From: Wu Bo <wubo.oduw@xxxxxxxxx> m_can_handle_state_change() is called with the new_state as an argument. In the switch statements for CAN_STATE_ERROR_ACTIVE, the comment and the following code indicate that a CAN_STATE_ERROR_WARNING is handled. This patch fixes this problem by changing the case to CAN_STATE_ERROR_WARNING. Signed-off-by: Wu Bo <wubo.oduw@xxxxxxxxx> Link: http://lore.kernel.org/r/20200129022330.21248-2-wubo.oduw@xxxxxxxxx Cc: Dan Murphy <dmurphy@xxxxxx> Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/m_can/m_can.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index 02c5795b7393..63887e23d89c 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -665,7 +665,7 @@ static int m_can_handle_state_change(struct net_device *dev, unsigned int ecr; switch (new_state) { - case CAN_STATE_ERROR_ACTIVE: + case CAN_STATE_ERROR_WARNING: /* error warning state */ cdev->can.can_stats.error_warning++; cdev->can.state = CAN_STATE_ERROR_WARNING; @@ -694,7 +694,7 @@ static int m_can_handle_state_change(struct net_device *dev, __m_can_get_berr_counter(dev, &bec); switch (new_state) { - case CAN_STATE_ERROR_ACTIVE: + case CAN_STATE_ERROR_WARNING: /* error warning state */ cf->can_id |= CAN_ERR_CRTL; cf->data[1] = (bec.txerr > bec.rxerr) ? -- 2.29.2
