Hi Sönke, On Mon, Jan 3, 2022 at 3:41 PM Sönke Huster <soenke.huster@xxxxxxxxx> wrote: > > Hello, > > While fuzzing bluetooth-next I found the following bug: > > [ 27.333034] BUG: unable to handle page fault for address: fffff61a1a1a1a1a > [ 27.333241] #PF: supervisor read access in kernel mode > [ 27.333241] #PF: error_code(0x0000) - not-present page > [ 27.333241] PGD 6dfd2067 P4D 6dfd2067 PUD 0 > [ 27.333241] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI > [ 27.333241] CPU: 0 PID: 45 Comm: kworker/u3:2 Not tainted 5.16.0-rc1+ #81 > [ 27.333241] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 > [ 27.333241] Workqueue: hci0 hci_rx_work > [ 27.333241] RIP: 0010:hci_inquiry_result_with_rssi_evt+0xbc/0x950 > [ 27.333241] Code: 8b 04 24 48 c1 e8 03 42 80 3c 28 00 0f 85 20 07 00 00 48 8b 04 24 4c 8b 28 48 b8 00 00 00 00 00 fc ff df 4c 89 0 > [ 27.333241] RSP: 0018:ffffc900004ff9c8 EFLAGS: 00010212 > [ 27.333241] RAX: dffffc0000000000 RBX: 0000000000000022 RCX: ffffffff834663d1 > [ 27.333241] RDX: 1ffffa1a1a1a1a1a RSI: 0000000000000012 RDI: ffff88800affb074 > [ 27.333241] RBP: ffff88800aae0000 R08: ffffffff844ef360 R09: ffffffff83487b35 > [ 27.333241] R10: 000000000000002c R11: 0000000000000022 R12: ffff88800affb000 > [ 27.333241] R13: ffffd0d0d0d0d0d0 R14: 0000000000000000 R15: ffff88800aae0000 > [ 27.333241] FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000 > [ 27.333241] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 27.333241] CR2: fffff61a1a1a1a1a CR3: 0000000004a26000 CR4: 00000000000006f0 > [ 27.333241] Call Trace: > [ 27.333241] <TASK> > [ 27.333241] ? wait_for_completion_io+0x270/0x270 > [ 27.333241] ? hci_inquiry_result_evt+0x4b0/0x4b0 > [ 27.333241] hci_event_packet+0x3b11/0x7b10 > [ 27.333241] ? lock_chain_count+0x20/0x20 > [ 27.333241] ? hci_cmd_status_evt.constprop.0+0x4ea0/0x4ea0 > [ 27.333241] ? sysvec_reboot+0x50/0xc0 > [ 27.333241] ? find_held_lock+0x2c/0x110 > [ 27.333241] ? lock_release+0x3b2/0x6f0 > [ 27.333241] ? skb_dequeue+0x110/0x1a0 > [ 27.333241] ? mark_held_locks+0x9e/0xe0 > [ 27.333241] ? lockdep_hardirqs_on_prepare+0x17b/0x400 > [ 27.333241] hci_rx_work+0x4d3/0xb90 > [ 27.333241] process_one_work+0x904/0x1590 > [ 27.333241] ? lock_release+0x6f0/0x6f0 > [ 27.333241] ? pwq_dec_nr_in_flight+0x230/0x230 > [ 27.333241] ? rwlock_bug.part.0+0x90/0x90 > [ 27.333241] ? _raw_spin_lock_irq+0x41/0x50 > [ 27.333241] worker_thread+0x578/0x1310 > [ 27.333241] ? process_one_work+0x1590/0x1590 > [ 27.333241] kthread+0x3b2/0x490 > [ 27.333241] ? _raw_spin_unlock_irq+0x1f/0x40 > [ 27.333241] ? set_kthread_struct+0x100/0x100 > [ 27.333241] ret_from_fork+0x22/0x30 > [ 27.333241] </TASK> > [ 27.333241] Modules linked in: > [ 27.333241] CR2: fffff61a1a1a1a1a > [ 27.333241] ---[ end trace 6a6825484c8fefa6 ]--- > [ 27.333241] RIP: 0010:hci_inquiry_result_with_rssi_evt+0xbc/0x950 > [ 27.333241] Code: 8b 04 24 48 c1 e8 03 42 80 3c 28 00 0f 85 20 07 00 00 48 8b 04 24 4c 8b 28 48 b8 00 00 00 00 00 fc ff df 4c 89 0 > [ 27.333241] RSP: 0018:ffffc900004ff9c8 EFLAGS: 00010212 > [ 27.333241] RAX: dffffc0000000000 RBX: 0000000000000022 RCX: ffffffff834663d1 > [ 27.333241] RDX: 1ffffa1a1a1a1a1a RSI: 0000000000000012 RDI: ffff88800affb074 > [ 27.333241] RBP: ffff88800aae0000 R08: ffffffff844ef360 R09: ffffffff83487b35 > [ 27.333241] R10: 000000000000002c R11: 0000000000000022 R12: ffff88800affb000 > [ 27.333241] R13: ffffd0d0d0d0d0d0 R14: 0000000000000000 R15: ffff88800aae0000 > [ 27.333241] FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000 > [ 27.333241] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 27.333241] CR2: fffff61a1a1a1a1a CR3: 0000000004a26000 CR4: 00000000000006f0 > [ 27.379996] kworker/u3:2 (45) used greatest stack depth: 27736 bytes left > > It occurs when sending the following frame to the kernel: > > $ xxd crashes/hci_inquiry_result_with_rssi_evt > 00000000: 0422 24d0 d0d0 d0d0 d0ff ff ."$........ > > The bug was introduced with the commit "Bluetooth: HCI: Use skb_pull_data to parse Inquiry Result with RSSI event" (https://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git/commit/?id=8d08d324fdcb7). That is pretty weird, the data seems to be the following: 04 -> HCI_EVENT_PKT 22 -> HCI_EV_INQUIRY_RESULT_WITH_RSSI 24 -> hci_ev_inquiry_result_rssi.num d0 d0d0 d0d0 d0ff ff But this should never evaluate to true for: if (skb->len == flex_array_size(ev, res2->info, ev->res2->num)) { ... } else if (skb->len == flex_array_size(ev, res1->info, ev->res1->num)) { These requires the data to be multiple of sizeof(struct inquiry_info_rssi_pscan) = 15 bytes or sizeof(struct inquiry_info_rssi) = 14 bytes respectively where the data left is just 8 bytes long, besides with the number of entries being 0x24 this shall be well beyond skb->len which shall have cause the else clause: } else { bt_dev_err(hdev, "Malformed HCI Event: 0x%2.2x", HCI_EV_INQUIRY_RESULT_WITH_RSSI); } Anyway the bluetooth-next has been updated since last week so I first attempt to reproduce with a fresh clone of it since we did some fixups since then. -- Luiz Augusto von Dentz
