The DSDT for the Asus TF103C specifies a IOAPIC IRQ for the HCI -> host IRQ but this is not correct. Unlike the previous entries in the table, this time the correct GPIO to use instead is known; and the TF103C is battery powered making runtime-pm support more important. Extend the bcm_broken_irq_dmi_table mechanism to allow specifying the right GPIO instead of just always disabling runtime-pm and add an entry to it for the Asus TF103C. Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/bluetooth/hci_bcm.c | 44 ++++++++++++++++++++++++++++++------- 1 file changed, 36 insertions(+), 8 deletions(-) diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index ef54afa29357..c6ac4aa994af 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -20,6 +20,7 @@ #include <linux/regulator/consumer.h> #include <linux/clk.h> #include <linux/gpio/consumer.h> +#include <linux/gpio/machine.h> #include <linux/tty.h> #include <linux/interrupt.h> #include <linux/dmi.h> @@ -870,7 +871,23 @@ static int bcm_resume(struct device *dev) #endif /* Some firmware reports an IRQ which does not work (wrong pin in fw table?) */ +static struct gpiod_lookup_table asus_tf103c_irq_gpios = { + .dev_id = "serial0-0", + .table = { + GPIO_LOOKUP("INT33FC:02", 17, "host-wakeup-alt", GPIO_ACTIVE_HIGH), + { } + }, +}; + static const struct dmi_system_id bcm_broken_irq_dmi_table[] = { + { + .ident = "Asus TF103C", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "TF103C"), + }, + .driver_data = &asus_tf103c_irq_gpios, + }, { .ident = "Meegopad T08", .matches = { @@ -1027,7 +1044,8 @@ static struct clk *bcm_get_txco(struct device *dev) static int bcm_get_resources(struct bcm_device *dev) { - const struct dmi_system_id *dmi_id; + const struct dmi_system_id *broken_irq_dmi_id; + const char *irq_con_id = "host-wakeup"; int err; dev->name = dev_name(dev->dev); @@ -1083,23 +1101,33 @@ static int bcm_get_resources(struct bcm_device *dev) if (err) return err; + broken_irq_dmi_id = dmi_first_match(bcm_broken_irq_dmi_table); + if (broken_irq_dmi_id && broken_irq_dmi_id->driver_data) { + gpiod_add_lookup_table(broken_irq_dmi_id->driver_data); + irq_con_id = "host-wakeup-alt"; + dev->irq_active_low = false; + dev->irq = 0; + } + /* IRQ can be declared in ACPI table as Interrupt or GpioInt */ if (dev->irq <= 0) { struct gpio_desc *gpio; - gpio = devm_gpiod_get_optional(dev->dev, "host-wakeup", - GPIOD_IN); + gpio = devm_gpiod_get_optional(dev->dev, irq_con_id, GPIOD_IN); if (IS_ERR(gpio)) return PTR_ERR(gpio); dev->irq = gpiod_to_irq(gpio); } - dmi_id = dmi_first_match(bcm_broken_irq_dmi_table); - if (dmi_id) { - dev_info(dev->dev, "%s: Has a broken IRQ config, disabling IRQ support / runtime-pm\n", - dmi_id->ident); - dev->irq = 0; + if (broken_irq_dmi_id) { + if (broken_irq_dmi_id->driver_data) { + gpiod_remove_lookup_table(broken_irq_dmi_id->driver_data); + } else { + dev_info(dev->dev, "%s: Has a broken IRQ config, disabling IRQ support / runtime-pm\n", + broken_irq_dmi_id->ident); + dev->irq = 0; + } } dev_dbg(dev->dev, "BCM irq: %d\n", dev->irq); -- 2.33.1