This patch fixes spelling erros found by "codespell" in the drivers/net/can subtree. Link: https://lore.kernel.org/r/20200915223527.1417033-6-mkl@xxxxxxxxxxxxxx Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/at91_can.c | 8 ++++---- drivers/net/can/cc770/cc770.c | 2 +- drivers/net/can/cc770/cc770.h | 2 +- drivers/net/can/grcan.c | 2 +- drivers/net/can/m_can/Kconfig | 2 +- drivers/net/can/pch_can.c | 4 ++-- drivers/net/can/sja1000/peak_pci.c | 2 +- drivers/net/can/sja1000/peak_pcmcia.c | 2 +- drivers/net/can/softing/Kconfig | 4 ++-- drivers/net/can/softing/softing_fw.c | 8 ++++---- drivers/net/can/softing/softing_main.c | 8 ++++---- drivers/net/can/softing/softing_platform.h | 2 +- drivers/net/can/ti_hecc.c | 2 +- drivers/net/can/usb/Kconfig | 2 +- drivers/net/can/usb/gs_usb.c | 4 ++-- drivers/net/can/usb/mcba_usb.c | 2 +- drivers/net/can/usb/peak_usb/pcan_usb_fd.c | 4 ++-- drivers/net/can/usb/peak_usb/pcan_usb_pro.c | 2 +- drivers/net/can/usb/ucan.c | 4 ++-- drivers/net/can/usb/usb_8dev.c | 4 ++-- drivers/net/can/xilinx_can.c | 2 +- 21 files changed, 36 insertions(+), 36 deletions(-) diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c index 38e9f80ed1ef..c14de95d2ca7 100644 --- a/drivers/net/can/at91_can.c +++ b/drivers/net/can/at91_can.c @@ -643,7 +643,7 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb) * * The first message goes into mb nr. 1 and issues an interrupt. All * rx ints are disabled in the interrupt handler and a napi poll is - * scheduled. We read the mailbox, but do _not_ reenable the mb (to + * scheduled. We read the mailbox, but do _not_ re-enable the mb (to * receive another message). * * lower mbxs upper @@ -661,13 +661,13 @@ static void at91_read_msg(struct net_device *dev, unsigned int mb) * * The variable priv->rx_next points to the next mailbox to read a * message from. As long we're in the lower mailboxes we just read the - * mailbox but not reenable it. + * mailbox but not re-enable it. * - * With completion of the last of the lower mailboxes, we reenable the + * With completion of the last of the lower mailboxes, we re-enable the * whole first group, but continue to look for filled mailboxes in the * upper mailboxes. Imagine the second group like overflow mailboxes, * which takes CAN messages if the lower goup is full. While in the - * upper group we reenable the mailbox right after reading it. Giving + * upper group we re-enable the mailbox right after reading it. Giving * the chip more room to store messages. * * After finishing we look again in the lower group if we've still diff --git a/drivers/net/can/cc770/cc770.c b/drivers/net/can/cc770/cc770.c index 7cdc232cbfea..07e2b8df5153 100644 --- a/drivers/net/can/cc770/cc770.c +++ b/drivers/net/can/cc770/cc770.c @@ -538,7 +538,7 @@ static int cc770_err(struct net_device *dev, u8 status) priv->can.can_stats.error_warning++; } } else { - /* Back to error avtive */ + /* Back to error active */ cf->can_id |= CAN_ERR_PROT; cf->data[2] = CAN_ERR_PROT_ACTIVE; priv->can.state = CAN_STATE_ERROR_ACTIVE; diff --git a/drivers/net/can/cc770/cc770.h b/drivers/net/can/cc770/cc770.h index 948541491ab5..0628fd9e1980 100644 --- a/drivers/net/can/cc770/cc770.h +++ b/drivers/net/can/cc770/cc770.h @@ -184,7 +184,7 @@ struct cc770_priv { u8 control_normal_mode; /* Control register for normal mode */ u8 cpu_interface; /* CPU interface register */ u8 clkout; /* Clock out register */ - u8 bus_config; /* Bus conffiguration register */ + u8 bus_config; /* Bus configuration register */ struct sk_buff *tx_skb; }; diff --git a/drivers/net/can/grcan.c b/drivers/net/can/grcan.c index 5d1f15843181..39802f107eb1 100644 --- a/drivers/net/can/grcan.c +++ b/drivers/net/can/grcan.c @@ -1243,7 +1243,7 @@ static int grcan_poll(struct napi_struct *napi, int budget) int rx_budget = budget / 2; int tx_budget = budget - rx_budget; - /* Half of the budget for receiveing messages */ + /* Half of the budget for receiving messages */ rx_work_done = grcan_receive(dev, rx_budget); /* Half of the budget for transmitting messages as that can trigger echo diff --git a/drivers/net/can/m_can/Kconfig b/drivers/net/can/m_can/Kconfig index d9216147ca93..48be627c85c2 100644 --- a/drivers/net/can/m_can/Kconfig +++ b/drivers/net/can/m_can/Kconfig @@ -20,5 +20,5 @@ config CAN_M_CAN_TCAN4X5X tristate "TCAN4X5X M_CAN device" help Say Y here if you want support for Texas Instruments TCAN4x5x - M_CAN controller. This device is a peripherial device that uses the + M_CAN controller. This device is a peripheral device that uses the SPI bus for communication. diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c index db41dddd5771..af4fbd8f9077 100644 --- a/drivers/net/can/pch_can.c +++ b/drivers/net/can/pch_can.c @@ -461,7 +461,7 @@ static void pch_can_int_clr(struct pch_can_priv *priv, u32 mask) PCH_ID2_DIR | (0x7ff << 2)); iowrite32(0x0, &priv->regs->ifregs[1].id1); - /* Claring NewDat, TxRqst & IntPnd */ + /* Clearing NewDat, TxRqst & IntPnd */ pch_can_bit_clear(&priv->regs->ifregs[1].mcont, PCH_IF_MCONT_NEWDAT | PCH_IF_MCONT_INTPND | PCH_IF_MCONT_TXRQXT); @@ -834,7 +834,7 @@ static int pch_can_open(struct net_device *ndev) struct pch_can_priv *priv = netdev_priv(ndev); int retval; - /* Regstering the interrupt. */ + /* Registering the interrupt. */ retval = request_irq(priv->dev->irq, pch_can_interrupt, IRQF_SHARED, ndev->name, ndev); if (retval) { diff --git a/drivers/net/can/sja1000/peak_pci.c b/drivers/net/can/sja1000/peak_pci.c index 8c0244f51059..4713921bd511 100644 --- a/drivers/net/can/sja1000/peak_pci.c +++ b/drivers/net/can/sja1000/peak_pci.c @@ -97,7 +97,7 @@ MODULE_DEVICE_TABLE(pci, peak_pci_tbl); /* GPIOICR byte access offsets */ #define PITA_GPOUT 0x18 /* GPx output value */ #define PITA_GPIN 0x19 /* GPx input value */ -#define PITA_GPOEN 0x1A /* configure GPx as ouput pin */ +#define PITA_GPOEN 0x1A /* configure GPx as output pin */ /* I2C GP bits */ #define PITA_GPIN_SCL 0x01 /* Serial Clock Line */ diff --git a/drivers/net/can/sja1000/peak_pcmcia.c b/drivers/net/can/sja1000/peak_pcmcia.c index 5e0d5e8101c8..cf951a783078 100644 --- a/drivers/net/can/sja1000/peak_pcmcia.c +++ b/drivers/net/can/sja1000/peak_pcmcia.c @@ -671,7 +671,7 @@ static int pcan_probe(struct pcmcia_device *pdev) card->fw_major = pcan_read_reg(card, PCC_FW_MAJOR); card->fw_minor = pcan_read_reg(card, PCC_FW_MINOR); - /* display board name and firware version */ + /* display board name and firmware version */ dev_info(&pdev->dev, "PEAK-System pcmcia card %s fw %d.%d\n", pdev->prod_id[1] ? pdev->prod_id[1] : "PCAN-PC Card", card->fw_major, card->fw_minor); diff --git a/drivers/net/can/softing/Kconfig b/drivers/net/can/softing/Kconfig index 16b9eec63490..9edc73b13014 100644 --- a/drivers/net/can/softing/Kconfig +++ b/drivers/net/can/softing/Kconfig @@ -5,14 +5,14 @@ config CAN_SOFTING help Support for CAN cards from Softing Gmbh & some cards from Vector Gmbh. - Softing Gmbh CAN cards come with 1 or 2 physical busses. + Softing Gmbh CAN cards come with 1 or 2 physical buses. Those cards typically use Dual Port RAM to communicate with the host CPU. The interface is then identical for PCI and PCMCIA cards. This driver operates on a platform device, which has been created by softing_cs or softing_pci driver. Warning: The API of the card does not allow fine control per bus, but - controls the 2 busses on the card together. + controls the 2 buses on the card together. As such, some actions (start/stop/busoff recovery) on 1 bus must bring down the other bus too temporarily. diff --git a/drivers/net/can/softing/softing_fw.c b/drivers/net/can/softing/softing_fw.c index 8f44fdd8804b..ccd649a8e37b 100644 --- a/drivers/net/can/softing/softing_fw.c +++ b/drivers/net/can/softing/softing_fw.c @@ -273,7 +273,7 @@ int softing_load_app_fw(const char *file, struct softing *card) goto failed; } - /* regualar data */ + /* regular data */ for (sum = 0, j = 0; j < len; ++j) sum += dat[j]; /* work in 16bit (target) */ @@ -474,14 +474,14 @@ int softing_startstop(struct net_device *dev, int up) if (ret) goto failed; if (!bus_bitmask_start) - /* no busses to be brought up */ + /* no buses to be brought up */ goto card_done; if ((bus_bitmask_start & 1) && (bus_bitmask_start & 2) && (softing_error_reporting(card->net[0]) != softing_error_reporting(card->net[1]))) { dev_alert(&card->pdev->dev, - "err_reporting flag differs for busses\n"); + "err_reporting flag differs for buses\n"); goto invalid; } error_reporting = 0; @@ -635,7 +635,7 @@ int softing_startstop(struct net_device *dev, int up) priv->can.state = CAN_STATE_ERROR_ACTIVE; open_candev(netdev); if (dev != netdev) { - /* notify other busses on the restart */ + /* notify other buses on the restart */ softing_netdev_rx(netdev, &msg, 0); ++priv->can.can_stats.restarts; } diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c index d1ddf763b188..11b0f3bcfe80 100644 --- a/drivers/net/can/softing/softing_main.c +++ b/drivers/net/can/softing/softing_main.c @@ -170,8 +170,8 @@ static int softing_handle_1(struct softing *card) msg.can_dlc = CAN_ERR_DLC; msg.data[1] = CAN_ERR_CRTL_RX_OVERFLOW; /* - * service to all busses, we don't know which it was applicable - * but only service busses that are online + * service to all buses, we don't know which it was applicable + * but only service buses that are online */ for (j = 0; j < ARRAY_SIZE(card->net); ++j) { netdev = card->net[j]; @@ -339,7 +339,7 @@ static irqreturn_t softing_irq_thread(int irq, void *dev_id) continue; priv = netdev_priv(netdev); if (!canif_is_active(netdev)) - /* it makes no sense to wake dead busses */ + /* it makes no sense to wake dead buses */ continue; if (priv->tx.pending >= TX_ECHO_SKB_MAX) continue; @@ -374,7 +374,7 @@ static irqreturn_t softing_irq_v1(int irq, void *dev_id) } /* - * netdev/candev inter-operability + * netdev/candev interoperability */ static int softing_netdev_open(struct net_device *ndev) { diff --git a/drivers/net/can/softing/softing_platform.h b/drivers/net/can/softing/softing_platform.h index 68a161547644..cd8d7904c5f0 100644 --- a/drivers/net/can/softing/softing_platform.h +++ b/drivers/net/can/softing/softing_platform.h @@ -19,7 +19,7 @@ struct softing_platform_data { * 16bit, shared interrupt */ int generation; - int nbus; /* # busses on device */ + int nbus; /* # buses on device */ unsigned int freq; /* operating frequency in Hz */ unsigned int max_brp; unsigned int max_sjw; diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index 94b1491b569f..fc76f7ad735a 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -454,7 +454,7 @@ static int ti_hecc_get_berr_counter(const struct net_device *ndev, /* ti_hecc_xmit: HECC Transmit * * The transmit mailboxes start from 0 to HECC_MAX_TX_MBOX. In HECC the - * priority of the mailbox for tranmission is dependent upon priority setting + * priority of the mailbox for transmission is dependent upon priority setting * field in mailbox registers. The mailbox with highest value in priority field * is transmitted first. Only when two mailboxes have the same value in * priority field the highest numbered mailbox is transmitted first. diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig index 77fa830fe7dd..bcb331b0c958 100644 --- a/drivers/net/can/usb/Kconfig +++ b/drivers/net/can/usb/Kconfig @@ -90,7 +90,7 @@ config CAN_PEAK_USB tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD" help This driver supports the PEAK-System Technik USB adapters that enable - access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD + access to the CAN bus, with respect to the CAN 2.0b and/or CAN-FD standards, that is: PCAN-USB single CAN 2.0b channel USB adapter diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index a4b4b742c80c..3005157059ca 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -828,7 +828,7 @@ static struct gs_can *gs_make_candev(unsigned int channel, netdev->flags |= IFF_ECHO; /* we support full roundtrip echo */ - /* dev settup */ + /* dev setup */ strcpy(dev->bt_const.name, "gs_usb"); dev->bt_const.tseg1_min = bt_const->tseg1_min; dev->bt_const.tseg1_max = bt_const->tseg1_max; @@ -852,7 +852,7 @@ static struct gs_can *gs_make_candev(unsigned int channel, dev->tx_context[rc].echo_id = GS_MAX_TX_URBS; } - /* can settup */ + /* can setup */ dev->can.state = CAN_STATE_STOPPED; dev->can.clock.freq = bt_const->fclk_can; dev->can.bittiming_const = &dev->bt_const; diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c index 21faa2ec4632..eb6fb7435061 100644 --- a/drivers/net/can/usb/mcba_usb.c +++ b/drivers/net/can/usb/mcba_usb.c @@ -28,7 +28,7 @@ #define MCBA_CTX_FREE MCBA_MAX_TX_URBS /* RX buffer must be bigger than msg size since at the - * beggining USB messages are stacked. + * beginning USB messages are stacked. */ #define MCBA_USB_RX_BUFF_SIZE 64 #define MCBA_USB_TX_BUFF_SIZE (sizeof(struct mcba_usb_msg)) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c index 47cc1ff5b88e..ab63fd9eb982 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_fd.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_fd.c @@ -35,7 +35,7 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB Pro FD adapter"); #define PCAN_UFD_RX_BUFFER_SIZE 2048 #define PCAN_UFD_TX_BUFFER_SIZE 512 -/* read some versions info from the hw devcie */ +/* read some versions info from the hw device */ struct __packed pcan_ufd_fw_info { __le16 size_of; /* sizeof this */ __le16 type; /* type of this structure */ @@ -796,7 +796,7 @@ static int pcan_usb_fd_start(struct peak_usb_device *dev) return err; } -/* socket callback used to copy berr counters values receieved through USB */ +/* socket callback used to copy berr counters values received through USB */ static int pcan_usb_fd_get_berr_counter(const struct net_device *netdev, struct can_berr_counter *bec) { diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index 1689ab387612..f85b560e05db 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -973,7 +973,7 @@ int pcan_usb_pro_probe(struct usb_interface *intf) struct usb_endpoint_descriptor *ep = &if_desc->endpoint[i].desc; /* - * below is the list of valid ep addreses. Any other ep address + * below is the list of valid ep addresses. Any other ep address * is considered as not-CAN interface address => no dev created */ switch (ep->bEndpointAddress) { diff --git a/drivers/net/can/usb/ucan.c b/drivers/net/can/usb/ucan.c index 81e942f713e6..dc5290b36598 100644 --- a/drivers/net/can/usb/ucan.c +++ b/drivers/net/can/usb/ucan.c @@ -1445,7 +1445,7 @@ static int ucan_probe(struct usb_interface *intf, /* request the device information and store it in ctl_msg_buffer * - * note: ucan_ctrl_command_* wrappers connot be used yet + * note: ucan_ctrl_command_* wrappers cannot be used yet * because `up` is initialised in Stage 3 */ ret = usb_control_msg(udev, @@ -1494,7 +1494,7 @@ static int ucan_probe(struct usb_interface *intf, up = netdev_priv(netdev); - /* initialze data */ + /* initialize data */ up->udev = udev; up->intf = intf; up->netdev = netdev; diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c index 8fa224b28218..62749c67c959 100644 --- a/drivers/net/can/usb/usb_8dev.c +++ b/drivers/net/can/usb/usb_8dev.c @@ -88,7 +88,7 @@ enum usb_8dev_cmd { /* status */ #define USB_8DEV_STATUSMSG_OK 0x00 /* Normal condition. */ -#define USB_8DEV_STATUSMSG_OVERRUN 0x01 /* Overrun occured when sending */ +#define USB_8DEV_STATUSMSG_OVERRUN 0x01 /* Overrun occurred when sending */ #define USB_8DEV_STATUSMSG_BUSLIGHT 0x02 /* Error counter has reached 96 */ #define USB_8DEV_STATUSMSG_BUSHEAVY 0x03 /* Error count. has reached 128 */ #define USB_8DEV_STATUSMSG_BUSOFF 0x04 /* Device is in BUSOFF */ @@ -165,7 +165,7 @@ struct __packed usb_8dev_rx_msg { /* command frame */ struct __packed usb_8dev_cmd_msg { u8 begin; - u8 channel; /* unkown - always 0 */ + u8 channel; /* unknown - always 0 */ u8 command; /* command to execute */ u8 opt1; /* optional parameter / return value */ u8 opt2; /* optional parameter 2 */ diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index c1dbab8c896d..7ae268468d2c 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -1308,7 +1308,7 @@ static void xcan_tx_interrupt(struct net_device *ndev, u32 isr) /** * xcan_interrupt - CAN Isr * @irq: irq number - * @dev_id: device id poniter + * @dev_id: device id pointer * * This is the xilinx CAN Isr. It checks for the type of interrupt * and invokes the corresponding ISR. -- 2.28.0
