> -----Original Message-----
> From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
> Sent: 2019年12月4日 17:21
> To: Joakim Zhang <qiangqing.zhang@xxxxxxx>; sean@xxxxxxxxxx;
> linux-can@xxxxxxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>; netdev@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH V2 4/4] can: flexcan: add LPSR mode support
>
> On 11/27/19 6:56 AM, Joakim Zhang wrote:
> > For i.MX7D LPSR mode, the controller will lost power and got the
> > configuration state lost after system resume back. (coming i.MX8QM/QXP
> > will also completely power off the domain, the controller state will
> > be lost and needs restore).
> > So we need to set pinctrl state again and re-start chip to do
> > re-configuration after resume.
> >
> > For wakeup case, it should not set pinctrl to sleep state by
> > pinctrl_pm_select_sleep_state.
> > For interface is not up before suspend case, we don't need
> > re-configure as it will be configured by user later by interface up.
> >
> > Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> > ------
> > ChangeLog:
> > V1->V2: no change.
> > ---
> > drivers/net/can/flexcan.c | 21 ++++++++++++++-------
> > 1 file changed, 14 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
> > index d178146b3da5..d1509cffdd24 100644
> > --- a/drivers/net/can/flexcan.c
> > +++ b/drivers/net/can/flexcan.c
> > @@ -26,6 +26,7 @@
> > #include <linux/platform_device.h>
> > #include <linux/pm_runtime.h>
> > #include <linux/regulator/consumer.h>
> > +#include <linux/pinctrl/consumer.h>
> > #include <linux/regmap.h>
> >
> > #define DRV_NAME "flexcan"
> > @@ -1707,7 +1708,7 @@ static int __maybe_unused
> flexcan_suspend(struct
> > device *device) {
> > struct net_device *dev = dev_get_drvdata(device);
> > struct flexcan_priv *priv = netdev_priv(dev);
> > - int err = 0;
> > + int err;
> >
> > if (netif_running(dev)) {
> > /* if wakeup is enabled, enter stop mode @@ -1719,25 +1720,27
> @@
> > static int __maybe_unused flexcan_suspend(struct device *device)
> > if (err)
> > return err;
> > } else {
> > - err = flexcan_chip_disable(priv);
> > + flexcan_chip_stop(dev);
>
> chip_stop calls chip_disable, but doesn't propagate the error value.
> Please create a seperate patch to propagate the error value of chip_stop().
Okay, I will do it.
Best Regards,
Joakim Zhang
> Marc
>
> --
> Pengutronix e.K. | Marc Kleine-Budde |
> Embedded Linux | https://www.pengutronix.de |
> Vertretung West/Dortmund | Phone: +49-231-2826-924 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
