The parse config function now performs action on the device either
reading or writing and a reset. If the regulator is managed it needs
to be turned on. So turn on the regulator if available if the parsing
fails then turn off the regulator.
Fixes: a5235f3c7c23 ("can: tcan45x: Make wake-up GPIO an optional GPIO")
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
drivers/net/can/m_can/tcan4x5x.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/m_can/tcan4x5x.c b/drivers/net/can/m_can/tcan4x5x.c
index 4e1789ea2bc3..515486fcb150 100644
--- a/drivers/net/can/m_can/tcan4x5x.c
+++ b/drivers/net/can/m_can/tcan4x5x.c
@@ -451,11 +451,11 @@ static int tcan4x5x_can_probe(struct spi_device *spi)
priv->regmap = devm_regmap_init(&spi->dev, &tcan4x5x_bus,
&spi->dev, &tcan4x5x_regmap);
+ tcan4x5x_power_enable(priv->power, 1);
+
ret = tcan4x5x_parse_config(mcan_class);
if (ret)
- goto out_clk;
-
- tcan4x5x_power_enable(priv->power, 1);
+ goto out_power;
ret = m_can_class_register(mcan_class);
if (ret)
--
2.23.0
