After double check with Layerscape CAN owner (Pankaj Bansal), confirm
that LX2160A indeed supports ECC feature, so correct the feature table.
For SoCs with ECC supported, even use FLEXCAN_QUIRK_DISABLE_MECR quirk to
disable non-correctable errors interrupt and freeze mode, had better use
FLEXCAN_QUIRK_SUPPORT_ECC quirk to initialize all memory.
Fixes: 2c19bb43e5572 ("can: flexcan: add lx2160ar1 support")
Cc: Pankaj Bansal <pankaj.bansal@xxxxxxx>
Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
---
drivers/net/can/flexcan.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index 586e1417a697..c2330eab3595 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -217,7 +217,7 @@
* MX8MP FlexCAN3 03.00.17.01 yes yes no yes yes yes
* VF610 FlexCAN3 ? no yes no yes yes? no
* LS1021A FlexCAN2 03.00.04.00 no yes no no yes no
- * LX2160A FlexCAN3 03.00.23.00 no yes no no yes yes
+ * LX2160A FlexCAN3 03.00.23.00 no yes no yes yes yes
*
* Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
*/
@@ -411,7 +411,8 @@ static const struct flexcan_devtype_data fsl_ls1021a_r2_devtype_data = {
static const struct flexcan_devtype_data fsl_lx2160a_r1_devtype_data = {
.quirks = FLEXCAN_QUIRK_DISABLE_RXFG | FLEXCAN_QUIRK_ENABLE_EACEN_RRS |
FLEXCAN_QUIRK_DISABLE_MECR | FLEXCAN_QUIRK_BROKEN_PERR_STATE |
- FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD,
+ FLEXCAN_QUIRK_USE_OFF_TIMESTAMP | FLEXCAN_QUIRK_SUPPORT_FD |
+ FLEXCAN_QUIRK_SUPPORT_ECC,
};
static const struct can_bittiming_const flexcan_bittiming_const = {
--
2.17.1
