This patch was tested on some really popular AliExpress-style
dongles, in my case marked as "V5.0". Chip markings: UG8413,
the backside of the PCB says "USB Dangel" (sic).
Here is the `hciconfig -a` output; for completeness:
hci0: Type: Primary Bus: USB
BD Address: 00:1A:7D:DA:7X:XX ACL MTU: 679:8 SCO MTU: 48:16
UP RUNNING PSCAN ISCAN
Features: 0xbf 0x3e 0x4d 0xfa 0xdb 0x3d 0x7b 0xc7
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH SNIFF
Link mode: PERIPHERAL ACCEPT
Name: 'CSR8510 A10.'
Class: 0x7c0104
Service Classes: Rendering, Capturing, Object Transfer, Audio, Telephony
Device Class: Computer, Desktop workstation
HCI Version: 4.0 (0x6) Revision: 0x3120
LMP Version: 4.0 (0x6) Subversion: 0x22bb
Manufacturer: Cambridge Silicon Radio (10)
As well as the `lsusb -vv -d 0a12:0001`:
ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x0a12 Cambridge Silicon Radio, Ltd
idProduct 0x0001 Bluetooth Dongle (HCI mode)
bcdDevice 88.91
iManufacturer 0
iProduct 2 BT DONGLE10
iSerial 0
bNumConfigurations 1
Also, changed the benign dmesg print that shows up whenever the
generic force-suspend fails from bt_dev_err to bt_dev_warn;
it's okay and done on a best-effort basis, not a problem
if that does not work.
Also, swapped the HCI subver and LMP subver numbers for the Barrot
in the comment, which I copied wrong the last time around.
Fixes: 81cac64ba258a ("Bluetooth: Deal with USB devices that are faking CSR vendor")
Fixes: cde1a8a992875 ("Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllers")
Fixes: d74e0ae7e0303 ("Bluetooth: btusb: Fix detection of some fake CSR controllers with a bcdDevice val of 0x0134")
Fixes: 0671c0662383e ("Bluetooth: btusb: Add workaround for remote-wakeup issues with Barrot 8041a02 fake CSR controllers")
Fixes: f4292e2faf522 ("Bluetooth: btusb: Make the CSR clone chip force-suspend workaround more generic")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=60824
Link: https://gist.github.com/nevack/6b36b82d715dc025163d9e9124840a07
Cc: stable@xxxxxxxxxxxxxxx
Cc: Hans de Goede <hdegoede@xxxxxxxxxx>
Tested-by: Gonzalo TornarÃa <tornaria@xxxxxxxxxxx>
Tested-by: Mateus Lemos <lemonsmateus@xxxxxxxxx>
Tested-by: Ismael Ferreras Morezuelas <swyterzone@xxxxxxxxx>
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@xxxxxxxxx>
---
Changes for v3:
* Simplified and updated the hci_sync.c code after the state-machine
changes; the hci_core.c and hci_request.c parts no longer exist.
As requested by Marcel.
Funnily enough, the HCI code does not unconditionally send a
clear-all anymore on bring-up, so I have received reports of
the bug being "fixed" without patching. But there might be
more ways of hitting these codepaths in the future as the
kernel develops.
So yeah, the controller limitation is still there, but
doesn't get exercised because we don't do it like that.
* Shortened the patch subject, as suggested by Paul Menzel.
Changes for v2:
* Added HCI_QUIRK_NO_SUSPEND_NOTIFIER to btusb_setup_csr().
In theory we already disable runtime suspend in btusb, button
better safe than sorry. Doesn't hurt to explicitly avoid the
hci_suspend_dev() codepath, it also works as example.
* Improved the quirk description in hci.h, as suggested by Hans
de Goede. Explain the need to disable runtime suspend.
* Also check for the quirk in hci_req_set_event_filter();
mirror its hci_req_clear_event_filter() counterpart.
* The struct hci_dev *hdev variables always go first.
* Removed some misc formatting changes.
drivers/bluetooth/btusb.c | 6 ++++--
include/net/bluetooth/hci.h | 10 ++++++++++
net/bluetooth/hci_sync.c | 16 ++++++++++++++++
3 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 1bb00b7547fb..73a4c9dd77c2 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2057,6 +2057,8 @@ static int btusb_setup_csr(struct hci_dev *hdev)
*/
set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
+ set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks);
+ set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks);
/* Clear the reset quirk since this is not an actual
* early Bluetooth 1.1 device from CSR.
@@ -2067,7 +2069,7 @@ static int btusb_setup_csr(struct hci_dev *hdev)
/*
* Special workaround for these BT 4.0 chip clones, and potentially more:
*
- * - 0x0134: a Barrot 8041a02 (HCI rev: 0x1012 sub: 0x0810)
+ * - 0x0134: a Barrot 8041a02 (HCI rev: 0x0810 sub: 0x1012)
* - 0x7558: IC markings FR3191AHAL 749H15143 (HCI rev/sub-version: 0x0709)
*
* These controllers are really messed-up.
@@ -2096,7 +2098,7 @@ static int btusb_setup_csr(struct hci_dev *hdev)
if (ret >= 0)
msleep(200);
else
- bt_dev_err(hdev, "CSR: Failed to suspend the device for our Barrot 8041a02 receive-issue workaround");
+ bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround");
pm_runtime_forbid(&data->udev->dev);
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 35c073d44ec5..5cb095b09a94 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -255,6 +255,16 @@ enum {
* during the hdev->setup vendor callback.
*/
HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER,
+
+ /* When this quirk is set, HCI_OP_SET_EVENT_FLT requests with
+ * HCI_FLT_CLEAR_ALL are ignored and event filtering is
+ * completely avoided. A subset of the CSR controller
+ * clones struggle with this and instantly lock up.
+ *
+ * Note that devices using this must (separately) disable
+ * runtime suspend, because event filtering takes place there.
+ */
+ HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL,
};
/* HCI device flags */
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index e31d1150dc71..c3bdaf2de511 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -2812,6 +2812,9 @@ static int hci_set_event_filter_sync(struct hci_dev *hdev, u8 flt_type,
if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))
return 0;
+ if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks))
+ return 0;
+
memset(&cp, 0, sizeof(cp));
cp.flt_type = flt_type;
@@ -2832,6 +2835,13 @@ static int hci_clear_event_filter_sync(struct hci_dev *hdev)
if (!hci_dev_test_flag(hdev, HCI_EVENT_FILTER_CONFIGURED))
return 0;
+ /* In theory the state machine should not reach here unless
+ * a hci_set_event_filter_sync() call succeeds, but we do
+ * the check both for parity and as a future reminder.
+ */
+ if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks))
+ return 0;
+
return hci_set_event_filter_sync(hdev, HCI_FLT_CLEAR_ALL, 0x00,
BDADDR_ANY, 0x00);
}
@@ -4831,6 +4841,12 @@ static int hci_update_event_filter_sync(struct hci_dev *hdev)
if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))
return 0;
+ /* Some fake CSR controllers lock up after setting this type of
+ * filter, so avoid sending the request altogether.
+ */
+ if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks))
+ return 0;
+
/* Always clear event filter when starting */
hci_clear_event_filter_sync(hdev);
--
2.35.1
