These patches add an optional device specific data member to specify max
baudrate of a device when in autobaud mode. This allows the host to set a
first baudrate higher than "init speed" to improve FW load time.
The host baudrate will later be changed to "init speed" (as usual) once FW
loading is complete and the device has been reset to begin normal
operation.
Hakan Jansson (4):
dt-bindings: net: broadcom-bluetooth: Add CYW55572 DT binding
Bluetooth: hci_bcm: Add DT compatible for CYW55572
Bluetooth: hci_bcm: Prevent early baudrate setting in autobaud mode
Bluetooth: hci_bcm: Increase host baudrate for CYW55572 in autobaud
mode
.../bindings/net/broadcom-bluetooth.yaml | 1 +
drivers/bluetooth/hci_bcm.c | 24 +++++++++++++------
2 files changed, 18 insertions(+), 7 deletions(-)
base-commit: 0b537674e072a37dec2fcefef4df2317b58aaa3f
--
2.25.1
