload); + + err = request_irq(dev->irq, flexcan_irq, IRQF_SHARED, dev->name, dev); if (err) - goto out_offload_del; + goto out_can_rx_offload_disable; flexcan_chip_interrupts_enable(dev); can_led_event(dev, CAN_LED_EVENT_OPEN); - can_rx_offload_enable(&priv->offload); netif_start_queue(dev); return 0; - out_offload_del: + out_can_rx_offload_disable: + can_rx_offload_disable(&priv->offload); + flexcan_chip_stop(dev); + out_can_rx_offload_del: can_rx_offload_del(&priv->offload); - out_free_irq: - free_irq(dev->irq, dev); out_transceiver_disable: flexcan_transceiver_disable(priv); out_close: -- 2.29.2
