This patch improves the sequence the resources are released by, first, - disabling the IRQ in the controller, then by - resetting the DMA logic, and finally, by - adding a read cycle to ensure that the above commands have been received before freeing the system interrupt. Signed-off-by: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx> --- drivers/net/can/peak_canfd/peak_pciefd_main.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/can/peak_canfd/peak_pciefd_main.c b/drivers/net/can/peak_canfd/peak_pciefd_main.c index f8b02fd99eb1..33c49c78a0e6 100644 --- a/drivers/net/can/peak_canfd/peak_pciefd_main.c +++ b/drivers/net/can/peak_canfd/peak_pciefd_main.c @@ -484,13 +484,16 @@ static int pciefd_post_cmd(struct peak_canfd_priv *ucan) /* controller now in reset mode: */ + /* disable IRQ for this CAN */ + pciefd_can_writereg(priv, CANFD_CTL_IEN_BIT, + PCIEFD_REG_CAN_RX_CTL_CLR); + /* stop and reset DMA addresses in Tx/Rx engines */ pciefd_can_clear_tx_dma(priv); pciefd_can_clear_rx_dma(priv); - /* disable IRQ for this CAN */ - pciefd_can_writereg(priv, CANFD_CTL_IEN_BIT, - PCIEFD_REG_CAN_RX_CTL_CLR); + /* wait for above commands to complete (read cycle) */ + (void)pciefd_sys_readreg(priv->board, PCIEFD_REG_SYS_VER1); free_irq(priv->ucan.ndev->irq, priv); -- 2.17.1 -- To unsubscribe from this list: send the line "unsubscribe linux-can" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
