Hi Joseph, > Add the Set Quality Report Command in doc/mgmt-api.txt. > > Signed-off-by: Joseph Hwang <josephsih@xxxxxxxxxxxx> > --- > > Changes in v3: > - This is a new patch that introduces the Set Quality Report > Command. > > doc/mgmt-api.txt | 33 +++++++++++++++++++++++++++++++++ > 1 file changed, 33 insertions(+) > > diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt > index 5a32091fa..4ac84d41b 100644 > --- a/doc/mgmt-api.txt > +++ b/doc/mgmt-api.txt > @@ -332,6 +332,7 @@ Read Controller Information Command > 15 Static Address > 16 PHY Configuration > 17 Wideband Speech > + 18 Quality Report > > This command generates a Command Complete event on success or > a Command Status event on failure. > @@ -2924,6 +2925,7 @@ Read Extended Controller Information Command > 15 Static Address > 16 PHY Configuration > 17 Wideband Speech > + 18 Quality Report > > The EIR_Data field contains information about class of device, > local name and other values. Not all of them might be present. For > @@ -3858,6 +3860,37 @@ Add Advertisement Patterns Monitor With RSSI Threshold Command > Invalid Parameters > > > +Set Quality Report Command > +========================== > + > + Command Code: 0x0057 > + Controller Index: <controller id> > + Command Parameters: Action (1 Octet) Quality_Report (1 Octet) > + Return Parameters: Current_Settings (4 Octets) > + > + This command is used to enable and disable the controller's quality > + report feature. > + > + This command requires to use a valid controller index. Otherwise, > + an "invalid index" status will be returned. > + > + The parameter "action" can be either 0 to disable the feature or > + 1 to enable the feature. For any values other than 0 and 1, an > + "invalid parameters" status will be returned. > + > + If the driver does not indicate that the controller supports the > + quality report feature, a "not supported" status will be returned. > + > + The command is sent to the controller to enable/disable the quality > + report feature. If the controller failed to execute the action, a > + "failed" status will be returned. > + > + Possible errors: Failed > + Invalid Index > + Invalid Parameters > + Not Supported > + > + You might want to have the description a bit more in line with the others like Set Wideband Speech etc. Regards Marcel
