[PATCH 05/29] can: flexcan: disable completely the ECC mechanism

[Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>]

From: Joakim Zhang <qiangqing.zhang@xxxxxxx>

The ECC (memory error detection and correction) mechanism can be
activated or not, controlled by the ECCDIS bit in CAN_MECR. When
disabled, updates on indications and reporting registers are stopped.
So if want to disable ECC completely, had better assert ECCDIS bit, not
just mask the related interrupts.

Fixes: cdce844865be ("can: flexcan: add vf610 support for FlexCAN")
Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
Cc: linux-stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
---
 drivers/net/can/flexcan.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index dc5695dffc2e..1cd5179cb876 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -1188,6 +1188,7 @@ static int flexcan_chip_start(struct net_device *dev)
 		reg_mecr = priv->read(&regs->mecr);
 		reg_mecr &= ~FLEXCAN_MECR_ECRWRDIS;
 		priv->write(reg_mecr, &regs->mecr);
+		reg_mecr |= FLEXCAN_MECR_ECCDIS;
 		reg_mecr &= ~(FLEXCAN_MECR_NCEFAFRZ | FLEXCAN_MECR_HANCEI_MSK |
 			      FLEXCAN_MECR_FANCEI_MSK);
 		priv->write(reg_mecr, &regs->mecr);
-- 
2.23.0