Re: [PATCH v1] serdev: Add interface serdev_device_ioctl

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Greg,

>>>>>> For serdev_device which is mounted at virtual tty port, tty ioctl()
>>>>>> maybe be used to make serdev_device ready to talk with tty port, so
>>>>>> add interface serdev_device_ioctl().
>>>>>> 
>>>>>> Signed-off-by: Zijun Hu <quic_zijuhu@xxxxxxxxxxx>
>>>>>> ---
>>>>>> drivers/tty/serdev/core.c           | 11 +++++++++++
>>>>>> drivers/tty/serdev/serdev-ttyport.c | 12 ++++++++++++
>>>>>> include/linux/serdev.h              |  9 +++++++++
>>>>>> 3 files changed, 32 insertions(+)
>>>>>> 
>>>>>> diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
>>>>>> index f1324fe99378..c0f6cd64716b 100644
>>>>>> --- a/drivers/tty/serdev/core.c
>>>>>> +++ b/drivers/tty/serdev/core.c
>>>>>> @@ -405,6 +405,17 @@ int serdev_device_set_tiocm(struct serdev_device *serdev, int set, int clear)
>>>>>> }
>>>>>> EXPORT_SYMBOL_GPL(serdev_device_set_tiocm);
>>>>>> 
>>>>>> +int serdev_device_ioctl(struct serdev_device *serdev, unsigned int cmd, unsigned long arg)
>>>>>> +{
>>>>>> +	struct serdev_controller *ctrl = serdev->ctrl;
>>>>>> +
>>>>>> +	if (!ctrl || !ctrl->ops->ioctl)
>>>>>> +		return -EOPNOTSUPP;
>>>>> 
>>>>> Wrong error for returning that an ioctl is not handled :(
>>>> checkpatch.pl always reports below WARNING when i use ENOTSUPP as present interfaces
>>>> do. so i change error code to EOPNOTSUPP.
>>>> 
>>>> #28: FILE: drivers/tty/serdev/core.c:412:
>>>> +               return -ENOTSUPP;
>>>> 
>>>> WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP
>>> 
>>> Both of them are not the correct error to return when an ioctl is not
>>> supported.
>>> 
>> is ENODEV okay?
> 
> No, -ENOTTY is the correct one as per the documentation, right?
> 
>>>>> Anyway, what in-tree driver needs this functionality?  Why does serdev
>>>>> need any ioctl commands?
>>>>> 
>>>> i am developing driver for a special bluetooth controller which is integrated within SOC,
>>>> and it does not connect with the BT HOST with UART as normal controller do, but it has very
>>>> similar features as the BT controller with UART I/F. it is mounted on a virtual serial port
>>>> driven by a tty driver developed. but it need to call tty ioctl to make the 
>>>> special BT controller ready to talk with tty port. so i add this interface.
>>> 
>>> Please submit this change when you submit your driver that uses it at
>>> the same time so we can review them all at once.  We do not add apis
>>> that are not used in the kernel tree.
>>> 
>> okay
>>>> as you known, the main purpose of ioctl is to achieve MISC and irregular control. so it is useful
>>>> for these irregular devices.
>>> 
>>> For tty devices, "custom" ioctls are not ok, use the standard tty
>>> commands and you should be fine for everything you need to do.
>>> 
>>> If not, then perhaps your design is incorrect?
>>> 
>> i just want to refer bt_ioctl within https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-ipq-5.4/tree/drivers/soc/qcom/bt_tty.c?h=NHSS.QSDK.11.5.0.5.r2
>> by serdev. so add this interface.
> 
> The 5.4 kernel is not relevant here, so I do not understand.
> 
>> are there any other good solution to advise?
> 
> Why not work with the bluetooth developers on this?

if this is just to have some hackish Bluetooth driver, then NAK from my side. Since we have serdev, we have no need for, or requirements for any ioctl anymore. If such thing is needed, it is a bad design.

Regards

Marcel




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux