Add a variation of RTL8822CS with hci_ver = 0x08. This is fully similar
to RTL8822CS with hci_ver = 0x0a observed on the Tanix TX6 Android
set-top box and JetHome JetHub H1.
Signed-off-by: Vyacheslav Bocharov <adeep@xxxxxxxxx>
Signed-off-by: Rudi Heitbaum <rudi@xxxxxxxxxxxx>
---
drivers/bluetooth/btrtl.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index c2bdd1e6060e..c2030f7e25b4 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -148,6 +148,14 @@ static const struct id_table ic_id_table[] = {
.fw_name = "rtl_bt/rtl8761bu_fw.bin",
.cfg_name = "rtl_bt/rtl8761bu_config" },
+ /* 8822C with UART interface */
+ { IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0x8, HCI_UART),
+ .config_needed = true,
+ .has_rom_version = true,
+ .has_msft_ext = true,
+ .fw_name = "rtl_bt/rtl8822cs_fw.bin",
+ .cfg_name = "rtl_bt/rtl8822cs_config" },
+
/* 8822C with UART interface */
{ IC_INFO(RTL_ROM_LMP_8822B, 0xc, 0xa, HCI_UART),
.config_needed = true,
--
2.30.2
