Hi Marcel:
I modified the code as you required, could you help merge it ? thank
you.
regards.
tim
On 2021-11-16 12:48, tjiang@xxxxxxxxxxxxxx wrote:
The board ID should be split into two bytes.
The 1st byte is chip ID, and the 2nd byte is platform ID.
For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip ID.
we have several platforms, and platform IDs are continuously added.
We would not distinguish different chips if we get these mixed up.
Platform ID:
0x00 is for Mobile
0x01 is for X86
0x02 is for Automotive
0x03 is for Consumer electronic
Signed-off-by: Tim Jiang <tjiang@xxxxxxxxxxxxxx>
---
drivers/bluetooth/btusb.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 46d892bbde62..c2a48824ab1e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2883,7 +2883,8 @@ struct qca_version {
__le32 rom_version;
__le32 patch_version;
__le32 ram_version;
- __le16 board_id;
+ __u8 chip_id;
+ __u8 platform_id;
__le16 flag;
__u8 reserved[4];
} __packed;
@@ -3072,7 +3073,17 @@ static void btusb_generate_qca_nvm_name(char
*fwname, size_t max_size,
u16 flag = le16_to_cpu(ver->flag);
if (((flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
- u16 board_id = le16_to_cpu(ver->board_id);
+ /* The board_id should be split into two bytes
+ * The 1st byte is chip ID, and the 2nd byte is platform ID
+ * For example, board ID 0x010A, 0x01 is platform ID. 0x0A is chip
ID
+ * Currently we have several platforms, and platform IDs are
continuously added.
+ * Platform ID:
+ * 0x00 is for Mobile
+ * 0x01 is for X86
+ * 0x02 is for Automotive
+ * 0x03 is for Consumer electronic
+ */
+ u16 board_id = (ver->chip_id << 8) + ver->platform_id;
const char *variant;
switch (le32_to_cpu(ver->ram_version)) {
