From: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx> This patch refactors the setup routines for legacy and TLV based bootloader devices to the combined setup, and move the related functions from btusb to btintel. Signed-off-by: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx> --- drivers/bluetooth/btintel.c | 719 ++++++++++++++++++++++++++++++----- drivers/bluetooth/btintel.h | 25 +- drivers/bluetooth/btusb.c | 737 +----------------------------------- 3 files changed, 658 insertions(+), 823 deletions(-) diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c index 31f68530323f..5acf3c8e703b 100644 --- a/drivers/bluetooth/btintel.c +++ b/drivers/bluetooth/btintel.c @@ -630,90 +630,7 @@ int btintel_read_version_tlv(struct hci_dev *hdev, struct intel_version_tlv *ver return -EIO; } - /* Consume Command Complete Status field */ - skb_pull(skb, 1); - - /* Event parameters contatin multiple TLVs. Read each of them - * and only keep the required data. Also, it use existing legacy - * version field like hw_platform, hw_variant, and fw_variant - * to keep the existing setup flow - */ - while (skb->len) { - struct intel_tlv *tlv; - - tlv = (struct intel_tlv *)skb->data; - switch (tlv->type) { - case INTEL_TLV_CNVI_TOP: - version->cnvi_top = get_unaligned_le32(tlv->val); - break; - case INTEL_TLV_CNVR_TOP: - version->cnvr_top = get_unaligned_le32(tlv->val); - break; - case INTEL_TLV_CNVI_BT: - version->cnvi_bt = get_unaligned_le32(tlv->val); - break; - case INTEL_TLV_CNVR_BT: - version->cnvr_bt = get_unaligned_le32(tlv->val); - break; - case INTEL_TLV_DEV_REV_ID: - version->dev_rev_id = get_unaligned_le16(tlv->val); - break; - case INTEL_TLV_IMAGE_TYPE: - version->img_type = tlv->val[0]; - break; - case INTEL_TLV_TIME_STAMP: - /* If image type is Operational firmware (0x03), then - * running FW Calendar Week and Year information can - * be extracted from Timestamp information - */ - version->min_fw_build_cw = tlv->val[0]; - version->min_fw_build_yy = tlv->val[1]; - version->timestamp = get_unaligned_le16(tlv->val); - break; - case INTEL_TLV_BUILD_TYPE: - version->build_type = tlv->val[0]; - break; - case INTEL_TLV_BUILD_NUM: - /* If image type is Operational firmware (0x03), then - * running FW build number can be extracted from the - * Build information - */ - version->min_fw_build_nn = tlv->val[0]; - version->build_num = get_unaligned_le32(tlv->val); - break; - case INTEL_TLV_SECURE_BOOT: - version->secure_boot = tlv->val[0]; - break; - case INTEL_TLV_OTP_LOCK: - version->otp_lock = tlv->val[0]; - break; - case INTEL_TLV_API_LOCK: - version->api_lock = tlv->val[0]; - break; - case INTEL_TLV_DEBUG_LOCK: - version->debug_lock = tlv->val[0]; - break; - case INTEL_TLV_MIN_FW: - version->min_fw_build_nn = tlv->val[0]; - version->min_fw_build_cw = tlv->val[1]; - version->min_fw_build_yy = tlv->val[2]; - break; - case INTEL_TLV_LIMITED_CCE: - version->limited_cce = tlv->val[0]; - break; - case INTEL_TLV_SBE_TYPE: - version->sbe_type = tlv->val[0]; - break; - case INTEL_TLV_OTP_BDADDR: - memcpy(&version->otp_bd_addr, tlv->val, tlv->len); - break; - default: - /* Ignore rest of information */ - break; - } - /* consume the current tlv and move to next*/ - skb_pull(skb, tlv->len + sizeof(*tlv)); - } + btintel_parse_version_tlv(hdev, version, skb); kfree_skb(skb); return 0; @@ -1191,10 +1108,10 @@ int btintel_download_firmware(struct hci_dev *hdev, } EXPORT_SYMBOL_GPL(btintel_download_firmware); -int btintel_download_firmware_newgen(struct hci_dev *hdev, - struct intel_version_tlv *ver, - const struct firmware *fw, u32 *boot_param, - u8 hw_variant, u8 sbe_type) +static int btintel_download_fw_tlv(struct hci_dev *hdev, + struct intel_version_tlv *ver, + const struct firmware *fw, u32 *boot_param, + u8 hw_variant, u8 sbe_type) { int err; u32 css_header_ver; @@ -1291,7 +1208,6 @@ int btintel_download_firmware_newgen(struct hci_dev *hdev, } return 0; } -EXPORT_SYMBOL_GPL(btintel_download_firmware_newgen); void btintel_reset_to_bootloader(struct hci_dev *hdev) { @@ -1682,6 +1598,579 @@ static int btintel_legacy_rom_setup(struct hci_dev *hdev, return 0; } +static int btintel_download_wait(struct hci_dev *hdev, ktime_t calltime, int msec) +{ + ktime_t delta, rettime; + unsigned long long duration; + int err; + + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + + bt_dev_info(hdev, "Waiting for firmware download to complete"); + + err = btintel_wait_on_flag_timeout(hdev, INTEL_DOWNLOADING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(msec)); + if (err == -EINTR) { + bt_dev_err(hdev, "Firmware loading interrupted"); + return err; + } + + if (err) { + bt_dev_err(hdev, "Firmware loading timeout"); + return -ETIMEDOUT; + } + + if (btintel_test_flag(hdev, INTEL_FIRMWARE_FAILED)) { + bt_dev_err(hdev, "Firmware loading failed"); + return -ENOEXEC; + } + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long)ktime_to_ns(delta) >> 10; + + bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration); + + return 0; +} + +static int btintel_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec) +{ + ktime_t delta, rettime; + unsigned long long duration; + int err; + + bt_dev_info(hdev, "Waiting for device to boot"); + + err = btintel_wait_on_flag_timeout(hdev, INTEL_BOOTING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(msec)); + if (err == -EINTR) { + bt_dev_err(hdev, "Device boot interrupted"); + return -EINTR; + } + + if (err) { + bt_dev_err(hdev, "Device boot timeout"); + return -ETIMEDOUT; + } + + rettime = ktime_get(); + delta = ktime_sub(rettime, calltime); + duration = (unsigned long long) ktime_to_ns(delta) >> 10; + + bt_dev_info(hdev, "Device booted in %llu usecs", duration); + + return 0; +} + +static int btintel_boot(struct hci_dev *hdev, u32 boot_addr) +{ + ktime_t calltime; + int err; + + calltime = ktime_get(); + + btintel_set_flag(hdev, INTEL_BOOTING); + + err = btintel_send_intel_reset(hdev, boot_addr); + if (err) { + bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err); + btintel_reset_to_bootloader(hdev); + return err; + } + + /* The bootloader will not indicate when the device is ready. This + * is done by the operational firmware sending bootup notification. + * + * Booting into operational firmware should not take longer than + * 1 second. However if that happens, then just fail the setup + * since something went wrong. + */ + err = btintel_boot_wait(hdev, calltime, 1000); + if (err == -ETIMEDOUT) + btintel_reset_to_bootloader(hdev); + + return err; +} + +static int btintel_get_fw_name(struct intel_version *ver, + struct intel_boot_params *params, + char *fw_name, size_t len, + const char *suffix) +{ + switch (ver->hw_variant) { + case 0x0b: /* SfP */ + case 0x0c: /* WsP */ + snprintf(fw_name, len, "intel/ibt-%u-%u.%s", + le16_to_cpu(ver->hw_variant), + le16_to_cpu(params->dev_revid), + suffix); + break; + case 0x11: /* JfP */ + case 0x12: /* ThP */ + case 0x13: /* HrP */ + case 0x14: /* CcP */ + snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s", + le16_to_cpu(ver->hw_variant), + le16_to_cpu(ver->hw_revision), + le16_to_cpu(ver->fw_revision), + suffix); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int btintel_download_fw(struct hci_dev *hdev, + struct intel_version *ver, + struct intel_boot_params *params, + u32 *boot_param) +{ + const struct firmware *fw; + char fwname[64]; + int err; + ktime_t calltime; + + if (!ver || !params) + return -EINVAL; + + /* The firmware variant determines if the device is in bootloader + * mode or is running operational firmware. The value 0x06 identifies + * the bootloader and the value 0x23 identifies the operational + * firmware. + * + * When the operational firmware is already present, then only + * the check for valid Bluetooth device address is needed. This + * determines if the device will be added as configured or + * unconfigured controller. + * + * It is not possible to use the Secure Boot Parameters in this + * case since that command is only available in bootloader mode. + */ + if (ver->fw_variant == 0x23) { + btintel_clear_flag(hdev, INTEL_BOOTLOADER); + btintel_check_bdaddr(hdev); + + /* SfP and WsP don't seem to update the firmware version on file + * so version checking is currently possible. + */ + switch (ver->hw_variant) { + case 0x0b: /* SfP */ + case 0x0c: /* WsP */ + return 0; + } + + /* Proceed to download to check if the version matches */ + goto download; + } + + /* Read the secure boot parameters to identify the operating + * details of the bootloader. + */ + err = btintel_read_boot_params(hdev, params); + if (err) + return err; + + /* It is required that every single firmware fragment is acknowledged + * with a command complete event. If the boot parameters indicate + * that this bootloader does not send them, then abort the setup. + */ + if (params->limited_cce != 0x00) { + bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)", + params->limited_cce); + return -EINVAL; + } + + /* If the OTP has no valid Bluetooth device address, then there will + * also be no valid address for the operational firmware. + */ + if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) { + bt_dev_info(hdev, "No device address configured"); + set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); + } + +download: + /* With this Intel bootloader only the hardware variant and device + * revision information are used to select the right firmware for SfP + * and WsP. + * + * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi. + * + * Currently the supported hardware variants are: + * 11 (0x0b) for iBT3.0 (LnP/SfP) + * 12 (0x0c) for iBT3.5 (WsP) + * + * For ThP/JfP and for future SKU's, the FW name varies based on HW + * variant, HW revision and FW revision, as these are dependent on CNVi + * and RF Combination. + * + * 17 (0x11) for iBT3.5 (JfP) + * 18 (0x12) for iBT3.5 (ThP) + * + * The firmware file name for these will be + * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi. + * + */ + err = btintel_get_fw_name(ver, params, fwname, sizeof(fwname), "sfi"); + if (err < 0) { + if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + return 0; + } + + bt_dev_err(hdev, "Unsupported Intel firmware naming"); + return -EINVAL; + } + + err = firmware_request_nowarn(&fw, fwname, &hdev->dev); + if (err < 0) { + if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + return 0; + } + + bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)", + fwname, err); + return err; + } + + bt_dev_info(hdev, "Found device firmware: %s", fwname); + + if (fw->size < 644) { + bt_dev_err(hdev, "Invalid size of firmware file (%zu)", + fw->size); + err = -EBADF; + goto done; + } + + calltime = ktime_get(); + + btintel_set_flag(hdev, INTEL_DOWNLOADING); + + /* Start firmware downloading and get boot parameter */ + err = btintel_download_firmware(hdev, ver, fw, boot_param); + if (err < 0) { + if (err == -EALREADY) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + err = 0; + goto done; + } + + /* When FW download fails, send Intel Reset to retry + * FW download. + */ + btintel_reset_to_bootloader(hdev); + goto done; + } + + /* Before switching the device into operational mode and with that + * booting the loaded firmware, wait for the bootloader notification + * that all fragments have been successfully received. + * + * When the event processing receives the notification, then the + * INTEL_DOWNLOADING flag will be cleared. + * + * The firmware loading should not take longer than 5 seconds + * and thus just timeout if that happens and fail the setup + * of this device. + */ + err = btintel_download_wait(hdev, calltime, 5000); + if (err == -ETIMEDOUT) + btintel_reset_to_bootloader(hdev); + +done: + release_firmware(fw); + return err; +} + +static int btintel_bootloader_setup(struct hci_dev *hdev, + struct intel_version *ver) +{ + struct intel_version new_ver; + struct intel_boot_params params; + u32 boot_param; + char ddcname[64]; + int err; + struct intel_debug_features features; + + BT_DBG("%s", hdev->name); + + /* Set the default boot parameter to 0x0 and it is updated to + * SKU specific boot parameter after reading Intel_Write_Boot_Params + * command while downloading the firmware. + */ + boot_param = 0x00000000; + + btintel_set_flag(hdev, INTEL_BOOTLOADER); + + err = btintel_download_fw(hdev, ver, ¶ms, &boot_param); + if (err) + return err; + + /* controller is already having an operational firmware */ + if (ver->fw_variant == 0x23) + goto finish; + + err = btintel_boot(hdev, boot_param); + if (err) + return err; + + btintel_clear_flag(hdev, INTEL_BOOTLOADER); + + err = btintel_get_fw_name(ver, ¶ms, ddcname, + sizeof(ddcname), "ddc"); + + if (err < 0) { + bt_dev_err(hdev, "Unsupported Intel firmware naming"); + } else { + /* Once the device is running in operational mode, it needs to + * apply the device configuration (DDC) parameters. + * + * The device can work without DDC parameters, so even if it + * fails to load the file, no need to fail the setup. + */ + btintel_load_ddc_config(hdev, ddcname); + } + + /* Read the Intel supported features and if new exception formats + * supported, need to load the additional DDC config to enable. + */ + err = btintel_read_debug_features(hdev, &features); + if (!err) { + /* Set DDC mask for available debug features */ + btintel_set_debug_features(hdev, &features); + } + + /* Read the Intel version information after loading the FW */ + err = btintel_read_version(hdev, &new_ver); + if (err) + return err; + + btintel_version_info(hdev, &new_ver); + +finish: + /* All Intel controllers that support the Microsoft vendor + * extension are using 0xFC1E for VsMsftOpCode. + */ + switch (ver->hw_variant) { + case 0x11: /* JfP */ + case 0x12: /* ThP */ + case 0x13: /* HrP */ + case 0x14: /* CcP */ + hci_set_msft_opcode(hdev, 0xFC1E); + break; + } + + /* Set the event mask for Intel specific vendor events. This enables + * a few extra events that are useful during general operation. It + * does not enable any debugging related events. + * + * The device will function correctly without these events enabled + * and thus no need to fail the setup. + */ + btintel_set_event_mask(hdev, false); + + return 0; +} + +static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver, + char *fw_name, size_t len, + const char *suffix) +{ + /* The firmware file name for new generation controllers will be + * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step> + */ + snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s", + INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvi_top), + INTEL_CNVX_TOP_STEP(ver->cnvi_top)), + INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top), + INTEL_CNVX_TOP_STEP(ver->cnvr_top)), + suffix); +} + +static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev, + struct intel_version_tlv *ver, + u32 *boot_param) +{ + const struct firmware *fw; + char fwname[64]; + int err; + ktime_t calltime; + + if (!ver || !boot_param) + return -EINVAL; + + /* The firmware variant determines if the device is in bootloader + * mode or is running operational firmware. The value 0x03 identifies + * the bootloader and the value 0x23 identifies the operational + * firmware. + * + * When the operational firmware is already present, then only + * the check for valid Bluetooth device address is needed. This + * determines if the device will be added as configured or + * unconfigured controller. + * + * It is not possible to use the Secure Boot Parameters in this + * case since that command is only available in bootloader mode. + */ + if (ver->img_type == 0x03) { + btintel_clear_flag(hdev, INTEL_BOOTLOADER); + btintel_check_bdaddr(hdev); + } + + /* If the OTP has no valid Bluetooth device address, then there will + * also be no valid address for the operational firmware. + */ + if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) { + bt_dev_info(hdev, "No device address configured"); + set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); + } + + btintel_get_fw_name_tlv(ver, fwname, sizeof(fwname), "sfi"); + err = firmware_request_nowarn(&fw, fwname, &hdev->dev); + if (err < 0) { + if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + return 0; + } + + bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)", + fwname, err); + + return err; + } + + bt_dev_info(hdev, "Found device firmware: %s", fwname); + + if (fw->size < 644) { + bt_dev_err(hdev, "Invalid size of firmware file (%zu)", + fw->size); + err = -EBADF; + goto done; + } + + calltime = ktime_get(); + + btintel_set_flag(hdev, INTEL_DOWNLOADING); + + /* Start firmware downloading and get boot parameter */ + err = btintel_download_fw_tlv(hdev, ver, fw, boot_param, + INTEL_HW_VARIANT(ver->cnvi_bt), + ver->sbe_type); + if (err < 0) { + if (err == -EALREADY) { + /* Firmware has already been loaded */ + btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED); + err = 0; + goto done; + } + + /* When FW download fails, send Intel Reset to retry + * FW download. + */ + btintel_reset_to_bootloader(hdev); + goto done; + } + + /* Before switching the device into operational mode and with that + * booting the loaded firmware, wait for the bootloader notification + * that all fragments have been successfully received. + * + * When the event processing receives the notification, then the + * BTUSB_DOWNLOADING flag will be cleared. + * + * The firmware loading should not take longer than 5 seconds + * and thus just timeout if that happens and fail the setup + * of this device. + */ + err = btintel_download_wait(hdev, calltime, 5000); + if (err == -ETIMEDOUT) + btintel_reset_to_bootloader(hdev); + +done: + release_firmware(fw); + return err; +} + +static int btintel_bootloader_setup_tlv(struct hci_dev *hdev, + struct intel_version_tlv *ver) +{ + u32 boot_param; + char ddcname[64]; + int err; + struct intel_debug_features features; + struct intel_version_tlv new_ver; + + bt_dev_dbg(hdev, ""); + + /* Set the default boot parameter to 0x0 and it is updated to + * SKU specific boot parameter after reading Intel_Write_Boot_Params + * command while downloading the firmware. + */ + boot_param = 0x00000000; + + btintel_set_flag(hdev, INTEL_BOOTLOADER); + + err = btintel_prepare_fw_download_tlv(hdev, ver, &boot_param); + if (err) + return err; + + /* check if controller is already having an operational firmware */ + if (ver->img_type == 0x03) + goto finish; + + err = btintel_boot(hdev, boot_param); + if (err) + return err; + + btintel_clear_flag(hdev, INTEL_BOOTLOADER); + + btintel_get_fw_name_tlv(ver, ddcname, sizeof(ddcname), "ddc"); + /* Once the device is running in operational mode, it needs to + * apply the device configuration (DDC) parameters. + * + * The device can work without DDC parameters, so even if it + * fails to load the file, no need to fail the setup. + */ + btintel_load_ddc_config(hdev, ddcname); + + /* Read the Intel supported features and if new exception formats + * supported, need to load the additional DDC config to enable. + */ + err = btintel_read_debug_features(hdev, &features); + if (!err) { + /* Set DDC mask for available debug features */ + btintel_set_debug_features(hdev, &features); + } + + /* Read the Intel version information after loading the FW */ + err = btintel_read_version_tlv(hdev, &new_ver); + if (err) + return err; + + btintel_version_info_tlv(hdev, &new_ver); + +finish: + /* Set the event mask for Intel specific vendor events. This enables + * a few extra events that are useful during general operation. It + * does not enable any debugging related events. + * + * The device will function correctly without these events enabled + * and thus no need to fail the setup. + */ + btintel_set_event_mask(hdev, false); + + return 0; +} + static int btintel_setup_combined(struct hci_dev *hdev) { const u8 param[1] = { 0xFF }; @@ -1769,7 +2258,7 @@ static int btintel_setup_combined(struct hci_dev *hdev) case 0x12: /* ThP */ case 0x13: /* HrP */ case 0x14: /* CcP */ - /* TODO: call setup routine for bootloader product */ + err = btintel_bootloader_setup(hdev, &ver); break; default: bt_dev_err(hdev, "Unsupported Intel hw variant (%u)", @@ -1796,8 +2285,24 @@ static int btintel_setup_combined(struct hci_dev *hdev) /* Display version information of TLV type */ btintel_version_info_tlv(hdev, &ver_tlv); - /* TODO: Need to filter the device for new generation */ - /* TODO: call setup routine for tlv based bootloader product */ + /* Check for supported iBT hardware variants of this firmware + * loading method. + * + * This check has been put in place to ensure correct forward + * compatibility options when newer hardware variants come + * along. + */ + switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) { + case 0x17: + case 0x18: + case 0x19: + err = btintel_bootloader_setup_tlv(hdev, &ver_tlv); + break; + default: + bt_dev_err(hdev, "Unsupported Intel hw variant (%u)", + INTEL_HW_VARIANT(ver_tlv.cnvi_bt)); + return -EINVAL; + } return err; } @@ -1841,6 +2346,7 @@ int btintel_configure_setup(struct hci_dev *hdev) hdev->manufacturer = 2; hdev->setup = btintel_setup_combined; hdev->shutdown = btintel_shutdown_combined; + hdev->hw_error = btintel_hw_error; hdev->set_diag = btintel_set_diag_combined; hdev->set_bdaddr = btintel_set_bdaddr; @@ -1848,6 +2354,35 @@ int btintel_configure_setup(struct hci_dev *hdev) } EXPORT_SYMBOL_GPL(btintel_configure_setup); +void btintel_bootup(struct hci_dev *hdev, const void *ptr, unsigned int len) +{ + const struct intel_bootup *evt = ptr; + + if (len != sizeof(*evt)) + return; + + if (btintel_test_and_clear_flag(hdev, INTEL_BOOTING)) + btintel_wake_up_flag(hdev, INTEL_BOOTING); +} +EXPORT_SYMBOL_GPL(btintel_bootup); + +void btintel_secure_send_result(struct hci_dev *hdev, + const void *ptr, unsigned int len) +{ + const struct intel_secure_send_result *evt = ptr; + + if (len != sizeof(*evt)) + return; + + if (evt->result) + btintel_set_flag(hdev, INTEL_FIRMWARE_FAILED); + + if (btintel_test_and_clear_flag(hdev, INTEL_DOWNLOADING) && + btintel_test_flag(hdev, INTEL_FIRMWARE_LOADED)) + btintel_wake_up_flag(hdev, INTEL_DOWNLOADING); +} +EXPORT_SYMBOL_GPL(btintel_secure_send_result); + MODULE_AUTHOR("Marcel Holtmann <marcel@xxxxxxxxxxxx>"); MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION); MODULE_VERSION(VERSION); diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h index 17cb62ac33f6..5a8a696eecf2 100644 --- a/drivers/bluetooth/btintel.h +++ b/drivers/bluetooth/btintel.h @@ -207,17 +207,15 @@ int btintel_read_boot_params(struct hci_dev *hdev, struct intel_boot_params *params); int btintel_download_firmware(struct hci_dev *dev, struct intel_version *ver, const struct firmware *fw, u32 *boot_param); -int btintel_download_firmware_newgen(struct hci_dev *hdev, - struct intel_version_tlv *ver, - const struct firmware *fw, - u32 *boot_param, u8 hw_variant, - u8 sbe_type); void btintel_reset_to_bootloader(struct hci_dev *hdev); int btintel_read_debug_features(struct hci_dev *hdev, struct intel_debug_features *features); int btintel_set_debug_features(struct hci_dev *hdev, const struct intel_debug_features *features); int btintel_configure_setup(struct hci_dev *hdev); +void btintel_bootup(struct hci_dev *hdev, const void *ptr, unsigned int len); +void btintel_secure_send_result(struct hci_dev *hdev, + const void *ptr, unsigned int len); #else static inline int btintel_check_bdaddr(struct hci_dev *hdev) @@ -321,14 +319,6 @@ static inline int btintel_download_firmware(struct hci_dev *dev, return -EOPNOTSUPP; } -static inline int btintel_download_firmware_newgen(struct hci_dev *hdev, - const struct firmware *fw, - u32 *boot_param, - u8 hw_variant, u8 sbe_type) -{ - return -EOPNOTSUPP; -} - static inline void btintel_reset_to_bootloader(struct hci_dev *hdev) { } @@ -350,4 +340,13 @@ static inline int btintel_configure_setup(struct hci_dev *hdev) return -ENODEV; } +static inline void btintel_bootup(struct hci_dev *hdev, + const void *ptr, unsigned int len) +{ +} + +static inline void btintel_secure_send_result(struct hci_dev *hdev, + const void *ptr, unsigned int len) +{ +} #endif diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index f4b631673e89..e9434c04c566 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -48,7 +48,6 @@ static struct usb_driver btusb_driver; #define BTUSB_BCM_PATCHRAM 0x400 #define BTUSB_MARVELL 0x800 #define BTUSB_SWAVE 0x1000 -#define BTUSB_INTEL_NEW 0x2000 #define BTUSB_AMP 0x4000 #define BTUSB_QCA_ROME 0x8000 #define BTUSB_BCM_APPLE 0x10000 @@ -60,7 +59,6 @@ static struct usb_driver btusb_driver; #define BTUSB_WIDEBAND_SPEECH 0x400000 #define BTUSB_VALID_LE_STATES 0x800000 #define BTUSB_QCA_WCN6855 0x1000000 -#define BTUSB_INTEL_NEWGEN 0x2000000 #define BTUSB_INTEL_BROKEN_INITIAL_NCMD 0x4000000 static const struct usb_device_id btusb_table[] = { @@ -360,27 +358,27 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x1286, 0x204e), .driver_info = BTUSB_MARVELL }, /* Intel Bluetooth devices */ - { USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_NEW | + { USB_DEVICE(0x8087, 0x0025), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES }, - { USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_NEW | + { USB_DEVICE(0x8087, 0x0026), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH }, - { USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_NEW | + { USB_DEVICE(0x8087, 0x0029), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH }, - { USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_NEWGEN | + { USB_DEVICE(0x8087, 0x0032), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH}, - { USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_NEWGEN | + { USB_DEVICE(0x8087, 0x0033), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES }, { USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR }, { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_INTEL_BROKEN_INITIAL_NCMD }, { USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED }, - { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW | + { USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x8087, 0x0aa7), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH }, - { USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_NEW | + { USB_DEVICE(0x8087, 0x0aaa), .driver_info = BTUSB_INTEL_COMBINED | BTUSB_WIDEBAND_SPEECH | BTUSB_VALID_LE_STATES }, @@ -1994,49 +1992,21 @@ static int inject_cmd_complete(struct hci_dev *hdev, __u16 opcode) static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer, int count) { + struct hci_dev *hdev = data->hdev; + /* When the device is in bootloader mode, then it can send * events via the bulk endpoint. These events are treated the * same way as the ones received from the interrupt endpoint. */ - if (test_bit(BTUSB_BOOTLOADER, &data->flags)) + if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) return btusb_recv_intr(data, buffer, count); return btusb_recv_bulk(data, buffer, count); } -static void btusb_intel_bootup(struct btusb_data *data, const void *ptr, - unsigned int len) -{ - const struct intel_bootup *evt = ptr; - - if (len != sizeof(*evt)) - return; - - if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) - wake_up_bit(&data->flags, BTUSB_BOOTING); -} - -static void btusb_intel_secure_send_result(struct btusb_data *data, - const void *ptr, unsigned int len) -{ - const struct intel_secure_send_result *evt = ptr; - - if (len != sizeof(*evt)) - return; - - if (evt->result) - set_bit(BTUSB_FIRMWARE_FAILED, &data->flags); - - if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) && - test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) - wake_up_bit(&data->flags, BTUSB_DOWNLOADING); -} - static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) { - struct btusb_data *data = hci_get_drvdata(hdev); - - if (test_bit(BTUSB_BOOTLOADER, &data->flags)) { + if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) { struct hci_event_hdr *hdr = (void *)skb->data; if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff && @@ -2050,7 +2020,7 @@ static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) * the device sends a vendor specific event * indicating that the bootup completed. */ - btusb_intel_bootup(data, ptr, len); + btintel_bootup(hdev, ptr, len); break; case 0x06: /* When the firmware loading completes the @@ -2058,7 +2028,7 @@ static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) * indicating the result of the firmware * loading. */ - btusb_intel_secure_send_result(data, ptr, len); + btintel_secure_send_result(hdev, ptr, len); break; } } @@ -2069,14 +2039,13 @@ static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb) static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb) { - struct btusb_data *data = hci_get_drvdata(hdev); struct urb *urb; BT_DBG("%s", hdev->name); switch (hci_skb_pkt_type(skb)) { case HCI_COMMAND_PKT: - if (test_bit(BTUSB_BOOTLOADER, &data->flags)) { + if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) { struct hci_command_hdr *cmd = (void *)skb->data; __u16 opcode = le16_to_cpu(cmd->opcode); @@ -2128,641 +2097,6 @@ static int btusb_send_frame_intel(struct hci_dev *hdev, struct sk_buff *skb) return -EILSEQ; } -static int btusb_setup_intel_new_get_fw_name(struct intel_version *ver, - struct intel_boot_params *params, - char *fw_name, size_t len, - const char *suffix) -{ - switch (ver->hw_variant) { - case 0x0b: /* SfP */ - case 0x0c: /* WsP */ - snprintf(fw_name, len, "intel/ibt-%u-%u.%s", - le16_to_cpu(ver->hw_variant), - le16_to_cpu(params->dev_revid), - suffix); - break; - case 0x11: /* JfP */ - case 0x12: /* ThP */ - case 0x13: /* HrP */ - case 0x14: /* CcP */ - snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s", - le16_to_cpu(ver->hw_variant), - le16_to_cpu(ver->hw_revision), - le16_to_cpu(ver->fw_revision), - suffix); - break; - default: - return -EINVAL; - } - - return 0; -} - -static void btusb_setup_intel_newgen_get_fw_name(const struct intel_version_tlv *ver_tlv, - char *fw_name, size_t len, - const char *suffix) -{ - /* The firmware file name for new generation controllers will be - * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step> - */ - snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s", - INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver_tlv->cnvi_top), - INTEL_CNVX_TOP_STEP(ver_tlv->cnvi_top)), - INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver_tlv->cnvr_top), - INTEL_CNVX_TOP_STEP(ver_tlv->cnvr_top)), - suffix); -} - -static int btusb_download_wait(struct hci_dev *hdev, ktime_t calltime, int msec) -{ - struct btusb_data *data = hci_get_drvdata(hdev); - ktime_t delta, rettime; - unsigned long long duration; - int err; - - set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); - - bt_dev_info(hdev, "Waiting for firmware download to complete"); - - err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING, - TASK_INTERRUPTIBLE, - msecs_to_jiffies(msec)); - if (err == -EINTR) { - bt_dev_err(hdev, "Firmware loading interrupted"); - return err; - } - - if (err) { - bt_dev_err(hdev, "Firmware loading timeout"); - return -ETIMEDOUT; - } - - if (test_bit(BTUSB_FIRMWARE_FAILED, &data->flags)) { - bt_dev_err(hdev, "Firmware loading failed"); - return -ENOEXEC; - } - - rettime = ktime_get(); - delta = ktime_sub(rettime, calltime); - duration = (unsigned long long)ktime_to_ns(delta) >> 10; - - bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration); - - return 0; -} - -static int btusb_intel_download_firmware_newgen(struct hci_dev *hdev, - struct intel_version_tlv *ver, - u32 *boot_param) -{ - const struct firmware *fw; - char fwname[64]; - int err; - struct btusb_data *data = hci_get_drvdata(hdev); - ktime_t calltime; - - if (!ver || !boot_param) - return -EINVAL; - - /* The firmware variant determines if the device is in bootloader - * mode or is running operational firmware. The value 0x03 identifies - * the bootloader and the value 0x23 identifies the operational - * firmware. - * - * When the operational firmware is already present, then only - * the check for valid Bluetooth device address is needed. This - * determines if the device will be added as configured or - * unconfigured controller. - * - * It is not possible to use the Secure Boot Parameters in this - * case since that command is only available in bootloader mode. - */ - if (ver->img_type == 0x03) { - clear_bit(BTUSB_BOOTLOADER, &data->flags); - btintel_check_bdaddr(hdev); - } - - /* If the OTP has no valid Bluetooth device address, then there will - * also be no valid address for the operational firmware. - */ - if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) { - bt_dev_info(hdev, "No device address configured"); - set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); - } - - btusb_setup_intel_newgen_get_fw_name(ver, fwname, sizeof(fwname), "sfi"); - err = firmware_request_nowarn(&fw, fwname, &hdev->dev); - if (err < 0) { - if (!test_bit(BTUSB_BOOTLOADER, &data->flags)) { - /* Firmware has already been loaded */ - set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); - return 0; - } - - bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)", - fwname, err); - - return err; - } - - bt_dev_info(hdev, "Found device firmware: %s", fwname); - - if (fw->size < 644) { - bt_dev_err(hdev, "Invalid size of firmware file (%zu)", - fw->size); - err = -EBADF; - goto done; - } - - calltime = ktime_get(); - - set_bit(BTUSB_DOWNLOADING, &data->flags); - - /* Start firmware downloading and get boot parameter */ - err = btintel_download_firmware_newgen(hdev, ver, fw, boot_param, - INTEL_HW_VARIANT(ver->cnvi_bt), - ver->sbe_type); - if (err < 0) { - if (err == -EALREADY) { - /* Firmware has already been loaded */ - set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); - err = 0; - goto done; - } - - /* When FW download fails, send Intel Reset to retry - * FW download. - */ - btintel_reset_to_bootloader(hdev); - goto done; - } - - /* Before switching the device into operational mode and with that - * booting the loaded firmware, wait for the bootloader notification - * that all fragments have been successfully received. - * - * When the event processing receives the notification, then the - * BTUSB_DOWNLOADING flag will be cleared. - * - * The firmware loading should not take longer than 5 seconds - * and thus just timeout if that happens and fail the setup - * of this device. - */ - err = btusb_download_wait(hdev, calltime, 5000); - if (err == -ETIMEDOUT) - btintel_reset_to_bootloader(hdev); - -done: - release_firmware(fw); - return err; -} - -static int btusb_intel_download_firmware(struct hci_dev *hdev, - struct intel_version *ver, - struct intel_boot_params *params, - u32 *boot_param) -{ - const struct firmware *fw; - char fwname[64]; - int err; - struct btusb_data *data = hci_get_drvdata(hdev); - ktime_t calltime; - - if (!ver || !params) - return -EINVAL; - - /* The firmware variant determines if the device is in bootloader - * mode or is running operational firmware. The value 0x06 identifies - * the bootloader and the value 0x23 identifies the operational - * firmware. - * - * When the operational firmware is already present, then only - * the check for valid Bluetooth device address is needed. This - * determines if the device will be added as configured or - * unconfigured controller. - * - * It is not possible to use the Secure Boot Parameters in this - * case since that command is only available in bootloader mode. - */ - if (ver->fw_variant == 0x23) { - clear_bit(BTUSB_BOOTLOADER, &data->flags); - btintel_check_bdaddr(hdev); - - /* SfP and WsP don't seem to update the firmware version on file - * so version checking is currently possible. - */ - switch (ver->hw_variant) { - case 0x0b: /* SfP */ - case 0x0c: /* WsP */ - return 0; - } - - /* Proceed to download to check if the version matches */ - goto download; - } - - /* Read the secure boot parameters to identify the operating - * details of the bootloader. - */ - err = btintel_read_boot_params(hdev, params); - if (err) - return err; - - /* It is required that every single firmware fragment is acknowledged - * with a command complete event. If the boot parameters indicate - * that this bootloader does not send them, then abort the setup. - */ - if (params->limited_cce != 0x00) { - bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)", - params->limited_cce); - return -EINVAL; - } - - /* If the OTP has no valid Bluetooth device address, then there will - * also be no valid address for the operational firmware. - */ - if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) { - bt_dev_info(hdev, "No device address configured"); - set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks); - } - -download: - /* With this Intel bootloader only the hardware variant and device - * revision information are used to select the right firmware for SfP - * and WsP. - * - * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi. - * - * Currently the supported hardware variants are: - * 11 (0x0b) for iBT3.0 (LnP/SfP) - * 12 (0x0c) for iBT3.5 (WsP) - * - * For ThP/JfP and for future SKU's, the FW name varies based on HW - * variant, HW revision and FW revision, as these are dependent on CNVi - * and RF Combination. - * - * 17 (0x11) for iBT3.5 (JfP) - * 18 (0x12) for iBT3.5 (ThP) - * - * The firmware file name for these will be - * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi. - * - */ - err = btusb_setup_intel_new_get_fw_name(ver, params, fwname, - sizeof(fwname), "sfi"); - if (err < 0) { - if (!test_bit(BTUSB_BOOTLOADER, &data->flags)) { - /* Firmware has already been loaded */ - set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); - return 0; - } - - bt_dev_err(hdev, "Unsupported Intel firmware naming"); - return -EINVAL; - } - - err = firmware_request_nowarn(&fw, fwname, &hdev->dev); - if (err < 0) { - if (!test_bit(BTUSB_BOOTLOADER, &data->flags)) { - /* Firmware has already been loaded */ - set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); - return 0; - } - - bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)", - fwname, err); - return err; - } - - bt_dev_info(hdev, "Found device firmware: %s", fwname); - - if (fw->size < 644) { - bt_dev_err(hdev, "Invalid size of firmware file (%zu)", - fw->size); - err = -EBADF; - goto done; - } - - calltime = ktime_get(); - - set_bit(BTUSB_DOWNLOADING, &data->flags); - - /* Start firmware downloading and get boot parameter */ - err = btintel_download_firmware(hdev, ver, fw, boot_param); - if (err < 0) { - if (err == -EALREADY) { - /* Firmware has already been loaded */ - set_bit(BTUSB_FIRMWARE_LOADED, &data->flags); - err = 0; - goto done; - } - - /* When FW download fails, send Intel Reset to retry - * FW download. - */ - btintel_reset_to_bootloader(hdev); - goto done; - } - - /* Before switching the device into operational mode and with that - * booting the loaded firmware, wait for the bootloader notification - * that all fragments have been successfully received. - * - * When the event processing receives the notification, then the - * BTUSB_DOWNLOADING flag will be cleared. - * - * The firmware loading should not take longer than 5 seconds - * and thus just timeout if that happens and fail the setup - * of this device. - */ - err = btusb_download_wait(hdev, calltime, 5000); - if (err == -ETIMEDOUT) - btintel_reset_to_bootloader(hdev); - -done: - release_firmware(fw); - return err; -} - -static int btusb_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec) -{ - struct btusb_data *data = hci_get_drvdata(hdev); - ktime_t delta, rettime; - unsigned long long duration; - int err; - - bt_dev_info(hdev, "Waiting for device to boot"); - - err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING, - TASK_INTERRUPTIBLE, - msecs_to_jiffies(msec)); - if (err == -EINTR) { - bt_dev_err(hdev, "Device boot interrupted"); - return -EINTR; - } - - if (err) { - bt_dev_err(hdev, "Device boot timeout"); - return -ETIMEDOUT; - } - - rettime = ktime_get(); - delta = ktime_sub(rettime, calltime); - duration = (unsigned long long) ktime_to_ns(delta) >> 10; - - bt_dev_info(hdev, "Device booted in %llu usecs", duration); - - return 0; -} - -static int btusb_intel_boot(struct hci_dev *hdev, u32 boot_addr) -{ - struct btusb_data *data = hci_get_drvdata(hdev); - ktime_t calltime; - int err; - - calltime = ktime_get(); - - set_bit(BTUSB_BOOTING, &data->flags); - - err = btintel_send_intel_reset(hdev, boot_addr); - if (err) { - bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err); - btintel_reset_to_bootloader(hdev); - return err; - } - - /* The bootloader will not indicate when the device is ready. This - * is done by the operational firmware sending bootup notification. - * - * Booting into operational firmware should not take longer than - * 1 second. However if that happens, then just fail the setup - * since something went wrong. - */ - err = btusb_boot_wait(hdev, calltime, 1000); - if (err == -ETIMEDOUT) - btintel_reset_to_bootloader(hdev); - - return err; -} - -static int btusb_setup_intel_new(struct hci_dev *hdev) -{ - struct btusb_data *data = hci_get_drvdata(hdev); - struct intel_version ver; - struct intel_boot_params params; - u32 boot_param; - char ddcname[64]; - int err; - struct intel_debug_features features; - - BT_DBG("%s", hdev->name); - - /* Set the default boot parameter to 0x0 and it is updated to - * SKU specific boot parameter after reading Intel_Write_Boot_Params - * command while downloading the firmware. - */ - boot_param = 0x00000000; - - /* Read the Intel version information to determine if the device - * is in bootloader mode or if it already has operational firmware - * loaded. - */ - err = btintel_read_version(hdev, &ver); - if (err) { - bt_dev_err(hdev, "Intel Read version failed (%d)", err); - btintel_reset_to_bootloader(hdev); - return err; - } - - err = btintel_version_info(hdev, &ver); - if (err) - return err; - - err = btusb_intel_download_firmware(hdev, &ver, ¶ms, &boot_param); - if (err) - return err; - - /* controller is already having an operational firmware */ - if (ver.fw_variant == 0x23) - goto finish; - - err = btusb_intel_boot(hdev, boot_param); - if (err) - return err; - - clear_bit(BTUSB_BOOTLOADER, &data->flags); - - err = btusb_setup_intel_new_get_fw_name(&ver, ¶ms, ddcname, - sizeof(ddcname), "ddc"); - - if (err < 0) { - bt_dev_err(hdev, "Unsupported Intel firmware naming"); - } else { - /* Once the device is running in operational mode, it needs to - * apply the device configuration (DDC) parameters. - * - * The device can work without DDC parameters, so even if it - * fails to load the file, no need to fail the setup. - */ - btintel_load_ddc_config(hdev, ddcname); - } - - /* Read the Intel supported features and if new exception formats - * supported, need to load the additional DDC config to enable. - */ - err = btintel_read_debug_features(hdev, &features); - if (!err) { - /* Set DDC mask for available debug features */ - btintel_set_debug_features(hdev, &features); - } - - /* Read the Intel version information after loading the FW */ - err = btintel_read_version(hdev, &ver); - if (err) - return err; - - btintel_version_info(hdev, &ver); - -finish: - /* All Intel controllers that support the Microsoft vendor - * extension are using 0xFC1E for VsMsftOpCode. - */ - switch (ver.hw_variant) { - case 0x11: /* JfP */ - case 0x12: /* ThP */ - case 0x13: /* HrP */ - case 0x14: /* CcP */ - hci_set_msft_opcode(hdev, 0xFC1E); - break; - } - - /* Set the event mask for Intel specific vendor events. This enables - * a few extra events that are useful during general operation. It - * does not enable any debugging related events. - * - * The device will function correctly without these events enabled - * and thus no need to fail the setup. - */ - btintel_set_event_mask(hdev, false); - - return 0; -} - -static int btusb_setup_intel_newgen(struct hci_dev *hdev) -{ - struct btusb_data *data = hci_get_drvdata(hdev); - u32 boot_param; - char ddcname[64]; - int err; - struct intel_debug_features features; - struct intel_version_tlv version; - - bt_dev_dbg(hdev, ""); - - /* Set the default boot parameter to 0x0 and it is updated to - * SKU specific boot parameter after reading Intel_Write_Boot_Params - * command while downloading the firmware. - */ - boot_param = 0x00000000; - - /* Read the Intel version information to determine if the device - * is in bootloader mode or if it already has operational firmware - * loaded. - */ - err = btintel_read_version_tlv(hdev, &version); - if (err) { - bt_dev_err(hdev, "Intel Read version failed (%d)", err); - btintel_reset_to_bootloader(hdev); - return err; - } - - err = btintel_version_info_tlv(hdev, &version); - if (err) - return err; - - err = btusb_intel_download_firmware_newgen(hdev, &version, &boot_param); - if (err) - return err; - - /* check if controller is already having an operational firmware */ - if (version.img_type == 0x03) - goto finish; - - err = btusb_intel_boot(hdev, boot_param); - if (err) - return err; - - clear_bit(BTUSB_BOOTLOADER, &data->flags); - - btusb_setup_intel_newgen_get_fw_name(&version, ddcname, sizeof(ddcname), - "ddc"); - /* Once the device is running in operational mode, it needs to - * apply the device configuration (DDC) parameters. - * - * The device can work without DDC parameters, so even if it - * fails to load the file, no need to fail the setup. - */ - btintel_load_ddc_config(hdev, ddcname); - - /* Read the Intel supported features and if new exception formats - * supported, need to load the additional DDC config to enable. - */ - err = btintel_read_debug_features(hdev, &features); - if (!err) { - /* Set DDC mask for available debug features */ - btintel_set_debug_features(hdev, &features); - } - - /* Read the Intel version information after loading the FW */ - err = btintel_read_version_tlv(hdev, &version); - if (err) - return err; - - btintel_version_info_tlv(hdev, &version); - -finish: - /* All Intel new genration controllers support the Microsoft vendor - * extension are using 0xFC1E for VsMsftOpCode. - */ - switch (INTEL_HW_VARIANT(version.cnvi_bt)) { - case 0x17: - case 0x18: - case 0x19: - hci_set_msft_opcode(hdev, 0xFC1E); - break; - } - - /* Set the event mask for Intel specific vendor events. This enables - * a few extra events that are useful during general operation. It - * does not enable any debugging related events. - * - * The device will function correctly without these events enabled - * and thus no need to fail the setup. - */ - btintel_set_event_mask(hdev, false); - - return 0; -} - -static int btusb_shutdown_intel_new(struct hci_dev *hdev) -{ - struct sk_buff *skb; - - /* Send HCI Reset to the controller to stop any BT activity which - * were triggered. This will help to save power and maintain the - * sync b/w Host and controller - */ - skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT); - if (IS_ERR(skb)) { - bt_dev_err(hdev, "HCI reset during shutdown failed"); - return PTR_ERR(skb); - } - kfree_skb(skb); - - return 0; -} - #define FIRMWARE_MT7663 "mediatek/mt7663pr2h.bin" #define FIRMWARE_MT7668 "mediatek/mt7668pr2h.bin" @@ -4237,18 +3571,16 @@ static int btusb_probe(struct usb_interface *intf, priv_size = 0; + data->recv_event = hci_recv_frame; + data->recv_bulk = btusb_recv_bulk; + if (id->driver_info & BTUSB_INTEL_COMBINED) { /* Allocate extra space for Intel device */ priv_size += sizeof(struct btintel_data); - } - if (id->driver_info & BTUSB_INTEL_NEW) { + /* Override the rx handlers */ data->recv_event = btusb_recv_event_intel; data->recv_bulk = btusb_recv_bulk_intel; - set_bit(BTUSB_BOOTLOADER, &data->flags); - } else { - data->recv_event = hci_recv_frame; - data->recv_bulk = btusb_recv_bulk; } hdev = hci_alloc_dev_priv(priv_size); @@ -4332,6 +3664,7 @@ static int btusb_probe(struct usb_interface *intf, goto out_free_dev; /* Transport specific configuration */ + hdev->send = btusb_send_frame_intel; hdev->cmd_timeout = btusb_intel_cmd_timeout; set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); @@ -4342,38 +3675,6 @@ static int btusb_probe(struct usb_interface *intf, btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD); } - if (id->driver_info & BTUSB_INTEL_NEW) { - hdev->manufacturer = 2; - hdev->send = btusb_send_frame_intel; - hdev->setup = btusb_setup_intel_new; - hdev->shutdown = btusb_shutdown_intel_new; - hdev->hw_error = btintel_hw_error; - hdev->set_diag = btintel_set_diag; - hdev->set_bdaddr = btintel_set_bdaddr; - hdev->cmd_timeout = btusb_intel_cmd_timeout; - set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); - set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks); - } - - if (id->driver_info & BTUSB_INTEL_NEWGEN) { - hdev->manufacturer = 2; - hdev->send = btusb_send_frame_intel; - hdev->setup = btusb_setup_intel_newgen; - hdev->shutdown = btusb_shutdown_intel_new; - hdev->hw_error = btintel_hw_error; - hdev->set_diag = btintel_set_diag; - hdev->set_bdaddr = btintel_set_bdaddr; - hdev->cmd_timeout = btusb_intel_cmd_timeout; - set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks); - set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); - set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks); - - data->recv_event = btusb_recv_event_intel; - data->recv_bulk = btusb_recv_bulk_intel; - set_bit(BTUSB_BOOTLOADER, &data->flags); - } - if (id->driver_info & BTUSB_MARVELL) hdev->set_bdaddr = btusb_set_bdaddr_marvell; -- 2.25.1