From: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx> Signed-off-by: Pavel Pisa <pisa@xxxxxxxxxxxxxxxx> --- .../devicetree/bindings/net/can/ctu,ctucanfd.txt | 61 ++++++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt new file mode 100644 index 000000000000..4cb2f04cb412 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.txt @@ -0,0 +1,61 @@ +Memory Mapped CTU CAN FD Open-source IP Core Device Tree Bindings +----------------------------------------------------------------- + + +The core sources and documentation on project page + + https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core + http://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/Progdokum.pdf + +Integration in Xilinx Zynq SoC based system together with +OpenCores SJA1000 compatible controllers + + https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top + +Martin Jerabek's dimploma thesis with integration and testing +framework description + + https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf + +Required properties: + +- compatible : should be one of "ctu,ctucanfd", "ctu,canfd-2". + The "canfd-2" has been reserved for older revision of the IP core. + The revision can be read from the IP core register as well. + +- reg = <(baseaddr) (size)> : specify mapping into physical address + space of the processor system. + +- interrupts : property with a value describing the interrupt source + required for the CTU CAN FD. For Zynq SoC system format is + <(is_spi) (number) (type)> where is_spi defines if it is SPI + (shared peripheral) interrupt, the second number is translated + to the vector by addition of 32 on Zynq-7000 systems and type + is IRQ_TYPE_LEVEL_HIGH (4) for Zynq. + +- clocks: phandle of reference clock (100 MHz is appropriate + for FPGA implementation on Zynq-7000 system). + +Optional properties: + +- clock-names: not used in actual design but if more clocks are used + by cores then "can_clk" would be clock source name for the clocks + used to define CAN time-quanta. + +Example when integrated to Zynq-7000 system DTS: + + / { + /* ... */ + amba: amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + ctu_can_fd_0: can@43c30000 { + compatible = "ctu,ctucanfd"; + interrupts = <0 30 4>; + clocks = <&clkc 15>; + reg = <0x43c30000 0x10000>; + }; + }; + }; -- 2.11.0
