From: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> This adds isotest.rst which documents the modes and options of isotest(1) and is then converted isotest.1 manpage. --- Makefile.tools | 4 +- tools/isotest.rst | 202 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 204 insertions(+), 2 deletions(-) create mode 100644 tools/isotest.rst diff --git a/Makefile.tools b/Makefile.tools index 3e949c00c..3c5766728 100644 --- a/Makefile.tools +++ b/Makefile.tools @@ -320,7 +320,7 @@ profiles_iap_iapd_SOURCES = profiles/iap/main.c profiles_iap_iapd_LDADD = gdbus/libgdbus-internal.la $(GLIB_LIBS) $(DBUS_LIBS) if MANPAGES -man_MANS += tools/rctest.1 tools/l2ping.1 tools/btattach.1 +man_MANS += tools/rctest.1 tools/l2ping.1 tools/btattach.1 tools/isotest.1 endif if MESH @@ -438,7 +438,7 @@ manual_pages += tools/hciattach.1 tools/hciconfig.1 \ tools/hcitool.1 tools/hcidump.1 \ tools/rfcomm.1 tools/sdptool.1 tools/ciptool.1 \ tools/rctest.1 tools/l2ping.1 tools/btattach.1 \ - tools/bdaddr.1 + tools/bdaddr.1 tools/isotest.1 if HID2HCI udevdir = $(UDEV_DIR) diff --git a/tools/isotest.rst b/tools/isotest.rst new file mode 100644 index 000000000..b2f4e4b38 --- /dev/null +++ b/tools/isotest.rst @@ -0,0 +1,202 @@ +======= +isotest +======= + +----------- +ISO testing +----------- + +:Authors: - Luiz Augusto Von Dentz <luiz.von.dentz@xxxxxxxxx> +:Version: BlueZ +:Copyright: Free use of this software is granted under ther terms of the GNU + Lesser General Public Licenses (LGPL). +:Date: May 4, 2022 +:Manual section: 1 +:Manual group: Linux System Administration + +SYNOPSIS +======== + +**isotest** <*MODE*> [*OPTIONS*] [*bdaddr*] [*bdaddr1*]... + +DESCRIPTION +=========== + +**isotest(1)** is used to test Isochronous (CIS/BIS) communications on the +BlueZ stack + +MODES +===== + +-d, --dump=[FILE] Listen and dump incoming data + (CIS server/BIS broadcaster) and optionally save the + contents to *FILE*. + +-c, --reconnect Reconnect (CIS client). + +-m, --multiple Multiple connects (CIS client). + +-r, --receive=[FILE] Receive (CIS server/BIS broadcast receiver) and + optionally save the contents to *FILE*. + +-s, --send=[FILE] Connect and send (CIS client/BIS broadcaster), can + optionally use contents from *FILE*. + +-n, --silent Connect and be silent (CIS client/BIS broadcaster). + +OPTIONS +======= + +-b, --bytes=<SIZE> Send or Receive packet size + +-i, --index=<NUM> Select the specified HCI device index. *hciNUM* is + also acceptable. + +-j, --jitter=<JITTER> Socket jitter buffer. + +-h, --help + +-q, --quiet Disables packet logging. + +-t, --timeout=<USEC> Socket send timeout. + +-C, --continue Continuously send packets starting over in case of a + file. + +-W, --defer=<SEC> Enable deferred setup. + +-M, --mtu=<SDU> Socket QoS SDU. + +-S, --sca/adv-interval=<SCA/INTERVAL> + Socket QoS CIS SCA/BIS advertising interval. + +-P, --packing=<PACKING> Socket QoS Packing. + +.. list-table:: + :header-rows: 1 + :widths: auto + :stub-columns: 1 + :align: left + + * - *PACKING* + - Description + + * - **0x00** + - Sequential + + * - **0x01** + - Interleaved + +-F, --framing=<FRAMING> Socket QoS Framing. + +.. list-table:: + :header-rows: 1 + :widths: auto + :stub-columns: 1 + :align: left + + * - *FRAMING* + - Description + + * - **0x00** + - Unframed + + * - **0x01** + - Framed + +-I, --interval=<USEC> Socket QoS Interval. + +-L, --latency=<MSEC> Socket QoS Latency. + +-Y, --phy=<PHY> Socket QoS PHY. + +.. list-table:: + :header-rows: 1 + :widths: auto + :stub-columns: 1 + :align: left + + * - *PHY* + - Description + + * - **0x01** + - LE 1M + + * - **0x02** + - LE 2M + + * - **0x03** + - LE Coded + +-R, --rtn=<NUM> Socket QoS retransmissions. + +-B, --preset=<PRESET> Socket QoS preset. + +-G, --CIG/BIG=<ID> Socket QoS CIG/BIG ID. + +-T, --CIS/BIS=<ID> Socket QoS CIS/BIS ID. + +-V, --type=<TYPE> Socket destination address type: + +.. list-table:: + :header-rows: 1 + :widths: auto + :stub-columns: 1 + :align: left + + * - *TYPE* + - Description + + * - **le_public** + - LE Public Address + + * - **le_random** + - LE Random Address + +EXAMPLES +======== + +Unicast Central +--------------- + +.. code-block:: + + $ tools/isotest -s XX:XX:XX:XX:XX:XX + +Unicast Central connecting to 2 peers using CIG 0x01 +---------------------------------------------------- + +.. code-block:: + + $ tools/isotest -G 0x01 -s XX:XX:XX:XX:XX:XX YY:YY:YY:YY:YY:YY + +Unicast Peripheral +------------------ + +.. code-block:: + + $ tools/isotest -d + +Broadcaster +----------- + +.. code-block:: + + $ tools/isotest -s 00:00:00:00:00:00 + +Broadcast Receiver using hci1 +----------------------------- + +.. code-block:: + + $ tools/isotest -i hci1 -d XX:XX:XX:XX:XX:XX + +RESOURCES +========= + +http://www.bluez.org + +REPORTING BUGS +============== + +linux-bluetooth@xxxxxxxxxxxxxxx -- 2.35.1
