From: Thomas Kopp <thomas.kopp@xxxxxxxxxxxxx> The wildcard should be narrowed down to prevent existing and future devices that are not compatible from matching. It is very unlikely that incompatible devices will be released that do not match the wildcard. This is the documentation part of the commit. Discussion Reference: https://lore.kernel.org/r/CAMuHMdVkwGjr6dJuMyhQNqFoJqbh6Ec5V2b5LenCshwpM2SDsQ@xxxxxxxxxxxxxx Reported-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> Signed-off-by: Thomas Kopp <thomas.kopp@xxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20200930091423.755-2-thomas.kopp@xxxxxxxxxxxxx [mkl: rename file, too] Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- ...{microchip,mcp25xxfd.yaml => microchip,mcp251xfd.yaml} | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) rename Documentation/devicetree/bindings/net/can/{microchip,mcp25xxfd.yaml => microchip,mcp251xfd.yaml} (91%) diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml similarity index 91% rename from Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml rename to Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml index 5beb00a614bf..2a884c1fe0e0 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/net/can/microchip,mcp25xxfd.yaml# +$id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: @@ -18,7 +18,7 @@ properties: description: for MCP2517FD - const: microchip,mcp2518fd description: for MCP2518FD - - const: microchip,mcp25xxfd + - const: microchip,mcp251xfd description: to autodetect chip variant reg: @@ -38,7 +38,7 @@ properties: microchip,rx-int-gpios: description: - GPIO phandle of GPIO connected to to INT1 pin of the MCP25XXFD, which + GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which signals a pending RX interrupt. maxItems: 1 @@ -65,7 +65,7 @@ examples: #size-cells = <0>; can@0 { - compatible = "microchip,mcp25xxfd"; + compatible = "microchip,mcp251xfd"; reg = <0>; clocks = <&can0_osc>; pinctrl-names = "default"; -- 2.28.0
