In [1] Geert noted that the autodetect compatible for the mcp25xxfd driver, which is "microchip,mcp25xxfd" might be too generic and overlap with upcoming, but incompatible chips. As the driver is in net-next but not mainline yet, the risk of breaking DT compatibility is quite low, so this patch changes the compatible to "microchip,mcp251xfd" and renames the binding documentation accordingly. [1] http://lore.kernel.org/r/CAMuHMdVkwGjr6dJuMyhQNqFoJqbh6Ec5V2b5LenCshwpM2SDsQ@xxxxxxxxxxxxxx Fixes: 1b5a78e69c1f ("dt-binding: can: mcp25xxfd: document device tree bindings") Reported-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- ...{microchip,mcp25xxfd.yaml => microchip,mcp251xfd.yaml} | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) rename Documentation/devicetree/bindings/net/can/{microchip,mcp25xxfd.yaml => microchip,mcp251xfd.yaml} (91%) diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml similarity index 91% rename from Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml rename to Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml index 5beb00a614bf..2a884c1fe0e0 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp25xxfd.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/net/can/microchip,mcp25xxfd.yaml# +$id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: @@ -18,7 +18,7 @@ properties: description: for MCP2517FD - const: microchip,mcp2518fd description: for MCP2518FD - - const: microchip,mcp25xxfd + - const: microchip,mcp251xfd description: to autodetect chip variant reg: @@ -38,7 +38,7 @@ properties: microchip,rx-int-gpios: description: - GPIO phandle of GPIO connected to to INT1 pin of the MCP25XXFD, which + GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which signals a pending RX interrupt. maxItems: 1 @@ -65,7 +65,7 @@ examples: #size-cells = <0>; can@0 { - compatible = "microchip,mcp25xxfd"; + compatible = "microchip,mcp251xfd"; reg = <0>; clocks = <&can0_osc>; pinctrl-names = "default"; -- 2.28.0
