Re: [PATCH v1 3/3] Bluetooth: hci_qca: Add support for QTI bluetooth MAPLE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 11/2/2021 4:22 PM, Greg KH wrote:
> On Tue, Nov 02, 2021 at 03:53:33PM +0800, Zijun Hu wrote:
>>
>>
>> On 11/2/2021 3:35 PM, Greg KH wrote:
>>> On Tue, Nov 02, 2021 at 03:12:57PM +0800, Zijun Hu wrote:
>>>> From: Zijun Hu <quic_zijuhu@xxxxxxxxxxx>
>>>>
>>>> Add support for MAPLE integrated within SOC, it is mounted on
>>>> a virtual tty port and powered on/off via relevant IOCTL, neither
>>>> IBS nor RAMPATCH downloading is not required.
>>>>
>>>> Signed-off-by: Zijun Hu <quic_zijuhu@xxxxxxxxxxx>
>>>> ---
>>>>  drivers/bluetooth/btqca.c   | 13 ++++++++++++-
>>>>  drivers/bluetooth/btqca.h   | 13 +++++++++++++
>>>>  drivers/bluetooth/hci_qca.c | 47 ++++++++++++++++++++++++++++++++++++++++++++-
>>>>  3 files changed, 71 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>>>> index be04d74037d2..b83d2ecefe5d 100644
>>>> --- a/drivers/bluetooth/btqca.c
>>>> +++ b/drivers/bluetooth/btqca.c
>>>> @@ -255,6 +255,8 @@ static void qca_tlv_check_data(struct hci_dev *hdev,
>>>>  		BT_DBG("TLV Type\t\t : 0x%x", type_len & 0x000000ff);
>>>>  		BT_DBG("Length\t\t : %d bytes", length);
>>>>  
>>>> +		if (qca_is_maple(soc_type))
>>>> +			break;
>>>>  		idx = 0;
>>>>  		data = tlv->data;
>>>>  		while (idx < length) {
>>>> @@ -552,6 +554,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>>>>  	rom_ver = ((soc_ver & 0x00000f00) >> 0x04) | (soc_ver & 0x0000000f);
>>>>  
>>>>  	/* Download rampatch file */
>>>> +	if (qca_is_maple(soc_type))
>>>> +		goto download_nvm;
>>>> +
>>>>  	config.type = TLV_TYPE_PATCH;
>>>>  	if (qca_is_wcn399x(soc_type)) {
>>>>  		snprintf(config.fwname, sizeof(config.fwname),
>>>> @@ -580,6 +585,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>>>>  	/* Give the controller some time to get ready to receive the NVM */
>>>>  	msleep(10);
>>>>  
>>>> +download_nvm:
>>>>  	/* Download NVM configuration */
>>>>  	config.type = TLV_TYPE_NVM;
>>>>  	if (firmware_name)
>>>> @@ -597,6 +603,9 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>>>>  	else if (soc_type == QCA_QCA6390)
>>>>  		snprintf(config.fwname, sizeof(config.fwname),
>>>>  			 "qca/htnv%02x.bin", rom_ver);
>>>> +	else if (qca_is_maple(soc_type))
>>>> +		snprintf(config.fwname, sizeof(config.fwname),
>>>> +			 "qca/mpnv%02x.bin", rom_ver);
>>>>  	else if (soc_type == QCA_WCN6750)
>>>>  		snprintf(config.fwname, sizeof(config.fwname),
>>>>  			 "qca/msnv%02x.bin", rom_ver);
>>>> @@ -609,6 +618,8 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>>>>  		bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);
>>>>  		return err;
>>>>  	}
>>>> +	if (qca_is_maple(soc_type))
>>>> +		msleep(MAPLE_NVM_READY_DELAY_MS);
>>>>  
>>>>  	if (soc_type >= QCA_WCN3991) {
>>>>  		err = qca_disable_soc_logging(hdev);
>>>> @@ -637,7 +648,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>>>>  		return err;
>>>>  	}
>>>>  
>>>> -	if (soc_type == QCA_WCN3991 || soc_type == QCA_WCN6750) {
>>>> +	if (soc_type == QCA_WCN3991 || soc_type == QCA_WCN6750 || qca_is_maple(soc_type)) {
>>>>  		/* get fw build info */
>>>>  		err = qca_read_fw_build_info(hdev);
>>>>  		if (err < 0)
>>>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>>>> index 30afa7703afd..0a5a7d1daa71 100644
>>>> --- a/drivers/bluetooth/btqca.h
>>>> +++ b/drivers/bluetooth/btqca.h
>>>> @@ -46,6 +46,8 @@
>>>>  
>>>>  #define QCA_FW_BUILD_VER_LEN		255
>>>>  
>>>> +#define MAPLE_NVM_READY_DELAY_MS        1500
>>>> +#define MAPLE_POWER_CONTROL_DELAY_MS    50
>>>>  
>>>>  enum qca_baudrate {
>>>>  	QCA_BAUDRATE_115200 	= 0,
>>>> @@ -145,6 +147,7 @@ enum qca_btsoc_type {
>>>>  	QCA_WCN3991,
>>>>  	QCA_QCA6390,
>>>>  	QCA_WCN6750,
>>>> +	QCA_MAPLE,
>>>>  };
>>>>  
>>>>  #if IS_ENABLED(CONFIG_BT_QCA)
>>>> @@ -167,6 +170,11 @@ static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
>>>>  	return soc_type == QCA_WCN6750;
>>>>  }
>>>>  
>>>> +static inline bool qca_is_maple(enum qca_btsoc_type soc_type)
>>>> +{
>>>> +	return soc_type == QCA_MAPLE;
>>>> +}
>>>> +
>>>>  #else
>>>>  
>>>>  static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
>>>> @@ -204,6 +212,11 @@ static inline bool qca_is_wcn6750(enum qca_btsoc_type soc_type)
>>>>  	return false;
>>>>  }
>>>>  
>>>> +static inline bool qca_is_maple(enum qca_btsoc_type soc_type)
>>>> +{
>>>> +	return false;
>>>> +}
>>>> +
>>>>  static inline int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
>>>>  {
>>>>  	return -EOPNOTSUPP;
>>>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>>>> index dd768a8ed7cb..f1d9670719c4 100644
>>>> --- a/drivers/bluetooth/hci_qca.c
>>>> +++ b/drivers/bluetooth/hci_qca.c
>>>> @@ -70,6 +70,10 @@
>>>>  #define QCA_CRASHBYTE_PACKET_LEN	1096
>>>>  #define QCA_MEMDUMP_BYTE		0xFB
>>>>  
>>>> +#ifndef IOCTL_IPC_BOOT
>>>> +#define IOCTL_IPC_BOOT                  0xBE
>>>> +#endif
>>>
>>> You send this command, but never use it.  Where is the driver code that
>>> uses this command?
>>>
>> qca_maple_power_control() will use it.  this driver depends on bt_tty kernel module
>> https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/tree/drivers/soc/qcom/bt_tty.c?h=NHSS.QSDK.11.5.0.5.r2
> 
> You can not add code to the kernel that is not used by the kernel
> itself.  That driver needs to be in the tree as well, why is it not
> submitted now too?
> 
  the bt_tty driver module is not developed and maintained by me.
  bluetooth driver code of linux-ipq-5.4 stopped update at Sep 15 2019.
  many relevant changes need to be picked up from bluetooth-next if apply this patch int to linux-ipq-5.4

>>> And why not tabs?
>>>
>>> And why is this patch series not properly threaded so tools can pick it
>>> up and find them?
>>>
>>> And why the odd named ioctl that is different from other ones in this
>>> file?
>>>
>> that IOCTL name is defined by that module.
>> https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/tree/include/linux/bt.h?h=NHSS.QSDK.11.5.0.5.r2
> 
> Again, it needs to be in the tree.
> 
  make sense, i will try to submit this change to linux-ipq-5.4
>>> And why not just use normal power management hooks for doing things like
>>> turning on and off the hardware like all other drivers?
>>>
>> this device is special.
> 
> All drivers and devices are special and unique.  Just like all of them :)
> 
> What is so odd about this device that it can not work with the existing
> infrastructure that the kernel has for all of the hundreds of thousands
> of other devices it supports?
> 
UART is a standard BT H/W interface. so this change depends on bt_tty which
emulate a tty port. so this change use it.
 
>> it seems BT maintainer decides to drop this patch.
> 
> Of course, at the very least because there is no in-kernel user, why
> would you accept such a patch if you were the maintainer?
> 
> Please submit your driver first.
>
okay, make sense. thank you
 
> thanks,
> 
> greg k-h
> 



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux