Re: [PATCH] can-isotp: enable RX timeout handling in listen-only mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/19/20 2:02 PM, Oliver Hartkopp wrote:
> As reported by Thomas Wagner here
> https://github.com/hartkopp/can-isotp/issues/34
> the timeout handling for data frames is not enabled when the isotp socket
> is used in listen-only mode (sockopt CAN_ISOTP_LISTEN_MODE).
> This mode is enabled by the isotpsniffer application which therefore
> became inconsistend with the strict rx timeout rules when running the
> isotp protocol in the operational mode.
> 
> This patch fixes this inconsistency by moving the return condition for the
> listen-only mode behind the timeout handling code.
> 
> Reported-by: Thomas Wagner <thwa1@xxxxxx>
> Signed-off-by: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>

Applied to linux-can.

tnx,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde           |
Embedded Linux                   | https://www.pengutronix.de  |
Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |

Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux