Hi Max, > Add the new support ID(0x04c5, 0x165c) to usb_device_id table for > Realtek RTL8852A. > > The device info from /sys/kernel/debug/usb/devices as below. > > T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=04c5 ProdID=165c Rev= 0.00 > S: Manufacturer=Realtek > S: Product=Bluetooth Radio > S: SerialNumber=00e04c000001 > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > Signed-off-by: Max Chou <max.chou@xxxxxxxxxxx> > Reviewed-by: Christian Bauer <christian.bauer1.external@xxxxxxxxxxx> > --- > drivers/bluetooth/btusb.c | 2 ++ > 1 file changed, 2 insertions(+) patch has been applied to bluetooth-next tree. Regards Marcel
