RE: [PATCH 3/6] dt-bindings: can: flexcan: add fsl, can-index property to indicate a resource

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Marc,

> -----Original Message-----
> From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
> Sent: 2020年10月16日 14:20
> To: Joakim Zhang <qiangqing.zhang@xxxxxxx>; robh+dt@xxxxxxxxxx;
> shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx; Peng Fan <peng.fan@xxxxxxx>; Ying Liu
> <victor.liu@xxxxxxx>; netdev@xxxxxxxxxxxxxxx; Pankaj Bansal
> <pankaj.bansal@xxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx;
> linux-can@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>;
> kernel@xxxxxxxxxxxxxx
> Subject: Re: [PATCH 3/6] dt-bindings: can: flexcan: add fsl, can-index property
> to indicate a resource
> 
> On 10/16/20 3:43 PM, Joakim Zhang wrote:
> > For SoCs with SCU support, need setup stop mode via SCU firmware, so
> > this property can help indicate a resource.
> >
> > Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/net/can/fsl-flexcan.txt | 5 +++++
> >  1 file changed, 5 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> > b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> > index 6af67f5e581c..839c0c0064a2 100644
> > --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> > +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt
> > @@ -43,6 +43,10 @@ Optional properties:
> >  		  0: clock source 0 (oscillator clock)
> >  		  1: clock source 1 (peripheral clock)
> >
> > +- fsl,can-index: The index of CAN instance.
> > +                 For SoCs with SCU support, need setup stop mode via
> SCU firmware,
> > +                 so this property can help indicate a resource.
> 
> This property is not CAN specific. So the name could be more general.

How about "fsl,index"?

Best Regards,
Joakim Zhang
> > +
> >  - wakeup-source: enable CAN remote wakeup
> >
> >  Example:
> > @@ -54,4 +58,5 @@ Example:
> >  		interrupt-parent = <&mpic>;
> >  		clock-frequency = <200000000>; // filled in by bootloader
> >  		fsl,clk-source = /bits/ 8 <0>; // select clock source 0 for PE
> > +		fsl,can-index = /bits/ 8 <1>; // the second CAN instance
> >  	};
> >
> 
> Marc
> 
> --
> Pengutronix e.K.                 | Marc Kleine-Budde           |
> Embedded Linux                   | https://www.pengutronix.de  |
> Vertretung West/Dortmund         | Phone: +49-231-2826-924     |
> Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-5555 |





[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux