Re: [PATCH v4] Bluetooth: btqca: sequential validation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Sai,

> This change will have sequential validation support
> & patch config command is added
> 
> Signed-off-by: Sai Teja Aluvala <quic_saluvala@xxxxxxxxxxx>
> 
> v4:
> * addressed the change from u8 cmd to const u8 cmd
> 
> v3:
> * removed rlen,rtype
> * Replaced kfree with kfree_skb
> 
> v2:
> * Added static declaration
> * Addressed wrong indentation
> * Removed EDL_PATCH_CONFIG_CMD_LEN
> 
> v1:
> *Initial patch
> ---
> drivers/bluetooth/btqca.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
> drivers/bluetooth/btqca.h |  2 ++
> 2 files changed, 50 insertions(+)
> 
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index be04d74..9091a88 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -141,6 +141,51 @@ static int qca_read_fw_build_info(struct hci_dev *hdev)
> 	return err;
> }
> 
> +static int qca_send_patch_config_cmd(struct hci_dev *hdev)
> +{
> +	struct sk_buff *skb;
> +	int err = 0;
> +	const u8 cmd[] = {EDL_PATCH_CONFIG_CMD, 0x01, 0, 0, 0};
> +	struct edl_event_hdr *edl;

I said this many times before. = {[SPACE], a, b, c[SPACE]};

And I prefer the const pieces first, and int err last.

> +
> +	bt_dev_dbg(hdev, "QCA Patch config");
> +
> +	skb = __hci_cmd_sync_ev(hdev, EDL_PATCH_CMD_OPCODE, sizeof(cmd),
> +				cmd, HCI_EV_VENDOR, HCI_INIT_TIMEOUT);
> +	if (IS_ERR(skb)) {
> +		err = PTR_ERR(skb);
> +		bt_dev_err(hdev, "Sending QCA Patch config failed (%d)", err);
> +		return err;
> +	}
> +
> +	if (skb->len != 2) {
> +		bt_dev_err(hdev, "QCA Patch config cmd size mismatch len %d", skb->len);
> +		err = -EILSEQ;
> +		goto out;
> +	}
> +
> +	edl = (struct edl_event_hdr *)(skb->data);
> +	if (!edl) {
> +		bt_dev_err(hdev, "QCA Patch config with no header");
> +		err = -EILSEQ;
> +		goto out;
> +	}
> +
> +	if (edl->cresp != EDL_PATCH_CONFIG_RES_EVT || edl->rtype != EDL_PATCH_CONFIG_CMD) {
> +		bt_dev_err(hdev, "QCA Wrong packet received %d %d", edl->cresp,
> +			   edl->rtype);
> +		err = -EIO;
> +		goto out;
> +	}
> +
> +out:
> +	kfree_skb(skb);
> +	if (err)
> +		bt_dev_err(hdev, "QCA Patch config cmd failed (%d)", err);

It is rather pointless to print two error. So just scrap this one.

> +
> +	return err;
> +}
> +
> static int qca_send_reset(struct hci_dev *hdev)
> {
> 	struct sk_buff *skb;
> @@ -551,6 +596,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> 	 */
> 	rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
> 
> +	if (soc_type == QCA_WCN6750)
> +		qca_send_patch_config_cmd(hdev);
> +
> 	/* Download rampatch file */
> 	config.type = TLV_TYPE_PATCH;
> 	if (qca_is_wcn399x(soc_type)) {
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index 30afa77..61e9a50 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -13,6 +13,7 @@
> #define EDL_PATCH_TLV_REQ_CMD		(0x1E)
> #define EDL_GET_BUILD_INFO_CMD		(0x20)
> #define EDL_NVM_ACCESS_SET_REQ_CMD	(0x01)
> +#define EDL_PATCH_CONFIG_CMD		(0x28)
> #define MAX_SIZE_PER_TLV_SEGMENT	(243)
> #define QCA_PRE_SHUTDOWN_CMD		(0xFC08)
> #define QCA_DISABLE_LOGGING		(0xFC17)
> @@ -24,6 +25,7 @@
> #define EDL_CMD_EXE_STATUS_EVT		(0x00)
> #define EDL_SET_BAUDRATE_RSP_EVT	(0x92)
> #define EDL_NVM_ACCESS_CODE_EVT		(0x0B)
> +#define EDL_PATCH_CONFIG_RES_EVT	(0x00)
> #define QCA_DISABLE_LOGGING_SUB_OP	(0x14)
> 
> #define EDL_TAG_ID_HCI			(17)

Regards

Marcel




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux