From: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx> This patch documents the functions and numbers of the commands sent by the driver to the PCAN-USB CAN device from PEAK-System GmbH. Signed-off-by: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20191206153803.17725-2-s.grosjean@xxxxxxxxxxxxxxx Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/usb/peak_usb/pcan_usb.c | 33 +++++++++++++++++++------ 1 file changed, 26 insertions(+), 7 deletions(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c index 66d0198e7834..76468250cabf 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb.c @@ -34,6 +34,22 @@ MODULE_SUPPORTED_DEVICE("PEAK-System PCAN-USB adapter"); #define PCAN_USB_CMD_LEN (PCAN_USB_CMD_ARGS + \ PCAN_USB_CMD_ARGS_LEN) +/* PCAN-USB commands */ +#define PCAN_USB_CMD_BITRATE 1 +#define PCAN_USB_CMD_SET_BUS 3 +#define PCAN_USB_CMD_DEVID 4 +#define PCAN_USB_CMD_SN 6 +#define PCAN_USB_CMD_REGISTER 9 +#define PCAN_USB_CMD_EXT_VCC 10 + +/* PCAN_USB_CMD_SET_BUS number arg */ +#define PCAN_USB_BUS_XCVER 2 +#define PCAN_USB_BUS_SILENT_MODE 3 + +/* PCAN_USB_CMD_xxx functions */ +#define PCAN_USB_GET 1 +#define PCAN_USB_SET 2 + /* PCAN-USB command timeout (ms.) */ #define PCAN_USB_COMMAND_TIMEOUT 1000 @@ -172,7 +188,8 @@ static int pcan_usb_set_sja1000(struct peak_usb_device *dev, u8 mode) [1] = mode, }; - return pcan_usb_send_cmd(dev, 9, 2, args); + return pcan_usb_send_cmd(dev, PCAN_USB_CMD_REGISTER, PCAN_USB_SET, + args); } static int pcan_usb_set_bus(struct peak_usb_device *dev, u8 onoff) @@ -181,7 +198,8 @@ static int pcan_usb_set_bus(struct peak_usb_device *dev, u8 onoff) [0] = !!onoff, }; - return pcan_usb_send_cmd(dev, 3, 2, args); + return pcan_usb_send_cmd(dev, PCAN_USB_CMD_SET_BUS, PCAN_USB_BUS_XCVER, + args); } static int pcan_usb_set_silent(struct peak_usb_device *dev, u8 onoff) @@ -190,7 +208,8 @@ static int pcan_usb_set_silent(struct peak_usb_device *dev, u8 onoff) [0] = !!onoff, }; - return pcan_usb_send_cmd(dev, 3, 3, args); + return pcan_usb_send_cmd(dev, PCAN_USB_CMD_SET_BUS, + PCAN_USB_BUS_SILENT_MODE, args); } static int pcan_usb_set_ext_vcc(struct peak_usb_device *dev, u8 onoff) @@ -199,7 +218,7 @@ static int pcan_usb_set_ext_vcc(struct peak_usb_device *dev, u8 onoff) [0] = !!onoff, }; - return pcan_usb_send_cmd(dev, 10, 2, args); + return pcan_usb_send_cmd(dev, PCAN_USB_CMD_EXT_VCC, PCAN_USB_SET, args); } /* @@ -223,7 +242,7 @@ static int pcan_usb_set_bittiming(struct peak_usb_device *dev, args[0] = btr1; args[1] = btr0; - return pcan_usb_send_cmd(dev, 1, 2, args); + return pcan_usb_send_cmd(dev, PCAN_USB_CMD_BITRATE, PCAN_USB_SET, args); } /* @@ -307,7 +326,7 @@ static int pcan_usb_get_serial(struct peak_usb_device *dev, u32 *serial_number) u8 args[PCAN_USB_CMD_ARGS_LEN]; int err; - err = pcan_usb_wait_rsp(dev, 6, 1, args); + err = pcan_usb_wait_rsp(dev, PCAN_USB_CMD_SN, PCAN_USB_GET, args); if (err) { netdev_err(dev->netdev, "getting serial failure: %d\n", err); } else if (serial_number) { @@ -328,7 +347,7 @@ static int pcan_usb_get_device_id(struct peak_usb_device *dev, u32 *device_id) u8 args[PCAN_USB_CMD_ARGS_LEN]; int err; - err = pcan_usb_wait_rsp(dev, 4, 1, args); + err = pcan_usb_wait_rsp(dev, PCAN_USB_CMD_DEVID, PCAN_USB_GET, args); if (err) netdev_err(dev->netdev, "getting device id failure: %d\n", err); else if (device_id) -- 2.28.0
