hci_abort_conn() is a wrapper around a number of DISCONNECT and
CREATE_CONN_CANCEL commands that was being invoked from hci_request
request queues, which are now deprecated. There are two versions:
hci_abort_conn() which can be invoked from the hci_event thread, and
hci_abort_conn_sync() which can be invoked within a hci_sync cmd chain.
Signed-off-by: Brian Gix <brian.gix@xxxxxxxxx>
---
include/net/bluetooth/hci_core.h | 1 +
net/bluetooth/hci_conn.c | 76 ++++++++++++++++++++++++++
net/bluetooth/hci_request.c | 93 --------------------------------
net/bluetooth/hci_request.h | 1 -
net/bluetooth/mgmt.c | 16 +++++-
5 files changed, 92 insertions(+), 95 deletions(-)
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index e7862903187d..932153e68864 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -2075,6 +2075,7 @@ int mgmt_phy_configuration_changed(struct hci_dev *hdev, struct sock *skip);
void mgmt_adv_monitor_device_lost(struct hci_dev *hdev, u16 handle,
bdaddr_t *bdaddr, u8 addr_type);
+int hci_abort_conn(struct hci_conn *conn, u8 reason);
u8 hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, u16 latency,
u16 to_multiplier);
void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __le64 rand,
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 337e74d0f8b1..7a59c4487050 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -2760,3 +2760,79 @@ u32 hci_conn_get_phy(struct hci_conn *conn)
return phys;
}
+
+int hci_abort_conn(struct hci_conn *conn, u8 reason)
+{
+ int r = 0;
+
+ switch (conn->state) {
+ case BT_CONNECTED:
+ case BT_CONFIG:
+ if (conn->type == AMP_LINK) {
+ struct hci_cp_disconn_phy_link cp;
+
+ cp.phy_handle = HCI_PHY_HANDLE(conn->handle);
+ cp.reason = reason;
+ r = hci_send_cmd(conn->hdev, HCI_OP_DISCONN_PHY_LINK,
+ sizeof(cp), &cp);
+ } else {
+ struct hci_cp_disconnect dc;
+
+ dc.handle = cpu_to_le16(conn->handle);
+ dc.reason = reason;
+ r = hci_send_cmd(conn->hdev, HCI_OP_DISCONNECT,
+ sizeof(dc), &dc);
+ }
+
+ conn->state = BT_DISCONN;
+
+ break;
+ case BT_CONNECT:
+ if (conn->type == LE_LINK) {
+ if (test_bit(HCI_CONN_SCANNING, &conn->flags))
+ break;
+ r = hci_send_cmd(conn->hdev,
+ HCI_OP_LE_CREATE_CONN_CANCEL, 0, NULL);
+ } else if (conn->type == ACL_LINK) {
+ if (conn->hdev->hci_ver < BLUETOOTH_VER_1_2)
+ break;
+ r = hci_send_cmd(conn->hdev,
+ HCI_OP_CREATE_CONN_CANCEL,
+ 6, &conn->dst);
+ }
+ break;
+ case BT_CONNECT2:
+ if (conn->type == ACL_LINK) {
+ struct hci_cp_reject_conn_req rej;
+
+ bacpy(&rej.bdaddr, &conn->dst);
+ rej.reason = reason;
+
+ r = hci_send_cmd(conn->hdev,
+ HCI_OP_REJECT_CONN_REQ,
+ sizeof(rej), &rej);
+ } else if (conn->type == SCO_LINK || conn->type == ESCO_LINK) {
+ struct hci_cp_reject_sync_conn_req rej;
+
+ bacpy(&rej.bdaddr, &conn->dst);
+
+ /* SCO rejection has its own limited set of
+ * allowed error values (0x0D-0x0F) which isn't
+ * compatible with most values passed to this
+ * function. To be safe hard-code one of the
+ * values that's suitable for SCO.
+ */
+ rej.reason = HCI_ERROR_REJ_LIMITED_RESOURCES;
+
+ r = hci_send_cmd(conn->hdev,
+ HCI_OP_REJECT_SYNC_CONN_REQ,
+ sizeof(rej), &rej);
+ }
+ break;
+ default:
+ conn->state = BT_CLOSED;
+ break;
+ }
+
+ return r;
+}
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index 2e19a271d7a1..5a0296a4352e 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -909,99 +909,6 @@ static void set_random_addr(struct hci_request *req, bdaddr_t *rpa)
hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6, rpa);
}
-static void __hci_abort_conn(struct hci_request *req, struct hci_conn *conn,
- u8 reason)
-{
- switch (conn->state) {
- case BT_CONNECTED:
- case BT_CONFIG:
- if (conn->type == AMP_LINK) {
- struct hci_cp_disconn_phy_link cp;
-
- cp.phy_handle = HCI_PHY_HANDLE(conn->handle);
- cp.reason = reason;
- hci_req_add(req, HCI_OP_DISCONN_PHY_LINK, sizeof(cp),
- &cp);
- } else {
- struct hci_cp_disconnect dc;
-
- dc.handle = cpu_to_le16(conn->handle);
- dc.reason = reason;
- hci_req_add(req, HCI_OP_DISCONNECT, sizeof(dc), &dc);
- }
-
- conn->state = BT_DISCONN;
-
- break;
- case BT_CONNECT:
- if (conn->type == LE_LINK) {
- if (test_bit(HCI_CONN_SCANNING, &conn->flags))
- break;
- hci_req_add(req, HCI_OP_LE_CREATE_CONN_CANCEL,
- 0, NULL);
- } else if (conn->type == ACL_LINK) {
- if (req->hdev->hci_ver < BLUETOOTH_VER_1_2)
- break;
- hci_req_add(req, HCI_OP_CREATE_CONN_CANCEL,
- 6, &conn->dst);
- }
- break;
- case BT_CONNECT2:
- if (conn->type == ACL_LINK) {
- struct hci_cp_reject_conn_req rej;
-
- bacpy(&rej.bdaddr, &conn->dst);
- rej.reason = reason;
-
- hci_req_add(req, HCI_OP_REJECT_CONN_REQ,
- sizeof(rej), &rej);
- } else if (conn->type == SCO_LINK || conn->type == ESCO_LINK) {
- struct hci_cp_reject_sync_conn_req rej;
-
- bacpy(&rej.bdaddr, &conn->dst);
-
- /* SCO rejection has its own limited set of
- * allowed error values (0x0D-0x0F) which isn't
- * compatible with most values passed to this
- * function. To be safe hard-code one of the
- * values that's suitable for SCO.
- */
- rej.reason = HCI_ERROR_REJ_LIMITED_RESOURCES;
-
- hci_req_add(req, HCI_OP_REJECT_SYNC_CONN_REQ,
- sizeof(rej), &rej);
- }
- break;
- default:
- conn->state = BT_CLOSED;
- break;
- }
-}
-
-static void abort_conn_complete(struct hci_dev *hdev, u8 status, u16 opcode)
-{
- if (status)
- bt_dev_dbg(hdev, "Failed to abort connection: status 0x%2.2x", status);
-}
-
-int hci_abort_conn(struct hci_conn *conn, u8 reason)
-{
- struct hci_request req;
- int err;
-
- hci_req_init(&req, conn->hdev);
-
- __hci_abort_conn(&req, conn, reason);
-
- err = hci_req_run(&req, abort_conn_complete);
- if (err && err != -ENODATA) {
- bt_dev_err(conn->hdev, "failed to run HCI request: err %d", err);
- return err;
- }
-
- return 0;
-}
-
void hci_request_setup(struct hci_dev *hdev)
{
INIT_DELAYED_WORK(&hdev->interleave_scan, interleave_scan_work);
diff --git a/net/bluetooth/hci_request.h b/net/bluetooth/hci_request.h
index 7e1de871fca4..b9c5a9823837 100644
--- a/net/bluetooth/hci_request.h
+++ b/net/bluetooth/hci_request.h
@@ -73,6 +73,5 @@ void hci_req_add_le_passive_scan(struct hci_request *req);
void hci_req_prepare_suspend(struct hci_dev *hdev, enum suspended_state next);
-int hci_abort_conn(struct hci_conn *conn, u8 reason);
void hci_request_setup(struct hci_dev *hdev);
void hci_request_cancel_all(struct hci_dev *hdev);
diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index df20e15a05da..11c274fdcbcd 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -3185,6 +3185,19 @@ static int pair_device(struct sock *sk, struct hci_dev *hdev, void *data,
return err;
}
+static int abort_conn_sync(struct hci_dev *hdev, void *data)
+{
+ struct hci_conn *conn;
+ __u8 handle = (__u8) PTR_ERR(data);
+
+ conn = hci_conn_hash_lookup_big(hdev, handle);
+
+ if (!conn)
+ return 0;
+
+ return hci_abort_conn_sync(hdev, conn, HCI_ERROR_REMOTE_USER_TERM);
+}
+
static int cancel_pair_device(struct sock *sk, struct hci_dev *hdev, void *data,
u16 len)
{
@@ -3235,7 +3248,8 @@ static int cancel_pair_device(struct sock *sk, struct hci_dev *hdev, void *data,
le_addr_type(addr->type));
if (conn->conn_reason == CONN_REASON_PAIR_DEVICE)
- hci_abort_conn(conn, HCI_ERROR_REMOTE_USER_TERM);
+ hci_cmd_sync_queue(hdev, abort_conn_sync, ERR_PTR(conn->handle),
+ NULL);
unlock:
hci_dev_unlock(hdev);
--
2.37.1
