[RFC] Bluetooth: Fix using address type from events

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>

Address types ADDR_LE_DEV_PUBLIC_RESOLVED and
ADDR_LE_DEV_RANDOM_RESOLVED shall be converted to ADDR_LE_PUBLIC and
ADDR_LE_RANDOM repectively since they are not safe to be used beyond
the scope of the events themselves.

Also don't connect using RPA as peer address when LL Privacy is
enabled since the controller will be resolving the addresses it should
be able to generate the RPA.

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx>
---
 net/bluetooth/hci_conn.c  | 10 +++++---
 net/bluetooth/hci_core.c  |  9 -------
 net/bluetooth/hci_event.c | 52 ++++++++++++++++++---------------------
 3 files changed, 30 insertions(+), 41 deletions(-)

diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index bdaa64cb2f3a..28f23654b8a6 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -1087,10 +1087,12 @@ struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
 	 * be resolved back into the original identity address
 	 * from the connect request.
 	 */
-	irk = hci_find_irk_by_addr(hdev, dst, dst_type);
-	if (irk && bacmp(&irk->rpa, BDADDR_ANY)) {
-		dst = &irk->rpa;
-		dst_type = ADDR_LE_DEV_RANDOM;
+	if (!hci_dev_test_flag(hdev, HCI_LL_RPA_RESOLUTION)) {
+		irk = hci_find_irk_by_addr(hdev, dst, dst_type);
+		if (irk && bacmp(&irk->rpa, BDADDR_ANY)) {
+			dst = &irk->rpa;
+			dst_type = ADDR_LE_DEV_RANDOM;
+		}
 	}
 
 	if (conn) {
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 6ab0ff3cd4bc..e83a3accfc33 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3562,15 +3562,6 @@ struct hci_conn_params *hci_pend_le_action_lookup(struct list_head *list,
 {
 	struct hci_conn_params *param;
 
-	switch (addr_type) {
-	case ADDR_LE_DEV_PUBLIC_RESOLVED:
-		addr_type = ADDR_LE_DEV_PUBLIC;
-		break;
-	case ADDR_LE_DEV_RANDOM_RESOLVED:
-		addr_type = ADDR_LE_DEV_RANDOM;
-		break;
-	}
-
 	list_for_each_entry(param, list, action) {
 		if (bacmp(&param->addr, addr) == 0 &&
 		    param->addr_type == addr_type)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 24d0773b861a..028cdf7ef075 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -2411,6 +2411,24 @@ static void hci_cs_disconnect(struct hci_dev *hdev, u8 status)
 	hci_dev_unlock(hdev);
 }
 
+static u8 ev_bdaddr_type(struct hci_dev *hdev, u8 type)
+{
+	/* When using controller based address resolution, then the new
+	 * address types 0x02 and 0x03 are used. These types need to be
+	 * converted back into either public address or random address type
+	 */
+	if (hci_dev_test_flag(hdev, HCI_LL_RPA_RESOLUTION)) {
+		switch (type) {
+		case ADDR_LE_DEV_PUBLIC_RESOLVED:
+			return ADDR_LE_DEV_PUBLIC;
+		case ADDR_LE_DEV_RANDOM_RESOLVED:
+			return ADDR_LE_DEV_RANDOM;
+		}
+	}
+
+	return type;
+}
+
 static void cs_le_create_conn(struct hci_dev *hdev, bdaddr_t *peer_addr,
 			      u8 peer_addr_type, u8 own_address_type,
 			      u8 filter_policy)
@@ -2422,20 +2440,7 @@ static void cs_le_create_conn(struct hci_dev *hdev, bdaddr_t *peer_addr,
 	if (!conn)
 		return;
 
-	/* When using controller based address resolution, then the new
-	 * address types 0x02 and 0x03 are used. These types need to be
-	 * converted back into either public address or random address type
-	 */
-	if (hci_dev_test_flag(hdev, HCI_LL_RPA_RESOLUTION)) {
-		switch (own_address_type) {
-		case ADDR_LE_DEV_PUBLIC_RESOLVED:
-			own_address_type = ADDR_LE_DEV_PUBLIC;
-			break;
-		case ADDR_LE_DEV_RANDOM_RESOLVED:
-			own_address_type = ADDR_LE_DEV_RANDOM;
-			break;
-		}
-	}
+	own_address_type = ev_bdaddr_type(hdev, own_address_type);
 
 	/* Store the initiator and responder address information which
 	 * is needed for SMP. These values will not change during the
@@ -5333,20 +5338,7 @@ static void le_conn_complete_evt(struct hci_dev *hdev, u8 status,
 		conn->dst_type = irk->addr_type;
 	}
 
-	/* When using controller based address resolution, then the new
-	 * address types 0x02 and 0x03 are used. These types need to be
-	 * converted back into either public address or random address type
-	 */
-	if (hci_dev_test_flag(hdev, HCI_LL_RPA_RESOLUTION)) {
-		switch (conn->dst_type) {
-		case ADDR_LE_DEV_PUBLIC_RESOLVED:
-			conn->dst_type = ADDR_LE_DEV_PUBLIC;
-			break;
-		case ADDR_LE_DEV_RANDOM_RESOLVED:
-			conn->dst_type = ADDR_LE_DEV_RANDOM;
-			break;
-		}
-	}
+	conn->dst_type = ev_bdaddr_type(hdev, conn->dst_type);
 
 	if (status) {
 		hci_le_conn_failed(conn, status);
@@ -5663,6 +5655,8 @@ static void process_adv_report(struct hci_dev *hdev, u8 type, bdaddr_t *bdaddr,
 	 * controller address.
 	 */
 	if (direct_addr) {
+		direct_addr_type = ev_bdaddr_type(hdev, direct_addr_type);
+
 		/* Only resolvable random addresses are valid for these
 		 * kind of reports and others can be ignored.
 		 */
@@ -5690,6 +5684,8 @@ static void process_adv_report(struct hci_dev *hdev, u8 type, bdaddr_t *bdaddr,
 		bdaddr_type = irk->addr_type;
 	}
 
+	bdaddr_type = ev_bdaddr_type(hdev, bdaddr_type);
+
 	/* Check if we have been requested to connect to this device.
 	 *
 	 * direct_addr is set only for directed advertising reports (it is NULL
-- 
2.31.1




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux