[PATCH v4 2/2] can: tcan4x5x: put the device out of standby before register access

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The m_can tries to detect if Non ISO Operation is available while in
standby, this function results in the following error:

tcan4x5x spi2.0 (unnamed net_device) (uninitialized): Failed to init module
tcan4x5x spi2.0: m_can device registered (irq=84, version=32)
tcan4x5x spi2.0 can2: TCAN4X5X successfully initialized.

When the tcan device comes out of reset it comes out in standby mode.
The m_can driver tries to access the control register but fails due to
the device is in standby mode.

So this patch will put the tcan device in normal mode before the m_can
driver does the initialization.

Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
Changes since v3:
 - Fixed fixes tag

 drivers/net/can/m_can/tcan4x5x.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/can/m_can/tcan4x5x.c b/drivers/net/can/m_can/tcan4x5x.c
index 960a16aca7ca..32c16be5a9d8 100644
--- a/drivers/net/can/m_can/tcan4x5x.c
+++ b/drivers/net/can/m_can/tcan4x5x.c
@@ -475,6 +475,10 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
 	if (ret)
 		goto out_power;
 
+	ret = tcan4x5x_init(mcan_class);
+	if (ret)
+		goto out_power;
+
 	ret = m_can_class_register(mcan_class);
 	if (ret)
 		goto out_power;
-- 
2.24.0




[Index of Archives]     [Automotive Discussions]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux]     [Linux OMAP]     [Linux MIPS]     [eCos]     [Asterisk Internet PBX]     [Linux API]     [CAN Bus]

  Powered by Linux