On Mon, 2022-11-14 at 12:42 +0000, Benjamin Maynard wrote: > Thanks Dave for getting back to me so quickly. > > > Due to use of "drop_caches" this is almost certainly the known issue #1 > > I mentioned in the opening post of this series: > > https://lore.kernel.org/all/20221103161637.1725471-1-dwysocha@xxxxxxxxxx/ > > Apologies, I completely missed the known issues in the original > opening message of the series. Just to clarify, I was only ever > dropping the caches on the "NFS Client" in the below relationship: > > Source NFS Server <-- Re-Export Server (with FS-Cache) <-- NFS Client. > What sort of server is the Source NFS server here? If it's also Linux, then what sort of filesystem is being exported? > I never dropped the caches on the Re-Export Server (the server running > FS-Cache) at any point. > > However my rsize was lower than my readahead value. I've since corrected that: > > benmaynard@demo-cluster-1-26hm:~$ cat /proc/mounts | grep nfs > 10.0.0.49:/files /srv/nfs/files nfs > rw,noatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,acregmin=600,acregmax=600,acdirmin=600,acdirmax=600,hard,nocto,proto=tcp,nconnect=16,timeo=600,retrans=2,sec=sys,mountaddr=10.0.0.49,mountvers=3,mountport=37485,mountproto=tcp,fsc,local_lock=none,addr=10.0.0.49 > 0 0 > > benmaynard@demo-cluster-1-26hm:~$ findmnt -rnu -t nfs,nfs4 -o MAJ:MIN,TARGET > 0:52 /srv/nfs/files > benmaynard@demo-cluster-1-26hm:~$ cat /sys/class/bdi/0\:52/read_ahead_kb > 512 > > With this configuration I see the same issue, FS-Cache never reads > from /var/cache/fscache, and copying the same file always leads to > heavy writes to /var/cache/fscache (the cache is overwriting itself). > > I have also tried this copy without clearing the caches on any server > in the chain, and the same happens. > > Would you expect this behaviour even though rsize > read ahead? Would > you expect the referenced patch to fix this? > > I tried to apply the patch you suggested > (https://www.mail-archive.com/linux-cachefs@xxxxxxxxxx/msg03043.html) > but it did not apply cleanly, and I ran out of time to troubleshoot. I > should get some more time on Wednesday and I can re-try. > > > Kind Regards > Benjamin Maynard > > > Kind Regards > > Benjamin Maynard > > Customer Engineer > > benmaynard@xxxxxxxxxx > > Google, Inc. > > > > > On Mon, 14 Nov 2022 at 10:41, David Wysochanski <dwysocha@xxxxxxxxxx> wrote: > > > > Hi Ben, > > > > Thanks for testing these patches. More below. > > > > On Sat, Nov 12, 2022 at 7:47 AM Benjamin Maynard <benmaynard@xxxxxxxxxx> wrote: > > > > > > Hi all, > > > > > > I've been doing some more testing with these patches, I applied all of > > > the patches (v10 from > > > https://patchwork.kernel.org/project/linux-nfs/list/?series=691729) > > > apart from Patch 6 (the RFC patch) to version 6.0.8 of the kernel. > > > > > > I have the following setup: > > > > > > Source NFS Server <-- Re-Export Server (with FS-Cache) <-- NFS Client. > > > > > > I have a 500Gb file on the Source NFS Server, which I am then copying > > > to the NFS Client via the Re-Export Server. > > > > > > On the first copy, I see heavy writes to /var/cache/fscache on the > > > re-export server, and once the file copy completes I see that > > > /var/cache/fscache is approximately 500Gb in size. All good so far. > > > > > > I then deleted that file from the NFS Client, and dropped the caches > > > just to be safe (echo 3 > /proc/sys/vm/drop_caches on the NFS Client). > > > > > > I then performed another copy of the 500Gb file on the NFS Client, > > > again via the Re-Export Server. What I expected would happen is that I > > > would see heavy reads from the /var/cache/fscache volume as the file > > > should be served from FS-Cache. > > > > > > However what I actually saw was no reads whatsoever, FS-Cache seems to > > > be ignored and the file is pulled from the Source NFS Filer again. I > > > also see heavy writes to /var/cache/fscache, so it appears that > > > FS-Cache is overwriting its existing cache, and never using it. > > > > > Due to use of "drop_caches" this is almost certainly the known issue #1 > > I mentioned in the opening post of this series: > > https://lore.kernel.org/all/20221103161637.1725471-1-dwysocha@xxxxxxxxxx/ > > > > The above issue will be fixed with the following patch which has not > > been merged yet: > > https://www.mail-archive.com/linux-cachefs@xxxxxxxxxx/msg03043.html > > > > Do you have time to do another test to verify that is the case? > > If so, I can re-post that patch on top of the first 5 patches in this series, > > as well as a second patch that allows NFS to use it. > > > > > > > I only have 104Gb of memory on the Re-Export Server (with FS-Cache) so > > > it is not possible that the file is being served from the page cache. > > > > > > We saw this behaviour before on an older set of the patches when our > > > mount between the Re-Export Server and the Source NFS Filer was using > > > the "sync" option, but we are now using the "async" option and the > > > same is happening. > > > > > > Mount options: > > > > > > Source NFS Server <-- Re-Export Server (with FS-Cache): > > > > > > 10.0.0.49:/files /srv/nfs/files nfs > > > rw,noatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,acregmin=600,acregmax=600,acdirmin=600,acdirmax=600,hard,nocto,proto=tcp,nconnect=16,timeo=600,retrans=2,sec=sys,mountaddr=10.0.0.49,mountvers=3,mountport=37485,mountproto=tcp,fsc,local_lock=none,addr=10.0.0.49 > > > > > > Re-Export Server (with FS-Cache) <-- NFS Client: > > > > > > 10.0.0.3:/files /mnt/nfs nfs > > > rw,relatime,vers=3,rsize=1048576,wsize=1048576,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=10.0.0.3,mountvers=3,mountport=20048,mountproto=tcp,local_lock=none,addr=10.0.0.3 > > > > > > It is also worth noting this behaviour is not unique to the re-export > > > use case. I see FS-Cache not being used with the following setup: > > > > > > Source NFS Server <-- Client (with FS-Cache). > > > > > > Thanks, > > > Ben > > > > > > > > > Kind Regards > > > > > > Benjamin Maynard > > > > > > Customer Engineer > > > > > > benmaynard@xxxxxxxxxx > > > > > > Google, Inc. > > > > > > > > > > > > > > > On Mon, 31 Oct 2022 at 22:22, Trond Myklebust <trondmy@xxxxxxxxxxxxxxx> wrote: > > > > > > > > > > > > > > > > > On Oct 30, 2022, at 19:25, David Wysochanski <dwysocha@xxxxxxxxxx> wrote: > > > > > > > > > > On Sat, Oct 29, 2022 at 12:46 PM David Wysochanski <dwysocha@xxxxxxxxxx> wrote: > > > > > > > > > > > > On Fri, Oct 28, 2022 at 12:59 PM Trond Myklebust <trondmy@xxxxxxxxxx> wrote: > > > > > > > > > > > > > > On Fri, 2022-10-28 at 07:50 -0400, David Wysochanski wrote: > > > > > > > > On Thu, Oct 27, 2022 at 3:16 PM Trond Myklebust <trondmy@xxxxxxxxxx> > > > > > > > > wrote: > > > > > > > > > > > > > > > > > > On Mon, 2022-10-17 at 06:52 -0400, Dave Wysochanski wrote: > > > > > > > > > > Convert the NFS buffered read code paths to corresponding netfs > > > > > > > > > > APIs, > > > > > > > > > > but only when fscache is configured and enabled. > > > > > > > > > > > > > > > > > > > > The netfs API defines struct netfs_request_ops which must be > > > > > > > > > > filled > > > > > > > > > > in by the network filesystem. For NFS, we only need to define 5 > > > > > > > > > > of > > > > > > > > > > the functions, the main one being the issue_read() function. > > > > > > > > > > The issue_read() function is called by the netfs layer when a > > > > > > > > > > read > > > > > > > > > > cannot be fulfilled locally, and must be sent to the server > > > > > > > > > > (either > > > > > > > > > > the cache is not active, or it is active but the data is not > > > > > > > > > > available). > > > > > > > > > > Once the read from the server is complete, netfs requires a call > > > > > > > > > > to > > > > > > > > > > netfs_subreq_terminated() which conveys either how many bytes > > > > > > > > > > were > > > > > > > > > > read > > > > > > > > > > successfully, or an error. Note that issue_read() is called with > > > > > > > > > > a > > > > > > > > > > structure, netfs_io_subrequest, which defines the IO requested, > > > > > > > > > > and > > > > > > > > > > contains a start and a length (both in bytes), and assumes the > > > > > > > > > > underlying > > > > > > > > > > netfs will return a either an error on the whole region, or the > > > > > > > > > > number > > > > > > > > > > of bytes successfully read. > > > > > > > > > > > > > > > > > > > > The NFS IO path is page based and the main APIs are the pgio APIs > > > > > > > > > > defined > > > > > > > > > > in pagelist.c. For the pgio APIs, there is no way for the caller > > > > > > > > > > to > > > > > > > > > > know how many RPCs will be sent and how the pages will be broken > > > > > > > > > > up > > > > > > > > > > into underlying RPCs, each of which will have their own > > > > > > > > > > completion > > > > > > > > > > and > > > > > > > > > > return code. In contrast, netfs is subrequest based, a single > > > > > > > > > > subrequest may contain multiple pages, and a single subrequest is > > > > > > > > > > initiated with issue_read() and terminated with > > > > > > > > > > netfs_subreq_terminated(). > > > > > > > > > > Thus, to utilze the netfs APIs, NFS needs some way to accommodate > > > > > > > > > > the netfs API requirement on the single response to the whole > > > > > > > > > > subrequest, while also minimizing disruptive changes to the NFS > > > > > > > > > > pgio layer. > > > > > > > > > > > > > > > > > > > > The approach taken with this patch is to allocate a small > > > > > > > > > > structure > > > > > > > > > > for each nfs_netfs_issue_read() call, store the final error and > > > > > > > > > > number > > > > > > > > > > of bytes successfully transferred in the structure, and update > > > > > > > > > > these > > > > > > > > > > values > > > > > > > > > > as each RPC completes. The refcount on the structure is used as > > > > > > > > > > a > > > > > > > > > > marker > > > > > > > > > > for the last RPC completion, is incremented in > > > > > > > > > > nfs_netfs_read_initiate(), > > > > > > > > > > and decremented inside nfs_netfs_read_completion(), when a > > > > > > > > > > nfs_pgio_header > > > > > > > > > > contains a valid pointer to the data. On the final put (which > > > > > > > > > > signals > > > > > > > > > > the final outstanding RPC is complete) in > > > > > > > > > > nfs_netfs_read_completion(), > > > > > > > > > > call netfs_subreq_terminated() with either the final error value > > > > > > > > > > (if > > > > > > > > > > one or more READs complete with an error) or the number of bytes > > > > > > > > > > successfully transferred (if all RPCs complete successfully). > > > > > > > > > > Note > > > > > > > > > > that when all RPCs complete successfully, the number of bytes > > > > > > > > > > transferred > > > > > > > > > > is capped to the length of the subrequest. Capping the > > > > > > > > > > transferred > > > > > > > > > > length > > > > > > > > > > to the subrequest length prevents "Subreq overread" warnings from > > > > > > > > > > netfs. > > > > > > > > > > This is due to the "aligned_len" in nfs_pageio_add_page(), and > > > > > > > > > > the > > > > > > > > > > corner case where NFS requests a full page at the end of the > > > > > > > > > > file, > > > > > > > > > > even when i_size reflects only a partial page (NFS overread). > > > > > > > > > > > > > > > > > > > > Signed-off-by: Dave Wysochanski <dwysocha@xxxxxxxxxx> > > > > > > > > > > Reviewed-by: Jeff Layton <jlayton@xxxxxxxxxx> > > > > > > > > > > > > > > > > > > > > > > > > > > > This is not doing what I asked for, which was to separate out the > > > > > > > > > fscache functionality, so that we can call that if and when it is > > > > > > > > > available. > > > > > > > > > > > > > > > > > I must have misunderstood then. > > > > > > > > > > > > > > > > The last feedback I have from you was that you wanted it to be > > > > > > > > an opt-in feature, and it was a comment on a previous patch > > > > > > > > to Kconfig. I was proceeding the best I knew how, but > > > > > > > > let me try to get back on track. > > > > > > > > > > > > > > > > > Instead, it is just wrapping the NFS requests inside netfs > > > > > > > > > requests. As > > > > > > > > > it stands, that means it is just duplicating information, and > > > > > > > > > adding > > > > > > > > > unnecessary overhead to the standard I/O path (extra allocations, > > > > > > > > > extra > > > > > > > > > indirect calls, and extra bloat to the inode). > > > > > > > > > > > > > > > > > I think I understand what you're saying but I'm not sure. Let me > > > > > > > > ask some clarifying questions. > > > > > > > > > > > > > > > > Are you objecting to the code when CONFIG_NFS_FSCACHE is > > > > > > > > configured? Or when it is not? Or both? I think you're objecting > > > > > > > > when it's configured, but not enabled (we mount without 'fsc'). > > > > > > > > Am I right? > > > > > > > > > > > > > > > > Also, are you objecting to the design that to use fcache we now > > > > > > > > have to use netfs, specifically: > > > > > > > > - call into netfs via either netfs_read_folio or netfs_readahead > > > > > > > > - if fscache is enabled, then the IO can be satisfied from fscache > > > > > > > > - if fscache is not enabled, or some of the IO cannot be satisfied > > > > > > > > from the cache, then NFS is called back via netfs_issue_read > > > > > > > > and we use the normal NFS read pageio interface. This requires > > > > > > > > we call netfs_subreq_terminated() when all the RPCs complete, > > > > > > > > which is the reason for the small changes to pagelist.c > > > > > > > > > > > > > > I'm objecting to any middle layer "solution" that adds overhead to the > > > > > > > NFS I/O paths. > > > > > > > > > > > > > Got it. > > > > > > > > > > > > > I'm willing to consider solutions that are specific only to the fscache > > > > > > > use case (i.e. when the 'fsc' mount option is specified). However when > > > > > > > I perform a normal NFS mount, and do I/O, then I don't want to see > > > > > > > extra memory allocations, extra indirect calls and larger inode > > > > > > > footprints. > > > > > > > > > > > > > > IOW: I want the code to optimise for the case of standard NFS, not for > > > > > > > the case of 'NFS with cachefs additions'. > > > > > > > > > > > > > I agree completely. Are you seeing extra memory allocations > > > > > > happen on mounts without 'fsc' or is it more a concern or how > > > > > > some of the patches look? We should not be calling any netfs or > > > > > > fscache code if 'fsc' is not on the mount and I don't see any in my > > > > > > testing. So either there's a misunderstanding here, or there's a > > > > > > bug I'm missing. > > > > > > > > > > > > If fscache is not configured, then nfs_netfs_read_folio() and > > > > > > nfs_netfs_readahead() is a wrapper that returns -ENOBUFS. > > > > > > If it's configured but not enabled, then the checks for > > > > > > netfs_inode(inode)->cache should skip over any netfs code. > > > > > > But maybe there's a non-obvious bug you're seeing and > > > > > > somehow netfs is still getting called? Because I cannot > > > > > > see netfs getting called if 'fsc' is not on the mount in my > > > > > > tests. > > > > > > > > > > > > int nfs_netfs_read_folio(struct file *file, struct folio *folio) > > > > > > { > > > > > > if (!netfs_inode(folio_inode(folio))->cache) > > > > > > return -ENOBUFS; > > > > > > > > > > > > return netfs_read_folio(file, folio); > > > > > > } > > > > > > > > > > > > int nfs_netfs_readahead(struct readahead_control *ractl) > > > > > > { > > > > > > struct inode *inode = ractl->mapping->host; > > > > > > > > > > > > if (!netfs_inode(inode)->cache) > > > > > > return -ENOBUFS; > > > > > > > > > > > > netfs_readahead(ractl); > > > > > > return 0; > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > Can you be more specific as to the portions of the patch you don't > > > > > > > > like > > > > > > > > so I can move it in the right direction? > > > > > > > > > > > > > > > > This is from patch #2 which you didn't comment on. I'm not sure > > > > > > > > you're > > > > > > > > ok with it though, since you mention "extra bloat to the inode". > > > > > > > > Do you object to this even though it's wrapped in an > > > > > > > > #ifdef CONFIG_NFS_FSCACHE? If so, do you require no > > > > > > > > extra size be added to nfs_inode? > > > > > > > > > > > > > > > > @@ -204,9 +208,11 @@ struct nfs_inode { > > > > > > > > __u64 write_io; > > > > > > > > __u64 read_io; > > > > > > > > #ifdef CONFIG_NFS_FSCACHE > > > > > > > > - struct fscache_cookie *fscache; > > > > > > > > -#endif > > > > > > > > + struct netfs_inode netfs; /* netfs context and VFS inode > > > > > > > > */ > > > > > > > > +#else > > > > > > > > struct inode vfs_inode; > > > > > > > > +#endif > > > > > > > > + > > > > > > > > > > > > > > Ideally, I'd prefer no extra size. I can live with it up to a certain > > > > > > > point, however for now NFS is not unconditionally opting into the netfs > > > > > > > project. If we're to ever do that, then I want to see streamlined code > > > > > > > for the standard I/O case. > > > > > > > > > > > > > Ok and understood about standard I/O case. > > > > > > > > > > > > I was thinking how we might not increase the size, but I don't think > > > > > > I can make it work. > > > > > > > > > > > > I thought we could change to something like the below, without an > > > > > > embedded struct inode: > > > > > > > > > > > > @@ -204,9 +208,11 @@ struct nfs_inode { > > > > > > __u64 write_io; > > > > > > __u64 read_io; > > > > > > #ifdef CONFIG_NFS_FSCACHE > > > > > > - struct fscache_cookie *fscache; > > > > > > -#endif > > > > > > + struct netfs_inode *netfs; /* netfs context and VFS inode */ > > > > > > +#else > > > > > > struct inode vfs_inode; > > > > > > +#endif > > > > > > + > > > > > > > > > > > > Then I would need to alloc/free a netfs_inode at the time of > > > > > > nfs_inode initiation. Unfortunately this has the issue that the NFS_I() > > > > > > macro cannot work, because it requires an embedded "struct inode" > > > > > > due to "container_of" use: > > > > > > > > > > > > +#ifdef CONFIG_NFS_FSCACHE > > > > > > +static inline struct inode *VFS_I(struct nfs_inode *nfsi) > > > > > > +{ > > > > > > + return &nfsi->netfs.inode; > > > > > > +} > > > > > > +static inline struct nfs_inode *NFS_I(const struct inode *inode) > > > > > > +{ > > > > > > + return container_of(inode, struct nfs_inode, netfs.inode); > > > > > > +} > > > > > > +#else > > > > > > +static inline struct inode *VFS_I(struct nfs_inode *nfsi) > > > > > > +{ > > > > > > + return &nfsi->vfs_inode; > > > > > > +} > > > > > > static inline struct nfs_inode *NFS_I(const struct inode *inode) > > > > > > { > > > > > > return container_of(inode, struct nfs_inode, vfs_inode); > > > > > > } > > > > > > +#endif > > > > > > > > > > > > > > > > > > > > > > Actually Trond maybe we can achieve a "0 length increase" of > > > > > nfs_inode if dhowells would take a patch to modify the definition > > > > > of struct netfs_inode and netfs_inode_init(), something like the WIP > > > > > patch below. What do you think? > > > > > > > > That works for me. > > > > > > > > > > > > > > I think maybe this could be a follow-on patch and if you/dhowells > > > > > think it's an ok idea I can try to work out what is needed across > > > > > the tree. I thought about it more and I kinda agree that in the > > > > > case for NFS where fscache is "configured but not enabled", > > > > > then even though we're only adding 24 bytes to the nfs_inode > > > > > each time, it will add up so it is worth at least a discussion. > > > > > > > > > > diff --git a/include/linux/netfs.h b/include/linux/netfs.h > > > > > index f2402ddeafbf..195714f1c355 100644 > > > > > --- a/include/linux/netfs.h > > > > > +++ b/include/linux/netfs.h > > > > > @@ -118,11 +118,7 @@ enum netfs_io_source { > > > > > typedef void (*netfs_io_terminated_t)(void *priv, ssize_t transferred_or_error, > > > > > bool was_async); > > > > > > > > > > -/* > > > > > - * Per-inode context. This wraps the VFS inode. > > > > > - */ > > > > > -struct netfs_inode { > > > > > - struct inode inode; /* The VFS inode */ > > > > > +struct netfs_info { > > > > > const struct netfs_request_ops *ops; > > > > > #if IS_ENABLED(CONFIG_FSCACHE) > > > > > struct fscache_cookie *cache; > > > > > @@ -130,6 +126,14 @@ struct netfs_inode { > > > > > loff_t remote_i_size; /* Size of the remote file */ > > > > > }; > > > > > > > > > > +/* > > > > > + * Per-inode context. This wraps the VFS inode. > > > > > + */ > > > > > +struct netfs_inode { > > > > > + struct inode inode; /* The VFS inode */ > > > > > + struct netfs_info *netfs; /* Rest of netfs data */ > > > > > +}; > > > > > + > > > > > /* > > > > > * Resources required to do operations on a cache. > > > > > */ > > > > > @@ -312,10 +316,12 @@ static inline struct netfs_inode > > > > > *netfs_inode(struct inode *inode) > > > > > static inline void netfs_inode_init(struct netfs_inode *ctx, > > > > > const struct netfs_request_ops *ops) > > > > > { > > > > > - ctx->ops = ops; > > > > > - ctx->remote_i_size = i_size_read(&ctx->inode); > > > > > + ctx->netfs = kzalloc(sizeof(struct netfs_info)), GFP_KERNEL); > > > > > + /* FIXME: Check for NULL */ > > > > > + ctx->netfs->ops = ops; > > > > > + ctx->netfs->remote_i_size = i_size_read(&ctx->inode); > > > > > #if IS_ENABLED(CONFIG_FSCACHE) > > > > > - ctx->cache = NULL; > > > > > + ctx->netfs->cache = NULL; > > > > > #endif > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Are you ok with the stub functions which are placed in fscache.h, and > > > > > > > > when CONFIG_NFS_FSCACHE is not set, become either a no-op > > > > > > > > or a 1-liner (nfs_netfs_readpage_release)? > > > > > > > > > > > > > > > > #else /* CONFIG_NFS_FSCACHE */ > > > > > > > > +static inline void nfs_netfs_inode_init(struct nfs_inode *nfsi) {} > > > > > > > > +static inline void nfs_netfs_initiate_read(struct nfs_pgio_header > > > > > > > > *hdr) {} > > > > > > > > +static inline void nfs_netfs_read_completion(struct nfs_pgio_header > > > > > > > > *hdr) {} > > > > > > > > +static inline void nfs_netfs_readpage_release(struct nfs_page *req) > > > > > > > > +{ > > > > > > > > + unlock_page(req->wb_page); > > > > > > > > +} > > > > > > > > static inline void nfs_fscache_release_super_cookie(struct > > > > > > > > super_block *sb) {} > > > > > > > > static inline void nfs_fscache_init_inode(struct inode *inode) {} > > > > > > > > > > > > > > > > > > > > > > > > Do you object to the below? If so, then do you want > > > > > > > > #ifdef CONFIG_NFS_FSCACHE here? > > > > > > > > > > > > > > > > -- a/fs/nfs/inode.c > > > > > > > > +++ b/fs/nfs/inode.c > > > > > > > > @@ -2249,6 +2249,8 @@ struct inode *nfs_alloc_inode(struct > > > > > > > > super_block *sb) > > > > > > > > #ifdef CONFIG_NFS_V4_2 > > > > > > > > nfsi->xattr_cache = NULL; > > > > > > > > #endif > > > > > > > > + nfs_netfs_inode_init(nfsi); > > > > > > > > + > > > > > > > > return VFS_I(nfsi); > > > > > > > > } > > > > > > > > EXPORT_SYMBOL_GPL(nfs_alloc_i > > > > > > > > node); > > > > > > > > > > > > > > > > > > > > > > > > Do you object to the changes in fs/nfs/read.c? Specifically, > > > > > > > > how about the below calls to netfs from nfs_read_folio and > > > > > > > > nfs_readahead into equivalent netfs calls? So when > > > > > > > > NFS_CONFIG_FSCACHE is set, but fscache is not enabled > > > > > > > > ('fsc' not on mount), these netfs functions do immediately call > > > > > > > > netfs_alloc_request(). But I wonder if we could simply add a > > > > > > > > check to see if fscache is enabled on the mount, and skip > > > > > > > > over to satisfy what you want. Am I understanding what you > > > > > > > > want? > > > > > > > > > > > > > > Quite frankly, I'd prefer that we just split out the functionality that > > > > > > > is needed from the netfs code so that it can be optimised. However I'm > > > > > > > not interested enough in the cachefs functionality to work on that > > > > > > > myself. ...and as I indicated above, I might be OK with opting into the > > > > > > > netfs project, once the overhead can be made to disappear. > > > > > > > > > > > > > Understood. > > > > > > > > > > > > If you think it makes more sense, I can move some of the nfs_netfs_* > > > > > > functions into a netfs.c file as a starting point. Or that can maybe > > > > > > be done in a future patchset? > > > > > > > > > > > > For now I was equating netfs and fscache together so we can > > > > > > move on from the much older and single-page limiting fscache > > > > > > interface that is likely to go away soon. > > > > > > > > > > > > > > > > > > > > > > @@ -355,6 +343,10 @@ int nfs_read_folio(struct file *file, struct > > > > > > > > folio *folio) > > > > > > > > if (NFS_STALE(inode)) > > > > > > > > goto out_unlock; > > > > > > > > > > > > > > > > + ret = nfs_netfs_read_folio(file, folio); > > > > > > > > + if (!ret) > > > > > > > > + goto out; > > > > > > > > + > > > > > > > > > > > > > > > > @@ -405,6 +399,10 @@ void nfs_readahead(struct readahead_control > > > > > > > > *ractl) > > > > > > > > if (NFS_STALE(inode)) > > > > > > > > goto out; > > > > > > > > > > > > > > > > + ret = nfs_netfs_readahead(ractl); > > > > > > > > + if (!ret) > > > > > > > > + goto out; > > > > > > > > + > > > > > > > > > > > > > > The above wrappers should prevent any additional overhead when fscache > > > > > > is not enabled. As far as I know these work to avoid calling netfs > > > > > > when 'fsc' is not on the mount. > > > > > > > > > > > > > > > > > > > > > > And how about these calls from different points in the read > > > > > > > > path to the earlier mentioned stub functions? > > > > > > > > > > > > > > > > @@ -110,20 +110,13 @@ EXPORT_SYMBOL_GPL(nfs_pageio_reset_read_mds); > > > > > > > > > > > > > > > > static void nfs_readpage_release(struct nfs_page *req, int error) > > > > > > > > { > > > > > > > > - struct inode *inode = d_inode(nfs_req_openctx(req)->dentry); > > > > > > > > struct page *page = req->wb_page; > > > > > > > > > > > > > > > > - dprintk("NFS: read done (%s/%llu %d@%lld)\n", inode->i_sb- > > > > > > > > > s_id, > > > > > > > > - (unsigned long long)NFS_FILEID(inode), req->wb_bytes, > > > > > > > > - (long long)req_offset(req)); > > > > > > > > - > > > > > > > > if (nfs_error_is_fatal_on_server(error) && error != - > > > > > > > > ETIMEDOUT) > > > > > > > > SetPageError(page); > > > > > > > > - if (nfs_page_group_sync_on_bit(req, PG_UNLOCKPAGE)) { > > > > > > > > - if (PageUptodate(page)) > > > > > > > > - nfs_fscache_write_page(inode, page); > > > > > > > > - unlock_page(page); > > > > > > > > - } > > > > > > > > + if (nfs_page_group_sync_on_bit(req, PG_UNLOCKPAGE)) > > > > > > > > + nfs_netfs_readpage_release(req); > > > > > > > > + > > > > > > > > > > > > > > I'm not seeing the value of wrapping unlock_page(), no... That code is > > > > > > > going to need to change when we move it to use folios natively anyway. > > > > > > > > > > > > > Ok, how about I make it conditional on whether fscache is configured > > > > > > and enabled then, similar to the nfs_netfs_read_folio() and > > > > > > nfs_netfs_readahead()? Below is what that would look like. > > > > > > I could inline the code in nfs_netfs_readpage_release() if you > > > > > > think it would be clearer. > > > > > > > > > > > > static void nfs_readpage_release(struct nfs_page *req, int error) > > > > > > { > > > > > > struct page *page = req->wb_page; > > > > > > > > > > > > if (nfs_error_is_fatal_on_server(error) && error != -ETIMEDOUT) > > > > > > SetPageError(page); > > > > > > if (nfs_page_group_sync_on_bit(req, PG_UNLOCKPAGE)) > > > > > > #ifndef CONFIG_NFS_FSCACHE > > > > > > unlock_page(req->wb_page); > > > > > > #else > > > > > > nfs_netfs_readpage_release(req); > > > > > > #endif > > > > > > nfs_release_request(req); > > > > > > } > > > > > > > > > > > > > > > > > > void nfs_netfs_readpage_release(struct nfs_page *req) > > > > > > { > > > > > > struct inode *inode = d_inode(nfs_req_openctx(req)->dentry); > > > > > > > > > > > > /* > > > > > > * If fscache is enabled, netfs will unlock pages. > > > > > > */ > > > > > > if (netfs_inode(inode)->cache) > > > > > > return; > > > > > > > > > > > > unlock_page(req->wb_page); > > > > > > } > > > > > > > > > > > > > > > > > > > > nfs_release_request(req); > > > > > > > > } > > > > > > > > > > > > > > > > @@ -177,6 +170,8 @@ static void nfs_read_completion(struct > > > > > > > > nfs_pgio_header *hdr) > > > > > > > > nfs_list_remove_request(req); > > > > > > > > nfs_readpage_release(req, error); > > > > > > > > } > > > > > > > > + nfs_netfs_read_completion(hdr); > > > > > > > > + > > > > > > > > out: > > > > > > > > hdr->release(hdr); > > > > > > > > } > > > > > > > > @@ -187,6 +182,7 @@ static void nfs_initiate_read(struct > > > > > > > > nfs_pgio_header *hdr, > > > > > > > > struct rpc_task_setup *task_setup_data, > > > > > > > > int how) > > > > > > > > { > > > > > > > > rpc_ops->read_setup(hdr, msg); > > > > > > > > + nfs_netfs_initiate_read(hdr); > > > > > > > > trace_nfs_initiate_read(hdr); > > > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > Are you ok with these additions? Something like this would > > > > > > > > be required in the case of fscache configured and enabled, > > > > > > > > because we could have some of the data in a read in > > > > > > > > fscache, and some not. That is the reason for the netfs > > > > > > > > design, and why we need to be able to call the normal > > > > > > > > NFS read IO path (netfs calls into issue_read, and we call > > > > > > > > back via netfs_subreq_terminated)? > > > > > > > > > > > > > > > > @@ -101,6 +101,9 @@ struct nfs_pageio_descriptor { > > > > > > > > struct pnfs_layout_segment *pg_lseg; > > > > > > > > struct nfs_io_completion *pg_io_completion; > > > > > > > > struct nfs_direct_req *pg_dreq; > > > > > > > > +#ifdef CONFIG_NFS_FSCACHE > > > > > > > > + void *pg_netfs; > > > > > > > > +#endif > > > > > > > > > > > > > > > > @@ -1619,6 +1619,9 @@ struct nfs_pgio_header { > > > > > > > > const struct nfs_rw_ops *rw_ops; > > > > > > > > struct nfs_io_completion *io_completion; > > > > > > > > struct nfs_direct_req *dreq; > > > > > > > > +#ifdef CONFIG_NFS_FSCACHE > > > > > > > > + void *netfs; > > > > > > > > +#endif > > > > > > > > > > > > > > > > > > > > > > > > And these additions to pagelist.c? > > > > > > > > > > > > > > > > @@ -68,6 +69,10 @@ void nfs_pgheader_init(struct > > > > > > > > nfs_pageio_descriptor *desc, > > > > > > > > hdr->good_bytes = mirror->pg_count; > > > > > > > > hdr->io_completion = desc->pg_io_completion; > > > > > > > > hdr->dreq = desc->pg_dreq; > > > > > > > > +#ifdef CONFIG_NFS_FSCACHE > > > > > > > > + if (desc->pg_netfs) > > > > > > > > + hdr->netfs = desc->pg_netfs; > > > > > > > > +#endif > > > > > > > > > > > > > > Why the conditional? > > > > > > > > > > > > > Not really needed and I was thinking of removing it, so I'll do that. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > @@ -846,6 +851,9 @@ void nfs_pageio_init(struct nfs_pageio_descriptor > > > > > > > > *desc, > > > > > > > > desc->pg_lseg = NULL; > > > > > > > > desc->pg_io_completion = NULL; > > > > > > > > desc->pg_dreq = NULL; > > > > > > > > +#ifdef CONFIG_NFS_FSCACHE > > > > > > > > + desc->pg_netfs = NULL; > > > > > > > > +#endif > > > > > > > > > > > > > > > > > > > > > > > > @@ -1360,6 +1369,9 @@ int nfs_pageio_resend(struct > > > > > > > > nfs_pageio_descriptor *desc, > > > > > > > > > > > > > > > > desc->pg_io_completion = hdr->io_completion; > > > > > > > > desc->pg_dreq = hdr->dreq; > > > > > > > > +#ifdef CONFIG_NFS_FSCACHE > > > > > > > > + desc->pg_netfs = hdr->netfs; > > > > > > > > +#endif > > > > > > > > > > > > > > Those all need wrapper functions instead of embedding #ifdefs. > > > > > > > > > > > > > Ok. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > My expectation is that the standard I/O path should have minimal > > > > > > > > > overhead, and should certainly not increase the overhead that we > > > > > > > > > already have. Will this be addressed in future iterations of these > > > > > > > > > patches? > > > > > > > > > > > > > > > > > > > > > > > > > I will do what I can to satisfy what you want, either by fixing up > > > > > > > > this patch or follow-on patches. Hopefully the above questions > > > > > > > > will clarify the next steps. > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > Trond Myklebust > > > > > > > Linux NFS client maintainer, Hammerspace > > > > > > > trond.myklebust@xxxxxxxxxxxxxxx > > > > > > > > > > > > > > > > Trond Myklebust > > > > CTO, Hammerspace Inc > > > > 1900 S Norfolk St, Suite 350 - #45 > > > > San Mateo, CA 94403 > > > > > > > > www.hammer.space > > > > > > > > > > > > > -- Jeff Layton <jlayton@xxxxxxxxxxxxxxx> -- Linux-cachefs mailing list Linux-cachefs@xxxxxxxxxx https://listman.redhat.com/mailman/listinfo/linux-cachefs
