[PATCH 17/20] can: flexcan: add CAN FD BRS support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Joakim Zhang <qiangqing.zhang@xxxxxxx>

This patch adds CAN FD BitRate Switch (BRS) support to driver.

Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
Link: https://lore.kernel.org/r/20190712075926.7357-5-qiangqing.zhang@xxxxxxx
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
 drivers/net/can/flexcan.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index e3ecce80eadb..fc0e9d5fd02b 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -723,9 +723,13 @@ static netdev_tx_t flexcan_start_xmit(struct sk_buff *skb, struct net_device *de
 	if (cfd->can_id & CAN_RTR_FLAG)
 		ctrl |= FLEXCAN_MB_CNT_RTR;
 
-	if (can_is_canfd_skb(skb))
+	if (can_is_canfd_skb(skb)) {
 		ctrl |= FLEXCAN_MB_CNT_EDL;
 
+		if (cfd->flags & CANFD_BRS)
+			ctrl |= FLEXCAN_MB_CNT_BRS;
+	}
+
 	for (i = 0; i < cfd->len; i += sizeof(u32)) {
 		data = be32_to_cpup((__be32 *)&cfd->data[i]);
 		priv->write(data, &priv->tx_mb->data[i / sizeof(u32)]);
@@ -956,6 +960,9 @@ static struct sk_buff *flexcan_mailbox_read(struct can_rx_offload *offload,
 
 	if (reg_ctrl & FLEXCAN_MB_CNT_EDL) {
 		cfd->len = can_dlc2len(get_canfd_dlc((reg_ctrl >> 16) & 0xf));
+
+		if (reg_ctrl & FLEXCAN_MB_CNT_BRS)
+			cfd->flags |= CANFD_BRS;
 	} else {
 		cfd->len = get_can_dlc((reg_ctrl >> 16) & 0xf);
 
-- 
2.28.0




[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux