[PATCH 2/6] can: dev: add a helper function to get the correct length of Classical frames

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In classical CAN, the length of the data (i.e. CAN payload) is not
always equal to the DLC! If the frame is a Remote Transmission Request
(RTR), data length is always zero regardless of DLC value and else, if
the DLC is greater than 8, the length is 8. Contrary to common belief,
ISO 11898-1 Chapter 8.4.2.3 (DLC field) do allow DLCs greater than 8
for Classical Frames and specifies that those DLCs shall indicate that
the data field is 8 bytes long.

Above facts are widely unknown and so many developpers uses the "len"
field of "struct canfd_frame" to get the length of classical CAN
frames: this is incorrect!

This patch introduces function get_can_len() which can be used in
remediation. The function takes the SKB as an input in order to be
able to determine if the frame is classical or FD.

Signed-off-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
---
 include/linux/can/dev.h | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 5e3d45525bd3..72a8a60c0094 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -177,6 +177,29 @@ u8 can_dlc2len(u8 can_dlc);
 /* map the sanitized data length to an appropriate data length code */
 u8 can_len2dlc(u8 len);
 
+/*
+ * get_can_len(skb) - get the length of the CAN payload.
+ *
+ * In classical CAN, the length of the data (i.e. CAN payload) is not
+ * always equal to the DLC! If the frame is a Remote Transmission
+ * Request (RTR), data length is always zero regardless of DLC value
+ * and else, if the DLC is greater than 8, the length is 8. Contrary
+ * to common belief, ISO 11898-1 Chapter 8.4.2.3 (DLC field) do allow
+ * DLCs greater than 8 for Classical Frames and specifies that those
+ * DLCs shall indicate that the data field is 8 bytes long.
+ */
+static inline int get_can_len(struct sk_buff *skb)
+{
+	struct canfd_frame *cf = (struct canfd_frame *)skb->data;
+
+	if (can_is_canfd_skb(skb))
+		return min_t(__u8, cf->len, CANFD_MAX_DLEN);
+	else if (cf->can_id & CAN_RTR_FLAG)
+		return 0;
+	else
+		return min_t(__u8, cf->len, CAN_MAX_DLEN);
+}
+
 struct net_device *alloc_candev_mqs(int sizeof_priv, unsigned int echo_skb_max,
 				    unsigned int txqs, unsigned int rxqs);
 #define alloc_candev(sizeof_priv, echo_skb_max) \
-- 
2.26.2




[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux