Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading. Autobaud mode can also be required on some boards where the controller device is using a non-standard baud rate when first powered on. Only a limited subset of HCI commands are supported in autobaud mode. These patches add a DT property, "brcm,uses-autobaud-mode", to control autobaud mode selection. Hakan Jansson (2): dt-bindings: net: broadcom-bluetooth: Add property for autobaud mode Bluetooth: hci_bcm: Add support for FW loading in autobaud mode .../bindings/net/broadcom-bluetooth.yaml | 7 +++++ drivers/bluetooth/btbcm.c | 31 ++++++++++++++----- drivers/bluetooth/btbcm.h | 8 ++--- drivers/bluetooth/hci_bcm.c | 15 +++++++-- 4 files changed, 46 insertions(+), 15 deletions(-) base-commit: 48b57999e38745b707abe233019786cc097df3c9 -- 2.25.1
