From: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
The some legacy ROM controllers have a bug with the first HCI command
sent to it returning number of completed commands as zero, which would
stall the command processing in the Bluetooth core.
As a workaround, send HCI Rest command first which will reset the
controller to fix the issue.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@xxxxxxxxx>
---
drivers/bluetooth/btintel.c | 20 ++++++++++++++++++++
drivers/bluetooth/btintel.h | 1 +
drivers/bluetooth/btusb.c | 7 ++++++-
3 files changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
index a4c8329a8945..2cf3cdf8f9cb 100644
--- a/drivers/bluetooth/btintel.c
+++ b/drivers/bluetooth/btintel.c
@@ -1675,6 +1675,26 @@ static int btintel_setup_combined(struct hci_dev *hdev)
BT_DBG("%s", hdev->name);
+ /* The some controllers have a bug with the first HCI command sent to it
+ * returning number of completed commands as zero. This would stall the
+ * command processing in the Bluetooth core.
+ *
+ * As a workaround, send HCI Reset command first which will reset the
+ * number of completed commands and allow normal command processing
+ * from now on.
+ */
+ if (btintel_test_flag(hdev, INTEL_BROKEN_INITIAL_NCMD)) {
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev,
+ "sending initial HCI reset failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+ }
+
/* Starting from TyP device, the command parameter and response are
* changed even though the OCF for HCI_Intel_Read_Version command
* remains same. The legacy devices can handle even if the
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
index fb5e73ef71eb..8a49795ad5af 100644
--- a/drivers/bluetooth/btintel.h
+++ b/drivers/bluetooth/btintel.h
@@ -144,6 +144,7 @@ enum {
INTEL_FIRMWARE_LOADED,
INTEL_FIRMWARE_FAILED,
INTEL_BOOTING,
+ INTEL_BROKEN_INITIAL_NCMD,
__INTEL_NUM_FLAGS,
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 53216274764a..f4b631673e89 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -61,6 +61,7 @@ static struct usb_driver btusb_driver;
#define BTUSB_VALID_LE_STATES 0x800000
#define BTUSB_QCA_WCN6855 0x1000000
#define BTUSB_INTEL_NEWGEN 0x2000000
+#define BTUSB_INTEL_BROKEN_INITIAL_NCMD 0x4000000
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
@@ -372,7 +373,8 @@ static const struct usb_device_id blacklist_table[] = {
BTUSB_WIDEBAND_SPEECH |
BTUSB_VALID_LE_STATES },
{ USB_DEVICE(0x8087, 0x07da), .driver_info = BTUSB_CSR },
- { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED },
+ { USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL_COMBINED |
+ BTUSB_INTEL_BROKEN_INITIAL_NCMD },
{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL_COMBINED },
{ USB_DEVICE(0x8087, 0x0a2b), .driver_info = BTUSB_INTEL_NEW |
BTUSB_WIDEBAND_SPEECH },
@@ -4335,6 +4337,9 @@ static int btusb_probe(struct usb_interface *intf,
set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
+
+ if (id->driver_info & BTUSB_INTEL_BROKEN_INITIAL_NCMD)
+ btintel_set_flag(hdev, INTEL_BROKEN_INITIAL_NCMD);
}
if (id->driver_info & BTUSB_INTEL_NEW) {
--
2.25.1
