Re: [PATCH] Bluetooth: hci_sync: Set Privacy Mode when updating the resolving list

[Marcel Holtmann <marcel@xxxxxxxxxxxx>]

Hi Luiz,

> This adds support for Set Privacy Mode when updating the resolving list
> when HCI_LIMITED_PRIVACY so the controller shall use Device Mode for
> devices programmed in the resolving list, Device Mode is actually
> required when the remote device are not able to use RPA as otherwise the
> default mode is Network Privacy Mode in which only RPA are allowed thus
> the controller would filter out advertisement using the identity address
> for which there is an IRK.
> 
> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
> ---
> include/net/bluetooth/hci.h |  7 ++++++
> net/bluetooth/hci_sync.c    | 48 ++++++++++++++++++++++++++++++++-----
> 2 files changed, 49 insertions(+), 6 deletions(-)
> 
> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
> index 63065bc01b76..aa856dfd5b9f 100644
> --- a/include/net/bluetooth/hci.h
> +++ b/include/net/bluetooth/hci.h
> @@ -1930,6 +1930,13 @@ struct hci_rp_le_read_transmit_power {
> 	__s8  max_le_tx_power;
> } __packed;
> 
> +#define HCI_OP_LE_SET_PRIVACY_MODE	0x204e
> +struct hci_cp_le_set_privacy_mode {
> +	__u8  bdaddr_type;
> +	bdaddr_t  bdaddr;
> +	__u8  mode;
> +} __packed;
> +
> #define HCI_OP_LE_READ_BUFFER_SIZE_V2	0x2060
> struct hci_rp_le_read_buffer_size_v2 {
> 	__u8    status;
> diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
> index b794605dc882..43173d645436 100644
> --- a/net/bluetooth/hci_sync.c
> +++ b/net/bluetooth/hci_sync.c
> @@ -1580,8 +1580,37 @@ static int hci_le_add_resolve_list_sync(struct hci_dev *hdev,
> 				     sizeof(cp), &cp, HCI_CMD_TIMEOUT);
> }
> 
> +/* Set Device Privacy Mode. */
> +static int hci_le_set_privacy_mode_sync(struct hci_dev *hdev,
> +					struct hci_conn_params *params)
> +{
> +	struct hci_cp_le_set_privacy_mode cp;
> +	struct smp_irk *irk;
> +
> +	/* Set Privacy Mode requires the use of resolving list (aka. LL Privacy)
> +	 * by default Network Mode is used so only really send the command if
> +	 * Device Mode is required (HCI_LIMITED_PRIVACY).
> +	 */
> +	if (!use_ll_privacy(hdev) ||
> +	    !hci_dev_test_flag(hdev, HCI_LIMITED_PRIVACY))
> +		return 0;
> +
> +	irk = hci_find_irk_by_addr(hdev, &params->addr, params->addr_type);
> +	if (!irk)
> +		return 0;
> +
> +	memset(&cp, 0, sizeof(cp));
> +	cp.bdaddr_type = irk->addr_type;
> +	bacpy(&cp.bdaddr, &irk->bdaddr);
> +	cp.mode = 0x01;
> +

you need to check if this command is actually supported.

I think the best option is to add it to Set Device Flags and let bluetoothd set it on a per device basis like it does with the wakeup flag.

Trying to tie it to the Limited Privacy mode seems weird. Since that is for discoverability and this is for outgoing connections.

Regards

Marcel