Hi Luiz,
> This adds support for Set Privacy Mode when updating the resolving list
> when HCI_CONN_FLAG_DEVICE_PRIVACY so the controller shall use Device
> Mode for devices programmed in the resolving list, Device Mode is
> actually required when the remote device are not able to use RPA as
> otherwise the default mode is Network Privacy Mode in which only
> allows RPAs thus the controller would filter out advertisement using
> identity addresses for which there is an IRK.
>
> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
> ---
> include/net/bluetooth/hci.h | 10 ++++++
> include/net/bluetooth/hci_core.h | 1 +
> net/bluetooth/hci_event.c | 29 +++++++++++++++++
> net/bluetooth/hci_sync.c | 53 ++++++++++++++++++++++++++++----
> 4 files changed, 87 insertions(+), 6 deletions(-)
>
> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
> index 63065bc01b76..979da5179ff4 100644
> --- a/include/net/bluetooth/hci.h
> +++ b/include/net/bluetooth/hci.h
> @@ -1930,6 +1930,16 @@ struct hci_rp_le_read_transmit_power {
> __s8 max_le_tx_power;
> } __packed;
>
> +#define HCI_NETWORK_PRIVACY 0x00
> +#define HCI_DEVICE_PRIVACY 0x01
> +
> +#define HCI_OP_LE_SET_PRIVACY_MODE 0x204e
> +struct hci_cp_le_set_privacy_mode {
> + __u8 bdaddr_type;
> + bdaddr_t bdaddr;
> + __u8 mode;
> +} __packed;
> +
> #define HCI_OP_LE_READ_BUFFER_SIZE_V2 0x2060
> struct hci_rp_le_read_buffer_size_v2 {
> __u8 status;
> diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
> index 07d2d099dc2a..cb5684da3ed4 100644
> --- a/include/net/bluetooth/hci_core.h
> +++ b/include/net/bluetooth/hci_core.h
> @@ -758,6 +758,7 @@ struct hci_conn_params {
>
> struct hci_conn *conn;
> bool explicit_connect;
> + uint8_t privacy_mode;
actually u8 please.
> u32 current_flags;
> };
>
> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> index d4b75a6cfeee..9cadc543abcb 100644
> --- a/net/bluetooth/hci_event.c
> +++ b/net/bluetooth/hci_event.c
> @@ -1300,6 +1300,31 @@ static void hci_cc_le_read_transmit_power(struct hci_dev *hdev,
> hdev->max_le_tx_power = rp->max_le_tx_power;
> }
>
> +static void hci_cc_le_set_privacy_mode(struct hci_dev *hdev,
> + struct sk_buff *skb)
> +{
> + __u8 status = *((__u8 *)skb->data);
> + struct hci_cp_le_set_privacy_mode *cp;
> + struct hci_conn_params *params;
> +
> + bt_dev_dbg(hdev, "status 0x%2.2x", status);
> +
> + if (status)
> + return;
> +
> + cp = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_PRIVACY_MODE);
> + if (!cp)
> + return;
> +
> + hci_dev_lock(hdev);
> +
> + params = hci_conn_params_lookup(hdev, &cp->bdaddr, cp->bdaddr_type);
> + if (params)
> + params->privacy_mode = cp->mode;
> +
> + hci_dev_unlock(hdev);
> +}
> +
> static void hci_cc_le_set_adv_enable(struct hci_dev *hdev, struct sk_buff *skb)
> {
> __u8 *sent, status = *((__u8 *) skb->data);
> @@ -3812,6 +3837,10 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb,
> hci_cc_le_read_transmit_power(hdev, skb);
> break;
>
> + case HCI_OP_LE_SET_PRIVACY_MODE:
> + hci_cc_le_set_privacy_mode(hdev, skb);
> + break;
> +
> default:
> BT_DBG("%s opcode 0x%4.4x", hdev->name, *opcode);
> break;
> diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
> index b794605dc882..32ed7da3b6dd 100644
> --- a/net/bluetooth/hci_sync.c
> +++ b/net/bluetooth/hci_sync.c
> @@ -1580,8 +1580,42 @@ static int hci_le_add_resolve_list_sync(struct hci_dev *hdev,
> sizeof(cp), &cp, HCI_CMD_TIMEOUT);
> }
>
> +/* Set Device Privacy Mode. */
> +static int hci_le_set_privacy_mode_sync(struct hci_dev *hdev,
> + struct hci_conn_params *params)
> +{
> + struct hci_cp_le_set_privacy_mode cp;
> + struct smp_irk *irk;
> +
> + /* If device privacy mode has already been set there is nothing to do */
> + if (params->privacy_mode == HCI_DEVICE_PRIVACY)
> + return 0;
> +
> + /* Set Privacy Mode requires the use of resolving list (aka. LL Privacy)
> + * by default Network Mode is used so only really send the command if
> + * Device Mode is required (HCI_CONN_FLAG_DEVICE_PRIVACY).
> + */
> + if (!privacy_mode_capable(hdev) ||
> + !hci_conn_test_flag(HCI_CONN_FLAG_DEVICE_PRIVACY,
> + params->current_flags))
> + return 0;
> +
> + irk = hci_find_irk_by_addr(hdev, ¶ms->addr, params->addr_type);
> + if (!irk)
> + return 0;
> +
> + memset(&cp, 0, sizeof(cp));
> + cp.bdaddr_type = irk->addr_type;
> + bacpy(&cp.bdaddr, &irk->bdaddr);
> + cp.mode = HCI_DEVICE_PRIVACY;
> +
> + return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_PRIVACY_MODE,
> + sizeof(cp), &cp, HCI_CMD_TIMEOUT);
> +}
> +
> /* Adds connection to allow list if needed, if the device uses RPA (has IRK)
> - * this attempts to program the device in the resolving list as well.
> + * this attempts to program the device in the resolving list as well and
> + * properly set the privacy mode.
> */
> static int hci_le_add_accept_list_sync(struct hci_dev *hdev,
> struct hci_conn_params *params,
> @@ -1590,11 +1624,6 @@ static int hci_le_add_accept_list_sync(struct hci_dev *hdev,
> struct hci_cp_le_add_to_accept_list cp;
> int err;
>
> - /* Already in accept list */
> - if (hci_bdaddr_list_lookup(&hdev->le_accept_list, ¶ms->addr,
> - params->addr_type))
> - return 0;
> -
> /* Select filter policy to accept all advertising */
> if (*num_entries >= hdev->le_accept_list_size)
> return -ENOSPC;
> @@ -1620,6 +1649,18 @@ static int hci_le_add_accept_list_sync(struct hci_dev *hdev,
> return err;
> }
>
> + /* Set Privacy Mode */
> + err = hci_le_set_privacy_mode_sync(hdev, params);
> + if (err) {
> + bt_dev_err(hdev, "Unable to set privacy mode: %d", err);
> + return err;
> + }
> +
> + /* Check if already in accept list */
> + if (hci_bdaddr_list_lookup(&hdev->le_accept_list, ¶ms->addr,
> + params->addr_type))
> + return 0;
> +
> *num_entries += 1;
> cp.bdaddr_type = params->addr_type;
> bacpy(&cp.bdaddr, ¶ms->addr);
Regards
Marcel
