Hi Ismael,
> Another subset of the more recent batch of Chinese clones aren't
> specs-compliant and seem to lock up whenever they receive a
> HCI_OP_SET_EVENT_FLT with flt_type set to zero/HCI_FLT_CLEAR_ALL,
> which on Linux happens right at BR/EDR setup.
>
> So, while all the previous efforts to wrangle the herd of fake CSRs
> seem to be paying off (and these also get detected as such) we
> still need to take care of this quirk; testers seem to agree
> that these dongles tend to work well enough afterwards.
>
> From some cursory USB packet capture on Windows it seems like
> that driver doesn't appear to use this clear-all functionality at all.
>
> This patch was tested on some really popular AliExpress-style
> dongles, in my case marked as "V5.0". Chip markings: UG8413,
> the backside of the PCB says "USB Dangel" (sic).
>
> Here is the `hciconfig -a` output; for completeness:
>
> hci0: Type: Primary Bus: USB
> BD Address: 00:1A:7D:DA:7X:XX ACL MTU: 679:8 SCO MTU: 48:16
> UP RUNNING PSCAN ISCAN
> Features: 0xbf 0x3e 0x4d 0xfa 0xdb 0x3d 0x7b 0xc7
> Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
> Link policy: RSWITCH SNIFF
> Link mode: PERIPHERAL ACCEPT
> Name: 'CSR8510 A10.'
> Class: 0x7c0104
> Service Classes: Rendering, Capturing, Object Transfer, Audio, Telephony
> Device Class: Computer, Desktop workstation
> HCI Version: 4.0 (0x6) Revision: 0x3120
> LMP Version: 4.0 (0x6) Subversion: 0x22bb
> Manufacturer: Cambridge Silicon Radio (10)
>
>
> As well as the `lsusb -vv -d 0a12:0001`:
>
> ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 224 Wireless
> bDeviceSubClass 1 Radio Frequency
> bDeviceProtocol 1 Bluetooth
> bMaxPacketSize0 64
> idVendor 0x0a12 Cambridge Silicon Radio, Ltd
> idProduct 0x0001 Bluetooth Dongle (HCI mode)
> bcdDevice 88.91
> iManufacturer 0
> iProduct 2 BT DONGLE10
> iSerial 0
> bNumConfigurations 1
>
> Also, changed the benign dmesg print that shows up whenever the
> generic force-suspend fails from bt_dev_err to bt_dev_warn;
> it's okay and done on a best-effort basis, not a problem
> if that does not work.
>
> Also, swapped the HCI subver and LMP subver numbers for the Barrot
> in the comment, which I copied wrong the last time around.
>
> Fixes: 81cac64ba258a ("Bluetooth: Deal with USB devices that are faking CSR vendor")
> Fixes: cde1a8a992875 ("Bluetooth: btusb: Fix and detect most of the Chinese Bluetooth controllers")
> Fixes: d74e0ae7e0303 ("Bluetooth: btusb: Fix detection of some fake CSR controllers with a bcdDevice val of 0x0134")
> Fixes: 0671c0662383e ("Bluetooth: btusb: Add workaround for remote-wakeup issues with Barrot 8041a02 fake CSR controllers")
> Fixes: f4292e2faf522 ("Bluetooth: btusb: Make the CSR clone chip force-suspend workaround more generic")
>
> https://bugzilla.kernel.org/show_bug.cgi?id=60824
> https://gist.github.com/nevack/6b36b82d715dc025163d9e9124840a07
>
> Cc: stable@xxxxxxxxxxxxxxx
> Cc: Hans de Goede <hdegoede@xxxxxxxxxx>
> Tested-by: Gonzalo Tornaría <tornaria@xxxxxxxxxxx>
> Tested-by: Mateus Lemos <lemonsmateus@xxxxxxxxx>
> Tested-by: Ismael Ferreras Morezuelas <swyterzone@xxxxxxxxx>
> Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@xxxxxxxxx>
>
> ---
>
> drivers/bluetooth/btusb.c | 11 ++++++-----
> include/net/bluetooth/hci.h | 6 ++++++
> net/bluetooth/hci_core.c | 11 ++++++++---
> net/bluetooth/hci_request.c | 8 ++++++--
> 4 files changed, 26 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 75c83768c..42c909c24 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -1932,6 +1932,7 @@ static int btusb_setup_csr(struct hci_dev *hdev)
> */
> set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
> set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
> + set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks);
>
> /* Clear the reset quirk since this is not an actual
> * early Bluetooth 1.1 device from CSR.
> @@ -1942,16 +1943,16 @@ static int btusb_setup_csr(struct hci_dev *hdev)
> /*
> * Special workaround for these BT 4.0 chip clones, and potentially more:
> *
> - * - 0x0134: a Barrot 8041a02 (HCI rev: 0x1012 sub: 0x0810)
> + * - 0x0134: a Barrot 8041a02 (HCI rev: 0x0810 sub: 0x1012)
Don’t get this change.
> * - 0x7558: IC markings FR3191AHAL 749H15143 (HCI rev/sub-version: 0x0709)
> *
> * These controllers are really messed-up.
> *
> * 1. Their bulk RX endpoint will never report any data unless
> - * the device was suspended at least once (yes, really).
> + * the device was suspended at least once (yes, really).
> * 2. They will not wakeup when autosuspended and receiving data
> - * on their bulk RX endpoint from e.g. a keyboard or mouse
> - * (IOW remote-wakeup support is broken for the bulk endpoint).
> + * on their bulk RX endpoint from e.g. a keyboard or mouse
> + * (IOW remote-wakeup support is broken for the bulk endpoint).
Fix the style issues separately.
> *
> * To fix 1. enable runtime-suspend, force-suspend the
> * HCI and then wake-it up by disabling runtime-suspend.
> @@ -1971,7 +1972,7 @@ static int btusb_setup_csr(struct hci_dev *hdev)
> if (ret >= 0)
> msleep(200);
> else
> - bt_dev_err(hdev, "CSR: Failed to suspend the device for our Barrot 8041a02 receive-issue workaround");
> + bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround");
Why change this?
>
> pm_runtime_forbid(&data->udev->dev);
>
> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
> index 63065bc01..4e5d5979d 100644
> --- a/include/net/bluetooth/hci.h
> +++ b/include/net/bluetooth/hci.h
> @@ -246,6 +246,12 @@ enum {
> * HCI after resume.
> */
> HCI_QUIRK_NO_SUSPEND_NOTIFIER,
> +
> + /* When this quirk is set, HCI_OP_SET_EVENT_FLT requests with
> + * HCI_FLT_CLEAR_ALL are ignored. A subset of the CSR controller
> + * clones struggle with this and instantly lock up.
> + */
> + HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL,
> };
>
> /* HCI device flags */
> diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
> index 8d33aa648..7af649afc 100644
> --- a/net/bluetooth/hci_core.c
> +++ b/net/bluetooth/hci_core.c
> @@ -150,6 +150,7 @@ static void bredr_setup(struct hci_request *req)
> {
> __le16 param;
> __u8 flt_type;
> + struct hci_dev *hdev = req->hdev;
This should always go first in a function.
>
> /* Read Buffer Size (ACL mtu, max pkt, etc.) */
> hci_req_add(req, HCI_OP_READ_BUFFER_SIZE, 0, NULL);
> @@ -169,9 +170,13 @@ static void bredr_setup(struct hci_request *req)
> /* Read Current IAC LAP */
> hci_req_add(req, HCI_OP_READ_CURRENT_IAC_LAP, 0, NULL);
>
> - /* Clear Event Filters */
> - flt_type = HCI_FLT_CLEAR_ALL;
> - hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type);
> + /* Clear Event Filters; some fake CSR controllers lock up after setting
> + * this type of filter, so avoid sending the request altogether.
> + */
> + if (!test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) {
> + flt_type = HCI_FLT_CLEAR_ALL;
> + hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type);
> + }
>
> /* Connection accept timeout ~20 secs */
> param = cpu_to_le16(0x7d00);
> diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
> index 92611bfc0..cfcf64c0c 100644
> --- a/net/bluetooth/hci_request.c
> +++ b/net/bluetooth/hci_request.c
> @@ -980,11 +980,15 @@ void hci_req_add_le_passive_scan(struct hci_request *req)
> static void hci_req_clear_event_filter(struct hci_request *req)
> {
> struct hci_cp_set_event_filter f;
> + struct hci_dev *hdev = req->hdev;
> +
> + if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))
> + return;
>
> - if (!hci_dev_test_flag(req->hdev, HCI_BREDR_ENABLED))
> + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks))
> return;
>
> - if (hci_dev_test_flag(req->hdev, HCI_EVENT_FILTER_CONFIGURED)) {
> + if (hci_dev_test_flag(hdev, HCI_EVENT_FILTER_CONFIGURED)) {
> memset(&f, 0, sizeof(f));
> f.flt_type = HCI_FLT_CLEAR_ALL;
> hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &f);
This is not enough. If you do not have clear event filter, we need to disable suspend/resume support. These device can for obvious reason not sleep accordingly.
Regards
Marcel
