From: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
>From the ThP, it supports both legacy and TLV based HCI_Intel_Read_Version
command after downloading the operational firmware, and it causes the
driver to choose the wrong setup routines and missing firmware/ddc file.
So, as a workaround, this patch checks the fw variant from the TLV based
version, and if the device is legacy bootloader device, the legacy
HCI_Intel_Read_Version command is used to get the legacy version
information and run the legacy bootloader setup with it.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
---
drivers/bluetooth/btintel.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index 4f0ba6031c57..2941d33d0bc2 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -2312,6 +2312,27 @@ static int btintel_setup_combined(struct hci_dev *hdev)
* along.
*/
switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) {
+ case 0x11: /* JfP */
+ case 0x12: /* ThP */
+ case 0x13: /* HrP */
+ case 0x14: /* CcP */
+ /* Some legacy bootloader devices from JfP supports both old
+ * and TLV based HCI_Intel_Read_Version command. But we don't
+ * want to use the TLV based setup routines for those legacy
+ * bootloader device.
+ *
+ * Also, it is not easy to convert TLV based version from the
+ * legacy version format.
+ *
+ * So, as a workaround for those devices, use the legacy
+ * HCI_Intel_Read_Version to get the version information and
+ * run the legacy bootloader setup.
+ */
+ err = btintel_read_version(hdev, &ver);
+ if (err)
+ return err;
+ err = btintel_bootloader_setup(hdev, &ver);
+ break;
case 0x17:
case 0x18:
case 0x19:
--
2.25.1
