Re: [PATCH v7 3/4] Bluetooth: set quality report callback for Intel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Joseph,

On Thu, Aug 12, 2021 at 2:16 AM Joseph Hwang <josephsih@xxxxxxxxxxxx> wrote:
>
> This patch sets up set_quality_report callback for Intel to
> set and reset the debug features.
>
> Reviewed-by: Miao-chen Chou <mcchou@xxxxxxxxxxxx>
> Signed-off-by: Joseph Hwang <josephsih@xxxxxxxxxxxx>
> ---
>
> Changes in v7:
> - Rebase on Tedd's patches that moved functionality from btusb to
>   btintel.
>
> Changes in v5:
> - Removed CONFIG_BT_FEATURE_QUALITY_REPORT since there was no
>   large size impact.
>
>  drivers/bluetooth/btintel.c | 81 ++++++++++++++++++++++++++++++++++++-
>  drivers/bluetooth/btintel.h |  6 +++
>  2 files changed, 86 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
> index 643e2194ca01..611c3ea5425f 100644
> --- a/drivers/bluetooth/btintel.c
> +++ b/drivers/bluetooth/btintel.c
> @@ -1291,8 +1291,10 @@ static int btintel_set_debug_features(struct hci_dev *hdev,
>         u8 trace_enable = 0x02;
>         struct sk_buff *skb;
>
> -       if (!features)
> +       if (!features) {
> +               bt_dev_warn(hdev, "Debug features not read");
>                 return -EINVAL;
> +       }
>
>         if (!(features->page1[0] & 0x3f)) {
>                 bt_dev_info(hdev, "Telemetry exception format not supported");
> @@ -1323,9 +1325,77 @@ static int btintel_set_debug_features(struct hci_dev *hdev,
>         }
>         kfree_skb(skb);
>
> +       bt_dev_info(hdev, "set debug features: trace_enable 0x%02x mask 0x%02x",
> +                   trace_enable, mask[3]);
> +
>         return 0;
>  }
>
> +static int btintel_reset_debug_features(struct hci_dev *hdev,
> +                                const struct intel_debug_features *features)
> +{
> +       u8 mask[11] = { 0x0a, 0x92, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
> +                       0x00, 0x00, 0x00 };
> +       u8 trace_enable = 0x00;
> +       struct sk_buff *skb;
> +
> +       if (!features) {
> +               bt_dev_warn(hdev, "Debug features not read");
> +               return -EINVAL;
> +       }
> +
> +       if (!(features->page1[0] & 0x3f)) {
> +               bt_dev_info(hdev, "Telemetry exception format not supported");
> +               return 0;
> +       }
> +
> +       /* Should stop the trace before writing ddc event mask. */
> +       skb = __hci_cmd_sync(hdev, 0xfca1, 1, &trace_enable, HCI_INIT_TIMEOUT);
> +       if (IS_ERR(skb)) {
> +               bt_dev_err(hdev, "Stop tracing of link statistics events failed (%ld)",
> +                          PTR_ERR(skb));
> +               return PTR_ERR(skb);
> +       }
> +       kfree_skb(skb);
> +
> +       skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT);
> +       if (IS_ERR(skb)) {
> +               bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)",
> +                          PTR_ERR(skb));
> +               return PTR_ERR(skb);
> +       }
> +       kfree_skb(skb);
> +
> +       bt_dev_info(hdev, "reset debug features: trace_enable 0x%02x mask 0x%02x",
> +                   trace_enable, mask[3]);
> +
> +       return 0;
> +}
> +
> +int btintel_set_quality_report(struct hci_dev *hdev, bool enable)
> +{
> +       struct intel_debug_features features;
> +       int err;
> +
> +       bt_dev_dbg(hdev, "enable %d", enable);
> +
> +       /* Read the Intel supported features and if new exception formats
> +        * supported, need to load the additional DDC config to enable.
> +        */
> +       err = btintel_read_debug_features(hdev, &features);
> +       if (err)
> +               return err;
> +
> +       /* Set or reset the debug features. */
> +       if (enable)
> +               err = btintel_set_debug_features(hdev, &features);
> +       else
> +               err = btintel_reset_debug_features(hdev, &features);
> +
> +       return err;
> +}
> +EXPORT_SYMBOL_GPL(btintel_set_quality_report);
> +
>  static const struct firmware *btintel_legacy_rom_get_fw(struct hci_dev *hdev,
>                                                struct intel_version *ver)
>  {
> @@ -1951,6 +2021,9 @@ static int btintel_bootloader_setup(struct hci_dev *hdev,
>                 btintel_load_ddc_config(hdev, ddcname);
>         }
>
> +       hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT);
> +       bt_dev_dbg(hdev, "HCI_QUALITY_REPORT cleared");

I would remove such debugs since I don't think they have any value
here, besides it doesn't seem HCI_QUALITY_REPORT is ever set anyway
which perhaps should be done by the core itself after calling the
callback.

>         /* Read the Intel version information after loading the FW  */
>         err = btintel_read_version(hdev, &new_ver);
>         if (err)
> @@ -2132,6 +2205,9 @@ static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,
>          */
>         btintel_load_ddc_config(hdev, ddcname);
>
> +       hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT);
> +       bt_dev_dbg(hdev, "HCI_QUALITY_REPORT cleared");

Ditto.

>         /* Read the Intel version information after loading the FW  */
>         err = btintel_read_version_tlv(hdev, &new_ver);
>         if (err)
> @@ -2230,6 +2306,9 @@ static int btintel_setup_combined(struct hci_dev *hdev)
>         set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
>         set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
>
> +       /* Set up the quality report callback for Intel devices */
> +       hdev->set_quality_report = btintel_set_quality_report;
> +
>         /* For Legacy device, check the HW platform value and size */
>         if (skb->len == sizeof(ver) && skb->data[1] == 0x37) {
>                 bt_dev_dbg(hdev, "Read the legacy Intel version information");
> diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
> index aa64072bbe68..fe02cb9ac96c 100644
> --- a/drivers/bluetooth/btintel.h
> +++ b/drivers/bluetooth/btintel.h
> @@ -204,6 +204,7 @@ int btintel_configure_setup(struct hci_dev *hdev);
>  void btintel_bootup(struct hci_dev *hdev, const void *ptr, unsigned int len);
>  void btintel_secure_send_result(struct hci_dev *hdev,
>                                 const void *ptr, unsigned int len);
> +int btintel_set_quality_report(struct hci_dev *hdev, bool enable);
>  #else
>
>  static inline int btintel_check_bdaddr(struct hci_dev *hdev)
> @@ -294,4 +295,9 @@ static inline void btintel_secure_send_result(struct hci_dev *hdev,
>                                 const void *ptr, unsigned int len)
>  {
>  }
> +
> +static inline int btintel_set_quality_report(struct hci_dev *hdev, bool enable)
> +{
> +       return -ENODEV;
> +}
>  #endif
> --
> 2.32.0.605.g8dce9f2422-goog
>


-- 
Luiz Augusto von Dentz



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux