Re: [PATCH v3 1/2] Bluetooth: Ignore HCI_ERROR_CANCELLED_BY_HOST on adv set terminated event

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Archie,

> This event is received when the controller stops advertising,
> specifically for these three reasons:
> (a) Connection is successfully created (success).
> (b) Timeout is reached (error).
> (c) Number of advertising events is reached (error).
> (*) This event is NOT generated when the host stops the advertisement.
> Refer to the BT spec ver 5.3 vol 4 part E sec 7.7.65.18. Note that the
> section was revised from BT spec ver 5.0 vol 2 part E sec 7.7.65.18
> which was ambiguous about (*).
> 
> Some chips (e.g. RTL8822CE) send this event when the host stops the
> advertisement with status = HCI_ERROR_CANCELLED_BY_HOST (due to (*)
> above). This is treated as an error and the advertisement will be
> removed and userspace will be informed via MGMT event.
> 
> On suspend, we are supposed to temporarily disable advertisements,
> and continue advertising on resume. However, due to the behavior
> above, the advertisements are removed instead.
> 
> This patch returns early if HCI_ERROR_CANCELLED_BY_HOST is received.
> 
> Btmon snippet of the unexpected behavior:
> @ MGMT Command: Remove Advertising (0x003f) plen 1
>        Instance: 1
> < HCI Command: LE Set Extended Advertising Enable (0x08|0x0039) plen 6
>        Extended advertising: Disabled (0x00)
>        Number of sets: 1 (0x01)
>        Entry 0
>          Handle: 0x01
>          Duration: 0 ms (0x00)
>          Max ext adv events: 0
>> HCI Event: LE Meta Event (0x3e) plen 6
>      LE Advertising Set Terminated (0x12)
>        Status: Operation Cancelled by Host (0x44)
>        Handle: 1
>        Connection handle: 0
>        Number of completed extended advertising events: 5
>> HCI Event: Command Complete (0x0e) plen 4
>      LE Set Extended Advertising Enable (0x08|0x0039) ncmd 2
>        Status: Success (0x00)
> 
> Signed-off-by: Archie Pusaka <apusaka@xxxxxxxxxxxx>
> 
> ---
> 
> (no changes since v2)
> 
> Changes in v2:
> * Split clearing HCI_LE_ADV into its own patch
> * Reword comments
> 
> include/net/bluetooth/hci.h |  1 +
> net/bluetooth/hci_event.c   | 12 ++++++++++++
> 2 files changed, 13 insertions(+)

patch has been applied to bluetooth-next tree.

Regards

Marcel




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux