Hello Jakub, hello David,
here's a pull request for net/master consisting of 15 patches for net/master.
Anant Thazhemadam contributed two patches for the AF_CAN that prevent potential
access of uninitialized member in can_rcv() and canfd_rcv().
The next patch is by Alejandro Concepcion Rodriguez and changes can_restart()
to use the correct function to push a skb into the networking stack from
process context.
Zhang Qilong's patch fixes a memory leak in the error path of the ti_hecc's
probe function.
A patch by me fixes mcba_usb_start_xmit() function in the mcba_usb driver, to
first fill the skb and then pass it to can_put_echo_skb().
Colin Ian King's patch fixes a potential integer overflow on shift in the
peak_usb driver.
The next two patches target the flexcan driver, a patch by me adds the missing
"req_bit" to the stop mode property comment (which was broken during net-next
for v5.10). Zhang Qilong's patch fixes the failure handling of
pm_runtime_get_sync().
The next seven patches target the m_can driver including the tcan4x5x spi
driver glue code. Enric Balletbo i Serra's patch for the tcan4x5x Kconfig fix
the REGMAP_SPI dependency handling. A patch by me for the tcan4x5x driver's
probe() function adds missing error handling to for devm_regmap_init(), and in
tcan4x5x_can_remove() the order of deregistration is fixed. Wu Bo's patch for
the m_can driver fixes the state change handling in
m_can_handle_state_change(). Two patches by Dan Murphy first introduce
m_can_class_free_dev() and then make use of it to fix the freeing of the can
device. A patch by Faiz Abbas add a missing shutdown of the CAN controller in
the m_can_stop() function.
regards,
Marc
---
The following changes since commit ceb736e1d45c253f5e86b185ca9b497cdd43063f:
ipv6: Fix error path to cancel the meseage (2020-11-13 18:20:00 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can.git tags/linux-can-fixes-for-5.10-20201114
for you to fetch changes up to 9a7e716d475eb29213117d2e501b841050c4b511:
can: m_can: m_can_stop(): set device to software init mode before closing (2020-11-14 18:21:51 +0100)
----------------------------------------------------------------
linux-can-fixes-for-5.10-20201114
----------------------------------------------------------------
Alejandro Concepcion Rodriguez (1):
can: dev: can_restart(): post buffer from the right context
Anant Thazhemadam (2):
can: af_can: prevent potential access of uninitialized member in can_rcv()
can: af_can: prevent potential access of uninitialized member in canfd_rcv()
Colin Ian King (1):
can: peak_usb: fix potential integer overflow on shift of a int
Dan Murphy (2):
can: m_can: m_can_class_free_dev(): introduce new function
can: m_can: Fix freeing of can device from peripherials
Enric Balletbo i Serra (1):
can: tcan4x5x: replace depends on REGMAP_SPI with depends on SPI
Faiz Abbas (1):
can: m_can: m_can_stop(): set device to software init mode before closing
Marc Kleine-Budde (4):
can: mcba_usb: mcba_usb_start_xmit(): first fill skb, then pass to can_put_echo_skb()
can: flexcan: flexcan_setup_stop_mode(): add missing "req_bit" to stop mode property comment
can: tcan4x5x: tcan4x5x_can_probe(): add missing error checking for devm_regmap_init()
can: tcan4x5x: tcan4x5x_can_remove(): fix order of deregistration
Wu Bo (1):
can: m_can: m_can_handle_state_change(): fix state change
Zhang Qilong (2):
can: ti_hecc: Fix memleak in ti_hecc_probe
can: flexcan: fix failure handling of pm_runtime_get_sync()
drivers/net/can/dev.c | 2 +-
drivers/net/can/flexcan.c | 10 +++++---
drivers/net/can/m_can/Kconfig | 3 ++-
drivers/net/can/m_can/m_can.c | 16 ++++++++----
drivers/net/can/m_can/m_can.h | 1 +
drivers/net/can/m_can/m_can_platform.c | 23 +++++++++++------
drivers/net/can/m_can/tcan4x5x.c | 32 ++++++++++++++++-------
drivers/net/can/ti_hecc.c | 13 ++++++----
drivers/net/can/usb/mcba_usb.c | 4 +--
drivers/net/can/usb/peak_usb/pcan_usb_core.c | 4 +--
net/can/af_can.c | 38 ++++++++++++++++++++--------
11 files changed, 100 insertions(+), 46 deletions(-)
