[RFC PATCH 06/15] Bluetooth: hci_qca: merge init paths

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

The hci_qca driver has almost identical init paths. Merge them together
to remove duplication in preparation to adding power sequencer support.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/bluetooth/hci_qca.c | 76 ++++++++++++++++---------------------
 1 file changed, 33 insertions(+), 43 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index a21cec44720a..279b802f0952 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -2020,11 +2020,12 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	if (!qcadev->oper_speed)
 		BT_DBG("UART will pick default operating speed");
 
-	if (data &&
-	    (qca_is_wcn399x(data->soc_type) ||
-	    qca_is_wcn6750(data->soc_type))) {
+	if (data)
 		qcadev->btsoc_type = data->soc_type;
+	else
+		qcadev->btsoc_type = QCA_ROME;
 
+	if (data && data->num_vregs) {
 		err = qca_init_regulators(qcadev, &serdev->dev, data->vregs,
 					  data->num_vregs);
 		if (err) {
@@ -2033,48 +2034,33 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 		}
 
 		qcadev->vregs_on = false;
+	}
 
-		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
-					       GPIOD_OUT_LOW);
-		if (!qcadev->bt_en && data->soc_type == QCA_WCN6750) {
+	qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
+			GPIOD_OUT_LOW);
+	if (!qcadev->bt_en) {
+		if (qca_is_wcn6750(data->soc_type)) {
 			dev_err(&serdev->dev, "failed to acquire BT_EN gpio\n");
 			power_ctrl_enabled = false;
-		}
-
-		qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
-					       GPIOD_IN);
-		if (!qcadev->sw_ctrl && data->soc_type == QCA_WCN6750)
-			dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
-
-		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
-		if (IS_ERR(qcadev->susclk)) {
-			dev_err(&serdev->dev, "failed to acquire clk\n");
-			return PTR_ERR(qcadev->susclk);
-		}
-
-		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
-		if (err) {
-			BT_ERR("wcn3990 serdev registration failed");
-			return err;
-		}
-	} else {
-		if (data)
-			qcadev->btsoc_type = data->soc_type;
-		else
-			qcadev->btsoc_type = QCA_ROME;
-
-		qcadev->bt_en = devm_gpiod_get_optional(&serdev->dev, "enable",
-					       GPIOD_OUT_LOW);
-		if (!qcadev->bt_en) {
+		} else if (!qca_is_wcn399x(data->soc_type)) {
 			dev_warn(&serdev->dev, "failed to acquire enable gpio\n");
 			power_ctrl_enabled = false;
 		}
+	}
 
-		qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
-		if (IS_ERR(qcadev->susclk)) {
-			dev_warn(&serdev->dev, "failed to acquire clk\n");
-			return PTR_ERR(qcadev->susclk);
-		}
+	qcadev->sw_ctrl = devm_gpiod_get_optional(&serdev->dev, "swctrl",
+			GPIOD_IN);
+	if (!qcadev->sw_ctrl && qca_is_wcn6750(data->soc_type))
+		dev_warn(&serdev->dev, "failed to acquire SW_CTRL gpio\n");
+
+	qcadev->susclk = devm_clk_get_optional(&serdev->dev, NULL);
+	if (IS_ERR(qcadev->susclk)) {
+		dev_err(&serdev->dev, "failed to acquire clk\n");
+		return PTR_ERR(qcadev->susclk);
+	}
+
+	if (!qca_is_wcn399x(data->soc_type) &&
+	    !qca_is_wcn6750(data->soc_type)) {
 		err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
 		if (err)
 			return err;
@@ -2082,13 +2068,17 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 		err = clk_prepare_enable(qcadev->susclk);
 		if (err)
 			return err;
+	}
 
-		err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
-		if (err) {
-			BT_ERR("Rome serdev registration failed");
+	err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
+	if (err) {
+		BT_ERR("QCA serdev registration failed");
+
+		if (!qca_is_wcn399x(data->soc_type) &&
+		    !qca_is_wcn6750(data->soc_type))
 			clk_disable_unprepare(qcadev->susclk);
-			return err;
-		}
+
+		return err;
 	}
 
 	hdev = qcadev->serdev_hu.hdev;
-- 
2.30.2